BIXOLON BCD-2000 Customer Display Installation Guide
- June 9, 2024
- BIXOLON
Table of Contents
Display Installation Guide & Safety Guide
KN10-00006A (Rev.1.2)
CUSTOMER DISPLAY BCD-2000
◈ Information
This Installation Guide includes a brief outline of information necessary for product installation. For more detailed installation information, please refer to the user manual in the enclosed CD. The contents of the CD include the following.
- Manual: User Manual, Command Manual, Code Page, Software Manuals
- Drivers: Windows Drivers, OPOS Drivers, VCOM(USB) Drivers
- SDK: mPOS SDK (Android, Windows, iOS)
- Utility: Customer Display Utility
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice. Please refer to the BIXOLON website for the addresses and phone numbers of the company’s headquarters and branch offices.(http://www.bixolon.com)
◈ Product Models & Components
◈ Initial Settings & Options (Serial)
- Direct Connection: Connected to the Display directly without passing through the board.
Item| Display- Serial
---|---
Standard
Model|
How to Connect a
Power Cable to the Serial
Cable|
- Pass Through: Data transmits through Host(PC) → Display → Printer.
Item| Display- Serial
---|---
Standard Model|
Standard Board
Specifications|
Power
(Optional)|
Cable
Types
(Optional)|
◈ Connection Types (BCD-2000A/N/DS/WA/WN/WDS)
Standard
Components| | |
---|---|---|---
Interface| | |
Power Connection 1
(Separate power supply
needed for Rinter/Display)|
–
| |
Power Connection 2 (SMPS→Display →Printer)|
–
| |
Power Connection 3 (SMPS→Display →Printer)|
–
| |
Serial Cable Connection 1 (Host→Display →Printer)|
–
| 
|
Serial Cable Connection 2 (Host→Printer)
(Host→Display)|
–
| | 
Misc.
| A: Power Supply Connector (Output 24VDC, 3pin)
B: Host Interface Connector (D-SUB 25pin, Female)
C: Power Supply Connector (Input 24VDC, 2pin)
D: Display Connector
E: Printer Interface Connector (D-SUB 9pin, Male)
F: Power Supply Connector (Input 24VDC, 3pin)
---|---
◈ How to Connect (BCD-2000AU/NU/WAU/WNU)
- Install the USB Virtual COM driver.
- Connect the display cable to a computer via a USB port.
- Turn on the PC and display. The PC will automatically detect new hardware connected to the USB port.
- Once the driver is installed, the display is ready to receive data.
◈ Swivel
This device can be swiveled freely. Please follow the instructions below to avoid damage or malfunction when installing the device. To change the direction of the display after installation, follow the instructions provided below.
(a) Lower the body to the direction of the arrow. Spin the Nut Holder so the
body goes down.(Refer to the OPEN/CLOSE indications on the product.)
(b) Swivel the body to the angle you want.
※ Caution
Do not turn the body more than once in the same direction.
(The body can be turned indefinitely.)
(c) After adjusting the angle, tighten the Nut Holder. (Keep the body from
swiveling when moving it up and down.) Adjust the height of the body and
tighten the Nut
Holder.
※ Caution
Do not over-tighten the Nut Holder as it can cause damage.
Please tighten so that the body does not move.
◈ Tilting
The device can be tilted to the degree you want.
Please follow the instructions below to avoid damage or malfunction when
installing the device. It can be tilted up to 13° to each side with 4 levels
and 5 positions. (Tilt: max. 52°)
※ Caution
Do not tilt over the limit as it can cause damage.
◈ Safety Precautions
In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
Do not plug several products in one multi-outlet.
- This can provoke over-heating and a fire.
- If the plug is wet or dirty, dry or wipe it before usage.
- If the plug does not fit perfectly with the outlet, do not plug in.
- Be sure to use only standardized multi-outlets.
You must use only the supplied adapter.
- It is dangerous to use other adapters.
Do not pull the cable to unplug.
- This can damage the cable, which is the origin of a fire or a breakdown of the printer.
Keep the plastic bag out of children’s reach.
- If not, a child may put the bag on his head.
Do not plug in or unplug with your hands wet.
- You can be electrocuted.
Do not bend the cable by force or leave it under any heavy object.
- A damaged cable can cause a fire.
CAUTION
Violating following instructions can cause slight wound or damage the
appliance.
If you observe a strange smoke, odor or noise from the printer, unplug it before taking following measures.
- Switch off the printer and unplug the set from the mains.
- After the disappearance of the smoke, call your dealer to repair it.
Keep the desiccant out of children’s reach.
- If not, they may eat it.
Install the printer on the stable surface.
- If the printer falls down, it can be broken and you can hurt yourself.
Use only approved accessories and do not try to disassemble, repair or remodel it for yourself.
- Call your dealer when you need these services.
- Do not touch the blade of auto cutter.
Do not let water or other foreign objects in the printer.
- If this happened, switch off and unplug the printer before calling your dealer.
Do not use the printer when it is out of order. This can cause a fire or an electrocution.
- Switch off and unplug the printer before calling your dealer.
◈ Setting the DIP Switches
RS-232 serial input and command emulation mode settings
※ Caution
Turn off the DIP switch before changing the settings. New DIP switch settings
apply when powered on.
| No. | Function | Switch OFF | Switch ON |
|---|---|---|---|
| 1 | Data Length | 8 bits | 7 bits |
| 2 | Parity check | No | Yes |
| 3 | Selection of parity | Odd | Even |
| 4-6 | Data Rate | sdq 00t6L | |
| --- | --- | --- | --- |
| sdq 0017’8E | 0 | L | L |
| sdq 0097S | L | 0 | L |
| sdq ON’S!, L | 0 | 0 | L |
| alai-pneg | 9 | s | 17 |
(“0” : S/W OFF, “1” : S/W ON)
7-8| Command
Emulation| | 7| 8| Command
Emulation| 7| 8| Command
Emulation
---|---|---|---|---|---
0| 0| ESC/POS| 0| 1| PD6000
1| 0| CD5220| 1| 1| UTC Standard
/ UTC Enhance
(“0” : S/W OFF, “1” : S/W ON)
◈ WEEE (Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is should not be disposed with other household wastes at the end of its working life, To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.