NEMO ELLISSE Double, Double MEGA Instruction Manual

: June 9, 2024
: NEMO

Table of Contents

NEMO ELLISSE Double, Double MEGA
Box contents
Installation
CAUTION
Lamping
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEMO ELLISSE Double, Double MEGA

NEMO-ELLISSE-Double,-Double-MEGA-PRODUCT

Box contents

$NEMO-ELLISSE-Double,-Double-MEGA-FIG- $1$$

Installation

Check the position of the numbers (1,2,3,4,5 and 6) inside the canopy $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $2$$
Check the number on the wire locks $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $3$$
Adjust the orientation of Ellisse $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $4$$ $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $5$$
Connect the lock to the correspondent number inside the canopy
A-Minor (small) $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $6$$
B-Major (big) $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $7$$
Cable length adjustment for tilting $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $8$$
Lock the cable
- A- Avvitare complement Tighten completely
- B- Fissare il cavo Lock the cable
Electrical connections $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $10$$
A-Lamp connection (24V) $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $11$$
B-110V or 230V connection $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $12$$
C-Dimming connections (1-10V) $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $13$$
Canopy closure $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $14$$ $NEMO-ELLISSE-Double,-Double-MEGA-FIG- $15$$

CAUTION

Symbols and guarantees of the fixture are described in the enclosed sheet.
Disconnect power before proceeding with the installation of the fixture.
In the absence of the IP symbol, fi xture is only for indoor installation.
Use only bulbs of a suitable type and power specified in the label.
Safety is guaranteed only if installation is carried out by a qualified electrician.
Products with anodized finishes could show different color shades due to the industrial galvanic process. Shades have to be considered as aesthetic elements of the product.
The polishing process is hand-made. Shades are therefore due to this manual process.
Dimensions of products made with deformations of extrusions could be subject to changes of ±1cm.
As blown glass is produced by traditional craft techniques, its thickness, color, and finish are subject to variations,a feature that makes each piece unique.
Do not install fixtures in ambiances with the presence of chlorine, salt air, or aggressive agents, if not expressly mentioned.
The color temperature (CCT) of LED sources can be different from the declared nominal value between a range of ±5%.
NEMO reserves the right to make any technical or formal alterations to its products without giving prior notice, especially for LED sources.
We recommend you keep instructions for further consultations.

This lamp has been manufactured in conformity with EU Directive 2002/96/EC. The crossed-out wheelie bin symbol marked on the appliance means that it was put on the market after 13th August 2005 and that it must therefore be disposed of separately from household waste. Separate disposal of this product prevents any negative effects on public health and the environment deriving from unsuitable disposal and allows the materials it is made of to be recovered to achieve considerable savings of power and resources.

The end user is responsible for delivering the appliance, at the end of its working life, to a suitable collection facility. Failure to do so will be punished according to the current national legislation. For detailed information on collection systems and methods, please contact the relative office in your town, the local waste disposal service, or the shop where you purchased the product.