Key digital KD-PS42 4-Input 4K 18G Presentation Switcher User Guide
- June 4, 2024
- Key Digital
Table of Contents
KD-PS42
4K/18G Presentation Switcher with
4 Inputs (HDBT, 3xHDMI), 2 Mirrored Outputs
(HDBT, HDMI), Audio De-Embed, IR, RS-232,
IP, CEC Manager™. Includes Rx.
Quick Setup Guide
KD-PS42 4-Input 4K 18G Presentation Switcher
Always follow the instructions provided in this Quick Setup Guide.
http://keydigital.com/product.aspx?ItemCode=KDPS42
Default IP Address: 192.168.1.239
Please visit www.keydigital.com for the latest
product documentation and software downloads. Product features and
specifications are subject to change without notice.
KD-PS42
Key Digital ® KD-PS42 is a 4K/18G KD-App Ready Presentation Switcher kit
with CEC Manager ™, auto switching, and audio de-embedding creating a user-
friendly, simplified presentation system. KDPS42 features three HDMI and one
HDBaseT input which integrates natively with HDMI + Display Port wall plate,
KD-X2x1WDTx (sold separately). Mirrored HDMI and HDBaseT outputs enable
audience + presenter views and the HDBaseT output marries in with the included
KD-X40MRx for integrating monitors or projectors up to 40m / 131ft away when
the selected source is outputting 4K/UHD (up to 70m / 230ft at 1080p).
Designed for professional audio video installations in conference rooms, board
rooms, classrooms, lecture halls, auditoriums, and more, KD-PS42 enables
multiple video sources to be displayed on up to two connected displays while
analog (balanced/unbalanced) and digital (PCM) audio de-embed ports feed audio
of the selected source into an amplifier, DSP, or sound bar. Integrating KD-
PS42 with KD-AMP220 will enable an app-ready all-in-one solution for control
of video switching with sound and speech enforcement. Key Digital CEC Manager
™ enables basic controls of the connected displays for a simplistic all-in-one
integration system. KD-PS42 presentation switcher supports all SD, HD, VESA,
and Ultra HD/4K video standards with HDR header information included in a
variety of 4K EDID handshakes. In addition to IR,
RS-232, and TCP/IP control, KD-PS42 can also be controlled via trigger voltage
and features status monitoring LEDs.
Key Features
- Presentation Switcher Kit: Includes KD-PS42 and KD-X40MRx. Add KD-X2x1WDTx wall plate HDBaseT transmitter for the plug-in on walls, floor, and table boxes
- Presentation Switching: 3 HDMI, 1 HDBaseT source selection by push button, IP, RS-232, IR, auto-switching, or trigger control.
- Ultra HD/4K: Supports up to 4096×2160 or 3840×2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
- CEC Manager™: Power, volume, and muting controls of the connected display/projector without any additional control wiring. Selection of desired CEC command recipient.
- KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager™
- Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors.
- KD-AMP220 Control Mode: Command forward to KD-Amp220 for an all-in-one user-friendly control UI of video switching, audio, and speech enforcement
- HDCP Licensing: Fully licensed and compatible with HDCP 2 .2
- HDR10 and Dolby Vision: More life-like images through a greater range of luminance levels
- Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-PS42
- Installation: Half-rack width with rack and under-table mounting ears included
- Signal Extension: For resolution and cable quality » 4K/UHD (18G): Up to 40m / 131ft
- 1080p: Up to 70m / 230ft › Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit › Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, EDID Control handshake, and Hot Plug Detection Voltage
- EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
- RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit
- Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
- EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the output/display 1
- Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus, DTS-HD Master Audio™, and Dolby® Atmos
- Control System Support: Key Digital® App ready. Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
CONNECT
Test for proper operation of the unit and cables in your system before permanently securing the unit for final installation. Ensure that you leave enough ventilation space to provide sufficient airflow and cooling.
Begin with the KD-PS42 unit, KD-X40MRx, Key Digital wall-plate transmitter (sold separately), all input/output devices, and the audio system powered off.
-
Connect HDMI sources to the input ports of the KD-PS42 unit
-
(Optional) Connect HDMI and Display Port / VGA sources to the wall-plate transmitter (sold separately)
-
Connect HDMI displays/projectors to KD-PS42’s HDMI output and the HDMI output port of the KDX40MRx unit
-
Connect CAT wire from KD-PS42’s HDBaseT outputs to KD-X40MRx HDBaseT input and (optional) from KD-PS42’s HDBaseT input to wall-plate transmitter (sold separately)
-
Connect analog or digital audio to the audio system
-
If utilizing KD-AMP220 integration control mode, connect RS-232 wiring from KD-PS42 Tx and Ground into KD-AMP220 Rx and Ground. See Operation Manual for more info.
-
For unit control, connect the control system and/or PC to TCP/IP, RS-232, or place an IR emitter over IR sensor
-
Connected monitors are controlled by CEC Manager ™ on the HDMI connection. Alternately, connect IR/RS-232 wiring from the control system into the pass-thru ports of KD-PS42 and IR/RS-232 ports of the KD-X40MRx
-
Screw-in the power supply to the KD-PS42 unit, and then connect the power to the outlets.
-
Power on HDMI sources and displays
Application Example
Note: 18Gbps signal extension requires all 18Gbps supported HDMI cables.
CONFIGURE
Configure and control KD-PS42 with Key Digital® Management Software™ Pro (KDMS™ Pro) (Download Software Zip).
