HYTRONIK SAM15/TY IP65 Zhaga Book 18 Motion Sensor Instruction Manual
- June 9, 2024
- HYTRONIK
Table of Contents
HYTRONIK SAM15TY IP65 Zhaga Book 18 Motion Sensor
Product Description
SAM15/TY is a Bluetooth 0-10V signal output motion sensor, with Zhaga connector. It is suitable for high-bay application and simple device setup and commissioning can be done via app.
Features
Use Tuya smart for commissioning
Grouping luminaires via mesh network
0-10V analogue signal
Tri-level dimming control based upon occupancy (also known as corridor
function)
Robust HF Robust HF antenna design wireless interference
12V constant voltage output
Zhaga Book 18
IP IP65
High-bay (up to 15m height)
Device firmware update over-the-air
5-year warranty
Technical Specifications
Input & Output Characteristics
Mains voltage| 12VDC
Stand-by power| <0.3W
Environment
Operation temperature| Ta: -20O C ~ +60O C
IP rating| IP65
Sensor Data
Sensor principle| High Frequency (microwave)
Operation frequency| 5.8GHz +/- 75MHz
Transmission power| <1mW
Detection range (Max.)*| Installation Height : 15m Detection Range(Ø) :20m @
8m height
Detection angle| 30°~ 150°
Mechanical Structure & Dimensions
Wiring Diagram
Functions and Features
Tri-level Control (Corridor Function)
Hytronik builds this function inside the motion sensor to achieve tri-level control, for some areas which require a light change notice before switch-off. The sensor offers 3 levels of light: 100%–>dimmed light (natural light is insuffcient) –>off; and 2 periods of selectable waiting time: full light duration and microlight duration; Selectable daylight threshold and freedom of detection area.
-
With sufficient natural light, the light does not switch on when presence is detected.
-
With sufficient natural light, the light does not switch on when presence is detected.
-
After full light duration, the light dims to micro brightness if the surrounding natural light is below the daylight threshold
-
Light switches off automatically after the microlight duration elapses.
Highlight
Robust HF Sensors Design — Anti-interference Technology
Hytronik’s microwave motion sensor uses 5.8GHz high frequency (HF) antenna in the product design. With the increasing density of wireless environments such as 5G GSM tower and 5G Wi-Fi coverage, this has created extra challenges for sensor’s operation because the air is shared by all kinds of wireless signals, and transmissions from any device at the similar frequency could potentially cause interference. The effects of interference which can be noticed by users are usually false triggering of sensors (turning on/off erratically), or lights staying on even after hold time etc. To get around such tough environment, Hytronik has developed a new series of robust HF modules, designed to be loaded with our own special sophiscated software algorithms. These robust HF modules can withstand different types of wireless interferences in the real application. We believe this is the ultimate solution towards demanding installation environments in the Future.
Grouping luminaires via mesh network
- Grouping the primary tri-proof light with the secondary tri-proof light with APP setting.
- When the primary tri-proof light receives Bluetooth signal, it transmits to the the secondary tri-proof light so the tri-proof lights switch on at the same time.
*All the settings can be finished on the APP
Placement Guide and Typical Range
The smart device with the App installed will have a typical range of 10m, but
varies from device to device. During commissioning, the installer will need to
be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will
start communicating within the wireless mesh. This means that once the network
is complete, all devices are accessible from the smart device when in a 20m
range of a single point
Detection Pattern
Additional Information / Documents
- Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
- Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download->knowledge ->Hytronik Standard Guarantee Policy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>