Joker MACHINE Pre-2000 Lower Dash Panel User Manual
- June 12, 2024
- Joker MACHINE
Table of Contents
LOWER DASH PANEL
User Manual
TOOL FOR MOUNTING SCREW
2000-up Dash mounting screw: Use 1/8” allen wrench
Pre-2000 Dash mounting screw: Use 5/32” Allen wrench
-
Remove seat on 2000-up models.
-
Loosen the acorn nut on the instrument panel only enough to allow some room under the panel.
-
At rear of fuel tank, remove the insert mounting screw and washer securing the leather tank insert
-
Lift up on the rear of the instrument panel and install the lower dash panel. Make sure the lower dash panel is aligned with the instrument panel.
-
Obtain screw, aligned dash with the screw hole. Loosely install the mounting screw to secure the lower portion of the dash panel extension.
-
When properly aligned, tighten the rear mounting screw securely.
-
Tighten the instrument panel acorn nut to 9–11.3 N·m (80–100 in-lbs). After installing seat, pull upward on seat to be sure it is locked in position.
While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. -
Install seat on 2000-up models.
-
Install Lower Mounting Screw
931101-1 000920 D 5/20/2022 For technical support contact Joker
Machine
2245 Kiowa Blvd N. Ste. 100, Lake Havasu City, AZ 86403
PHONE: 909-596-9690,
FAX: 909-596-9693
sales@jokermachine.com,
www.jokermachine.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>