Joker MACHINE 08-10 Stalker Shift Linkage Rod Instructions
- June 9, 2024
- Joker MACHINE
Table of Contents
Joker MACHINE 08-10 Stalker Shift Linkage Rod
TOOLS NEEDED
- 7/16″ wrench
- 1/2″ wrench
- 3/16″ allen key/T-Handle
- Blue Loctite
INSTALLATION
NOTE: Use blue Loctite on al hardware
-
Remove stock shift linkage.
NOTE: Avoid motor fins when removing stock hardware. -
Before installing on the bike adjust Joker Machine Shift Linkage Rod to match stock length, but don’t fully heim joint lock nuts untillater.
-
Attach the rear Heim joint to the front side of the rear linkage arm first.
-
Attach the front heim joint to the back side of the font linkage arm and re-use the stock washer.
-
Test and make sure you have the correct length so that the gearshift is okay.
-
Make any final adjustments to heim joints and fully tighten down button head screws and heim joint lock nuts.
Read User Manual Online (PDF format)
Loading......