key digital KD-IP1080 AV over IP Transmitter with Redundant Power User Guide
- June 9, 2024
- Key Digital
Table of Contents
key digital KD-IP1080 AV over IP Transmitter with Redundant Power
KD-IP1080 AV over IP Quick Setup Guide
Your Transmitters (TXs) and Receivers (RXs) are pre-configured to your specifications (see attached).
Follow these instructions for a 1, 2, 3 AV over IP experience:
- Begin with all TXs and RXs and other network equipment disconnected from the AVOIP network switch
- Configure your Network Switch
- We have attached setup instructions for the network switch that you told us you will use. Please see the following pages
- If you did not tell us which network switch you will use or have changed network switches, you MUST use a switch from our Verified Switches List (QR code)
- See pages 4-7 for brands & models. Setup instructions for each follow
- If you are stacking network switches, you must use a 1G fiber SFP
- Install TXs and RXS
- Do not stack units. Units must have proper ventilation or damage may occur
- Ensure that all CAT5e/6 terminations are proper
- For TXs, connect HDMI sources to HDMI Input (not the HDMI Pass-through)
- Connect TXs and RXs into Network Switch and Power ON the Network Switch
- IMPORTANT: Network Switch must already be configured (step #2 above)
- Wait 5-10 minutes for the equipment to bootup
- Connect KD-MC1000 or KD-CX800 control interface devices to the network if applicable.
- Connect Window’s PC into Network with ethernet cable
- Set a unique static IP address to your PC, matching the first 3 octets of the TXs and RXs
- Download KDMS Pro (QR Code) and extract zip file. Open KDMS_Pro application.
- IMPORTANT: Do not remove the application from the folder
- Choose SCAN > NETWORK SCAN and KDMS Pro will find your system
- Control the system using KDMS Pro’s control UI section
- For HDMI routing, choose the display first, then the desired source
- IMPORTANT: Do not adjust ENC or DEC properties without consulting Technical Support
- If applicable, you may now add your WIFI router to the network, join the WIFI network from your iPad, download the Key Digital App and control the system.
521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>