vodafone R228T Mobile Broadband User Manual
- June 9, 2024
- Vodafone
Table of Contents
vodafone R228T Mobile Broadband
INSTRUCTION
Power-saving modes
After 30 seconds without a button being pressed, all the LED lights will turn off. Press any button to turn them on again. After 10 minutes without the Wi- Fi being used, the mobile network connection will turn off. When you press any key or when a device accesses the Wi-Fi, the network will be connected again automatically. After 30 minutes without the Wi-Fi being used, the Wi-Fi network will turn off. Press any button to turn the Wi-Fi network back on.
Using the web interface at vodafone mobile.wifi
You can find the web interface on vodafonemobile.wifi if it doesn’t appear automatically when you connect. Then login using the default password which can be found on the reminder card or on the label inside the device. Then you can see your network and Wi-Fi status, how much data you have used, get help and support, and even send and receive SMS messages from your computer. This device is dual-band and uses two frequencies (2.4GHz & 5GHz) for better performance. You can change the frequency band in Settings / Quick Setup.
Buttons and LED
The buttons
Power button
- Press and hold for 3 seconds to power on or off your device.
- Press and hold for 10 seconds to reboot your device.
Reset
- Press the reset button with a pin for 3 seconds to reset the device to factory mode.
What the lights mean
- Signal
- Solid blue – The device is connected to the network
- Solid red – Weak network signal or SIM card not available
- Flashing blue – the device is disconnected from the network
- Wi-Fi
- Solid blue – Wi-Fi is enabled Off – Wi-Fi is off
- SMS
- Solid blue – New message(s) Flashing blue – SMS inbox is full
- Fast flashing blue – Device update available at vodafone mobile.wifi
- Off – No new message Battery
- Solid blue – Battery level: 21%
- Flashing blue – The device is charging
- Solid red – Battery level is low