HUAWEI FreeBuds SE User Guide

: June 9, 2024
: Huawei

Table of Contents

HUAWEI FreeBuds SE
Pairing
- Factory reset
Shortcut controls
Safety Information
Documents / Resources

HUAWEI FreeBuds SE

Download and install the app

Scan the QR code to download the HUAWEI AI Life app to try more features and customize your earphone settings.

Pairing

Open the charging case, place the earphones inside, and press and hold the Function button for 2s until the indicator flashes white for the earphones to start pairing.
Enable Bluetooth on the device to be paired with the earphones, and search for and connect to the earphones.
The earphones will automatically enter Pairing mode when the case is opened for the first time.

Factory reset

Open the case. Make sure that the earphones are in the charging case. Press and hold the Function button for 10s until the indicator flashes red. The earphones will then enter Pairing mode again.

Shortcut controls

Double-tap
Play/Pause
Answer/End a call
You can customize shortcuts in HUAWEI AI Life.

Replace the ear tips

Use the ear tips that best fit your ears.
The earphones come with medium ear tips installed.

Charging

Earphones: Place the earphones in the case and the earphones automatically start charging.
Case: Connect the case to a USB-C cable to charge it.

Safety Information

Before using and operating this device, read the following precautions to ensure optimal device performance and avoid dangerous use or unauthorized
operations.

To protect your hearing, do not listen to audio at a high volume for a long period of time.

Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and
hearing aids. When using the product, keep it at least 15 cm away from such medical devices. Consult the manufacturer of your medical equipment for
more information.
Ideal temperatures: 0°C to 35°C for operating; -20°C to +45°C for storage.
When charging, an adapter should be plugged into a socket nearby and easily accessible. Use approved power adapters and chargers.
Ensure that the power adapter meets the requirements of Annex Q of IEC/EN 62368-1 and has been tested and approved according to national or local standards.
Observe all local traffic laws and regulations while using this product. Do not use this device when you are driving.
Keep this device and its accessories that may contain small components out of the reach of children. Otherwise, children may damage this device and
its accessories by mistake, or swallow the small components, which may cause choking.
Avoid using the device in dusty, damp, or dirty environments, or near sources of magnetic interference.
Keep the battery away from fire, excessive heat, and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or
squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat,
catch fire, or even explode.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injuries.
Avoid disassembling or modifying your device and its accessories. Unauthorized disassembly and modifications may result in voiding the factory
warranty. If your device is faulty, visit an authorized Huawei Customer Service Center for assistance.

Precautions

Keep the metal contact points on the earphones and charging case clean. Otherwise, the earphones may not function properly.
If you experience skin discomfort when wearing this device, take it off and consult a doctor.
This device’s firmware will automatically update whenever it connects to a previously paired Honor device (released before the end of 2020) or a
previously paired Huawei device, and Wi-Fi or mobile data is enabled. You can disable automatic firmware updates in Settings.

Disposal and recycling information

This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection
points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves
valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household
waste disposal service, or visit the website https://consumer.huawei.com/en/.

UK regulatory conformance
Hereby, Huawei Device Co., Ltd. declares that this device T0010/T0010C is in compliance with the relevant statutory instruments in the UK. The full text of the declaration of conformity is available at the following internet address: https://consumer.huawei.com/certification.

EU Regulatory Conformance
Hereby, Huawei Device Co., Ltd. declares that this device T0010/T0010C is in compliance with the following Directive RED 2014/53/EU, RoHS
2011/65/EU, EU REACH regulation, and Batteries (where included) directive.
The full text of the EU declaration of conformity and most recent information about accessories & software are available at the following internet address:
https://consumer.huawei.com/certification.
Frequency Bands and Power
Bluetooth: 2.4 GHz 14.5 dBm.

RF Exposure Information
This device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device meets applicable national SAR limits of
2.0 W/kg (10g) and 1.6 W/kg (1g).
10g SAR: The highest reported SAR value: Head SAR: 0.41 W/kg.
1g SAR: The highest reported SAR value: Head SAR: 0.66 W/kg.

Legal Notice
Copyright © Huawei 2022. All rights reserved.
All contents in the documents in the packaging box, including but not limited to information about and portrayals of the appearance, color, size, and
supported features of the product (the latest features will come with software updates), are for reference only. The actual product may vary.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of this mark by Huawei Technologies Co.,
Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.

Privacy Protection
To better understand how we protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy, or read the
privacy policy and service terms using the corresponding app.

Software License Agreement
Please read the software license agreement carefully before using this device. By using the device, you indicate that you agree to be bound by the license
agreement. To read the agreement, please visit the following website: https://consumer.huawei.com/en/legal/eula/.

Open Source Software Notice
For the open source software statement of your device, please visit https://consumer.huawei.com/en/opensource/ and search for the device name.
Australia/New Zealand