tp-link X50 AX3000 Whole Home Mesh Wi-Fi 6 System Installation Guide

: June 4, 2024
: tp-link

Table of Contents

Getting Started
LED Status
Safety Information
GNU General Public License Notice
Documents / Resources

Quick Installation Guide

Getting Started

Download the TP-Link Deco app for iOS or Android. The app will walk you through the setup.

https://www.tp-link.com/app/qrcode/?app=deco

Need Help?
For answers to frequently asked questions (FAQs) and technical support, please go to

https://www.tp-link.com

Navigate to Deco’s support page

the Deco app

Swipe right at the main page and select Help from the menu.

LED Status

Each Deco has an LED light that changes color according to its status. See the explanation below.

LED	DECO STATUS
Pulse Yellow	Deco is resetting.
Solid Yellow	Deco is starting up.
Pulse Blue	Deco is ready for setup.
Solid Blue	Deco is setting up.
Pulse Green/Pulse White	Deco is upgrading firmware.
Solid Green/Solid White	Deco is all set up and connected to the internet.
Pulse Red	The satellite Deco is disconnected from the main Deco.
Solid Red	Deco has an issue.

Safety Information

The adapter shall be installed near the equipment and shall be easily accessible.
Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use a damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Use only power supplies which are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Operating Frequency/max output power
2400MHz ~ 2483.5MHz / 20dBm
5150MHz ~ 5250MHz (Indoor use only) /23dBm
5250MHz ~ 5350MHz (Indoor use only) /23dBm
For Telephony DSL only: 1880MHz ~ 1900MHz /24dBm (conducted power)

For mobile devices only:
LTE Band 1,3,7,8,20,28,38,40/ Power Class 3 WCDMA Band 1,8/ Power Class 3 GSM 900MHz/ Power Class 4 DCS 1800MHz/ Power Class 1
*The actual frequency bands supported by your product may differ from the bands above.

| AT| BE| BG| CH| CY| CZ| DE| DK
---|---|---|---|---|---|---|---|---
EE| EL| ES| Fl| FR| HR| HU| IE
IS| IT| LI| LT| LU| LV| MT| NL
NO| PL| PT| RO| SE| SI| SK| UK(NI)
| UK
---|---

Attention: In Great Britain, the operation in the frequency range 5150MHz – 5350MHz is only permitted indoors.

GNU General Public License Notice

This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”).
As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for the distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Corporation Limited), mail service of a machine-readable copy of the corresponding GPL source code on CD- ROM upon request via email or traditional paper mail. TP-Link will charge a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact GPL@tp- link.com or write to Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong. Additionally, TP-Link provides for a GPL-Code-Centre under https://www .tp-link.com/en/support/gpl/ where the machine readable copies of the GPL source codes used in TP-Link products are available for free download. Please note, that the GPL-Code-Centre is only provided as a courtesy to TP-Link’s customers but may neither offer a full set of source codes used in all products nor always provide the latest or actual version of such source codes.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For further information about GNU General Public License please refer to the following website: https://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf

www.tp-link.com

Documents / Resources

| tp- link X50 AX3000 Whole Home Mesh Wi-Fi 6 System [pdf] Installation Guide
X50 AX3000 Whole Home Mesh Wi-Fi 6 System, X50, AX3000 Whole Home Mesh Wi-Fi 6 System
---|---