-
Connect to KD-PS42 from your PC using the USB micro port on the face of the unit
-
Open the Key Digital® Management Software™ Pro software and perform a USB scan (fig . 1)
-
Choose the detected device from the Devices window (fig . 2a)
-
Set the desired Device Name in the KD-PS42 Information window (fig . 2b)
-
In the Network Settings section of the Properties window, enter the desired IP settings (fig . 2c)
» a . IP Address (default is 192 .168 .1 .239)
» b. Subnet Mask (default is 255 .255 .255 .0)
» c . Gateway (default is 192 .168 .1 .1)
» d. Port (default is 23)
» Note: If using KD-App, please do not change the port number. -
Save (fig . 2d)
-
Use the EDID rotary on the rear of the unit to choose the desired handshake that you wish to provide to your connected HDMI source.
-
If using KD-App or Key Digital® Management Software™ (KDMS™ ) set the desired Input/Output names by entering the Input/Output Settings section of the properties window, and selecting the Change Input/Output Name button (fig . 3a), selecting the desired input/output and entering the name (fig . 3b):
-
If utilizing the KD-AMP220 integration control mode, choose the KD-AMP220 Control selection box in the Audio/Video properties section. To control the mix level of KD-AMP220’s microphone input, choose the selection box for Microphone Control (fig . 4):
-
Additional settings may be adjusted in the KDMS software. Full access to all settings/commands is achieved via terminal session using Tera Term or PuTTy software.
-
Ensure that CEC is enabled on your displays/projectors. Depending on the manufacturer, HDMI- CEC may be given a different name. View THIS article for a list of CEC names and how to enable CEC on popular displays.
-
Your unit is now ready to control from the KDMS Control Panel, KD-App, or by the professional control system.
CONTROL
Option 1: Control via Remote Control
http://www.keydigital.com/items.asp?ItemCode=KDAPP&Company=KEY
- Display Control via CEC Manager™ buttons at the top left and top right
- Input selection via buttons at the bottom
- Note: Blue buttons at the center are for KD-CAM USB control. KD-CAM USB does not natively integrate with KD-PS42.
Option 2: Control via KD-App, Key Digital® Management Software™ Pro
KD-PS42 is controllable by Key Digital’s user-friendly iOS App (downloadable in the App Store) or Key Digital® Management Software™ Pro (downloadable here).
- Connect and Configure your KD-PS42 as described in this Connect & Configure sections
- Download and open KD-App and/or KDMS™ Pro
- Ensure the iOS device and/or PC computer are on the same network with KD-PS42
- Perform a network scan in the KD-App and/or KDMS™ Pro
- Select and control the selected KD-PS42
- To enter KDMS™ Pro end-user mode, key CTRL + ALT + N after selecting the KD-PS42
Option 3: Control via the professional control system
KD-PS42 allows control over the serial interface for bi-directional
communication.
-
For RS-232 control use pins 4, 5, and 6 of the Main Control port
-
For TCP/IP control, the default static IP address is 192.168.1.239, with port 23
-
For the past 10 years, most Key Digital switches have supported a standard HDMI switching command. KD-PS42 is also controllable by this command, so if you have previously integrated Key Digital matrixes by third-party control systems you may have success using the same driver/module.
-
Switching – Video + Audio together (two commands supported)
» SPO01SIyy
» Spotify| yy = input number (01-02)
yy = input number (01-02)
---|---
Test for proper operation of the unit and cables in your system before
permanently securing the unit for final installation. Ensure that you leave
enough ventilation
space to provide sufficient airflow and cooling.
https://keydigital.org/category/presentation-switchers-and-tiling-processors /KD-PS42
Visit keydigital.com for a Complete Manual Please visit
www.keydigital.com for the full manual and
software downloads.
Important Product Warnings:
- Connect all cables before providing power to the unit.
- Test for proper operation before securing the unit behind walls or in hard-to-access spaces.
- If installing the unit into the wall or mounting the bracket into sheetrock, provide proper screw support with bolts or sheetrock anchors.
Safety Instructions:
Please be sure to follow these instructions for the safe operation of your
unit.
- Read and follow all instructions.
- Heed all warnings.
- Do not use this device near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including:
» Damage to the power supply or power plug
» Exposure to rain or moisture
Power Supply Use:
You MUST use the Power Supply PROVIDED with your unit or you VOID the Key
Digital® Warranty and risk damage to your unit and associated equipment.
Contacting Key Digital®
Technical Support
For technical questions about using Key Digital® products, please contact us
at:
- Phone: 914-667-9700
- E-mail: tech@keydigital.com
Repairs and Warranty Service
Should your product require warranty service or repair, please obtain a Key
Digital® Return Material Authorization (RMA) number by contacting us at:
- Phone: 914-667-9700
- E-mail: rma@keydigital.com
Warranty Information
All Key Digital® products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a Key Digital Limited 3-Year Product Warranty Policy. http://www.keydigital.com/warranty.htm
Key Digital®, led by digital video pioneer Mike Tsinberg, develops and
manufactures high-quality, cutting-edge technology solutions for virtually all
applications where high-end video and control are important. Key Digital® is
at the forefront of the video industry for Home
Theater Retailers, Custom Installers, System Integrators,
Broadcasters, Manufacturers, and Consumers.
Key Digital®
:: 521 East 3rd Street:: Mount Vernon, NY 10553
Phone: 914.667.9700
Fax: 914.668.8666
Web:www.keydigital.com
© 2019 Key Digital, Inc . All rights reserved.
Documents / Resources
| Key
digital KD-PS42 4-Input 4K 18G Presentation
Switcher
[pdf] User Guide
KD-PS42, 4-Input 4K 18G Presentation Switcher, Presentation Switcher, 4-Input
4K 18G Switcher, Switcher, KD-PS42
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>