HUAWEI WS8800 Wifi Mesh User Guide

: October 30, 2023
: Huawei

Table of Contents

Getting Started
Indicator
Frequently Asked Questions (FAQs)
Safety information
Legal Notice
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Model: WS8800
Quick Start Guide

Getting Started

H button
WAN/LAN auto-adaptation port: Connects to the Internet (such as optical modem, broadband modems, etc.) and wired network device such as a computer.
RESET button
Power port

Step 1: Install the app
Scan the QR code to download and install the HUAWEI AI Life App on your mobile phone or tablet. You can use the app to manage your router.

https://smarthome.hicloud.com/d/

If the app is already installed on your phone, make sure you have the latest version of the app.

Step 2: Connect the cables
Connect your router to the optical/broadband/cable modem using a network cable, then connect the router to a power supply.

Optical/broadband/cable modem (from your broadband provider)

HUAWEI WS8800 Wifi Mesh - Connect the cables

If the indicator is steady red, this indicates that the router is not connected to the Internet. Please refer to “Step 3: Set up the router”.
WAN/LAN auto-adaptation port: Connects to the Internet (such as optical modem, broadband modems, etc.) and wired network device such as a computer.

Step 3: Set up the router
Method 1: Configure the router on the app

Connect your mobile phone to the Wi-Fi® of the router connected to the modem (no password required). Check for the Wi-Fi name on the bottom of the router.
Open the app. After the app has detected the router, touch CONFIGURE. If the prompt box does not appear, touch +.
Touch GET STARTED and chose Create a Wi-Fi network.
Choose Internet access mode and enter your broadband account and password.
If your Internet connection does not require an account and password, please skip to the next step. If you need to configure VLAN on your network, contact your broadband carrier to confirm the VLAN parameters, and enable the VLAN switch on the screen.
Set a new Wi-Fi name, Wi-Fi password, and management password for the new router.

Method 2: Configure the router on the web-based management page

Connect your mobile phone to the Wi-Fi of the router connected to the modem (no password required). Check for the Wi-Fi name on the bottom of the router.
Open the browser and you will be automatically redirected to the web-based management page (if the page is not displayed automatically, enter “192.168.3.1” in the browser address bar). Follow the onscreen instructions to configure the router.

Step 4 (optional): Connect the other router(s) to the power supply
If the pack you purchased contains more than one router, the other router(s) will set up a network with the first configured router automatically after being connected to the power supply.
Place the router(s) in the area where you wish to extend Wi-Fi coverage, and connect it to a power supply. Wait for approximately two minutes until the indicator turns steady blue, indicating that the router is connected to the network. You can also check their network connection through the app. HUAWEI
WS8800 Wifi Mesh - power supply HUAWEI
WS8800 Wifi Mesh - best results

For best results, place the routers within 10 meters of each other with one wall in-between at most.
All routers share the same Wi-Fi name and password. When you move across rooms, you will automatically connect to the faster Wi-Fi network.
If a router’s indicator is steady red, this means that it cannot connect to the Internet. Please refer to “Indicator – Steady red” below for more details.

Indicator

Steady blue: Connected to the Internet.
Steady red: Not connected to the Internet.
For the router that is connected to the modem:

Ensure that the Ethernet cable is not loose and connected correctly.
Contact your carrier to check for any network failure.
For the router(s) that is/are not connected to the modem:
Ensure that the distance between two routers is less than 10 meters and there are no more than one wall in between.

Flashing: The router has detected a pairable device.
When other HUAWEI devices (support HarmonyOS Connect) are detected, the indicator on the HUAWEI WiFi Mesh 7 will flash. When this happens, touch the HUAWEI WiFi Mesh 7’s H button. The indicator should flash quickly, indicating that the pairable device is connecting to the HUAWEI WiFi Mesh 7.
The connection process is complete when the indicator stops flashing.

If you touch the H button accidentally, wait for approximately two minutes and the indicator will be back to normal automatically.
The H button also features WPS functionality.

Frequently Asked Questions (FAQs)

1. What should I do if after configuring my router, my mobile phone automatically connects to the Wi-Fi network of the previously connected optical/broadband/cable modem instead of the Wi-Fi network of my router?

It is recommended that you disable the Wi-Fi network of your previous optical/broadband/cable modem to reduce potential signal interference with your router.

2. What should I do if the router is not recognized on the app?

• Ensure that you have the latest version of the app. • Ensure that your phone is connected to the Wi-Fi network of the router that is connected to the modem and is to be configured. • Ensure that all routers are new or restored to factory settings. • Ensure that the router's power supply is well connected. Wait until the router completes the startup process and try again.

3. What should I do if I encounter any of the following issues during the configuration of the router?

4. How do I restore the router to its factory settings?

Connect the router to the power supply and wait until the router completes the startup process. Use a needle or pin to press the RESET button on the router for more than two seconds until the indicator light goes out. Wait for the router to complete the restart process. When the indicator turns red, this indicates that the router has been restored to its factory settings. If the configured router has been restored to factory settings, you need to configure it again. Then restore the other router(s) to the factory settings so that it/they can automatically connect to the configured router.

5. How do I connect an add-on HUAWEI router to my HUAWEI WiFi Mesh 7 to expand the Wi-Fi network?

6. How do I connect a Wi-Fi device to my router using WPS?

When your router is powered on, touch its H button, and then press the WPS button on the Wi-Fi device (such as a phone) within two minutes to initiate standard WPS negotiation and connect the Wi-Fi device to the router's Wi-Fi network.

7. How do I use the NFC function of the router to quickly connect to the Wi- Fi network?

Unlock your phone, enable NFC on it, and touch the NFC area on the back against the NFC area on the router, then follow the onscreen instructions to connect the phone to the Wi-Fi network. This feature is available on Android devices that support NFC, but some devices with non-standard NFC may be unable to connect. iOS devices do not support connecting through NFC.

Safety information

Operation and safety

Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Avoid dusty, damp, or dirty environments. Avoid magnetic fields.
Using the device in these environments may result in circuit malfunctions.
Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -40 °C to +70 °C. Extreme heat or cold may damage your device or accessories.
Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.
The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.
Unplug the power adapter from electrical outlets and the device when not in use.
Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.
For optimal Wi-Fi coverage and performance, it is recommended that the installation distance between multiple mesh routers be greater than 2 m when there is line of sight (LOS) Internet.

Disposal and recycling information
The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation, RoHS and Batteries (where included) directive. For declarations of conformity about REACH and RoHS, please visit the website https://consumer.huawei.com/certification.

EU regulatory conformance
Statement
Hereby, Huawei Device Co., Ltd. declares that this device WS8800 is in compliance with the following Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.
The full text of the EU declaration of conformity, the detailed ErP information and most recent information about accessories & software are available at the following internet address: https://consumer.huawei.com/certification.
Restrictions in the 5 GHz band:
The 5150 to 5350 MHz frequency range is restricted to indoor use only in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK.
Frequency Bands and Power
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-5725 MHz: 30dBm.
Frequency Bands and Power (Egypt)
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm.

Legal Notice

Copyright © Huawei 2021. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
Trademarks and Permissions Wi-Fi® , the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Other trademarks, product, service and company names mentioned may be the property of their respective owners.
Version Update
In order to improve the security of the product and provide you with a better user experience, we will push version update information to you on a regular basis when an important update is released.

Privacy Policy
To better understand how we use and protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy.
End User License Agreement
Please read and agree to the End User License Agreement (HUAWEI EULA) on the product’s management page before using the product.
For More Help
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.