RENPHO RF-EM001 Eye Massager User Manual

June 9, 2024
Renpho

RENPHO RF-EM001 Eye Massager logo

RENPHO RF-EM001 Eye Massager

RENPHO RF-EM001 Eye Massager product

Attention
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Please read and comprehend all the contents of this manual end operate the product according to the instructions.

  1. DO NOT use if you have had en eye operation, or if you have any eye diseases such as glaucoma, cataract, and amotio retinae.
  2.  DO NOT clean the product with water; clean It with cotton soaked in alcohol
  3.  This product has a hot surface; people sensitive to heat should take extra care when using this.
  4.  Juveniles, disabled people, and the elderly should only use this product when properly supervised.
  5. The product is intended tor personal use; It is not intended to replace medical care and medical devices.
  6. DO NOT use if you have any swelling in the eye area.
  7. DO NOT disassemble the product, DO NOT impact or squeeze its interior lithium battery or expose it to fire;
  8. DO NOT use if the battery has been immersed in water
  9. DO NOT use in high temperatures or humid environments. Avoid direct exposure to the sun.
  10. Consult your doctor if you have sensitive skin, allergic dermatitis, or orthopedic bio materials.
  11. Remove contact lenses, hairpins, and hair accessories before using.
  12. Start the eye massager after putting it on in order to avoid damage to the air bag due to over pressure.
  13. Only use the charger (5V 1A, not included) to recharge the eye massager.
  14. You must have your eyes closed while massaging.
  15. DO NOT use sharp objects lo scratch this product

Product Structure

RENPHO RF-EM001 Eye Massager 01

Technical parameters

  • Product name: Eye Massager
  • Model: RF-EM001
  • Input: sv- 1A
  • Rated voltage: 3]V
  • Rated power: 5W
  • Color: White I Black

What’s included

  • 1 x RENPHO Eye Massager
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Warranty Card

Charging

  1.  Use the 5V mobile charger(not included) for charging your eye massager.
  2.  Insert use cable into the socket of the mobile charger.
  3. Softy insert the micro USB plug into the socket of the device, making sure the micro USB is inserted in the right direction.
  4.  Plug the charger into power.
  5.  While charging, the red LED indicator will show. When done charging, the LED will be green. The device will not work while charging is in progress.
  6. The charge duration will be 2-3 hours. Disconnect the power adapter after charging is complete.
    RENPHO RF-EM001 Eye Massager 02

Note: Toe adapter is not included.

Volume adjustment
Short press  to control volume, and the volume will tum up/down continuously, the volume change is  No volume-volume 1-volume 2-volume 3-volume 4- volume 5(max)-no volume.

Wireless/BT Pairing
Hold   button for 3 seconds to enter Wireless/BT pairing mode, 011 your phone or tablet enter your Wireless/BT settings and select “eye massagers ” to connect. To quit the wireless/BT pairing mode, hold  button till the LED indicator stop flashing.

FAQ and Troubleshooting

RENPHO RF-EM001 Eye Massager 03

If there are other problems, turn off the device and contact us at support@ren­pho.com. REN PHO is not re•ponsible for any damage or injuries that occur if you attempt to disassemble or repair the product yourself.

Cleaning and Maintenance

Attention
Please tum off the power when cleaning, do not use corrosive detergents such as benzene or diluents to clean the product. Do not expose the device to excessive sun or hot temperature.

Guarantee

This product comes with two-year warranty from the date of purchase. Warranty will be voided due to any of the following:
Damaged due to the improper usage or storage. Damaged by attempting to repair or disassemble the device. Period of warranty exceeded.

Notice:
This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obliged to take back your old appliance for disposal at least free of charge.

FCC
Fcc ID: 2APXU-RF-EM001
This device complies with Industry Canada licence-exempt RSS standard(s) and US Electronic Code of Federal Regulet1ons 47 CFR FCC Part 15; Operation is subject to the following three conditions:

  1. This device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation.
  3. This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the I CC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into en outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ IV technician for help.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals