DEFA APDF711310 E-Connect EV Charging Cable User Manual

June 9, 2024
DEFA

DEFA APDF711310 E-Connect EV Charging Cable User Manual
DEFA APDF711310 E-Connect EV Charging Cable

Safety information

Warning! Read this document before using the charging cable. Failure to follow any of the instructions or warnings can result in material damage or personal injury!

WARNINGS

  • The charging cable is designed only for Mode 3 EV charging. Do not use it for any other purpose.

  • Do not use extension cord or adapter.

  • Do not use the charging cable if it is defective or appears cracked, frayed, broken
    or otherwise damaged.

  • Do not plug the charging cable into a damaged, loose or worn power outlet.

  • Do not allow water to enter the electrical outlet or vehicle charging port while charging.

  • Do not insert the plug if the electrical outlet is wet or covered in snow.

HANDLING
Handle the charging cable with care and do not subject it to strong force or impact. Do not pull, twist, tangle, drag or step on the charging cable.

HANDLING

HANDLING

HANDLING

The docking unit is an accessory, see Accessories and spare parts for information

Components

  1. Charging cable
  2. Plug cap
  3. Storage strap
  4. Vehicle plug
  5. Charging station plug
    INSTRUCTION
    INSTRUCTION

How to charge

 Please read your vehicle’s charging instructions before using the charging cable.

PLUG IN

Check the outlet on charging station and the inlet on vehicle before inserting the plugs.

  1. Insert the vehicle plug into the vehicle inlet
  2. Insert the charging station plug into the charging station
     Make sure both plugs are properly connected and charging starts.
     Do not disconnect the charging cable from the charging station while the vehicle is charging.

PLUG IN

UNPLUG

After charging is completed or terminated:

  1. Unplug the charging cable from the vehicle
  2. Unplug the charging cable from the charging station

PROPER CONNECTION

 The plug must be fully inserted into the outlet of the charging station. Failure to do so will  prevent the charging station from locking the plug in place and start charging.

POWER CONNECTION

PLUG CAP

The plug strap can adjust the cap’s position. This prevents the cap from collecting water  and dirt, and keeps the cap clear of the vehicle during charging.

ADJUST CAP POSITION

Maintenance, cleaning and storage

MAINTENANCE
Keep the plugs dry and check them regularly for dust, dirt, pebbles, etc. Remove the plug from the charging station occasionally, do not leave it in the outlet.

CLEANING
When cleaning the charging cable, make sure it is disconnected. Avoid using water or harsh chemicals when cleaning the cable, a damp cloth is suffcient.

STORAGE
Attach the plug cap to protect the plug when storing the cable. Use the storage strap to coil the charging cable for storage or transportaion.

Accessories and spare parts

For information regarding accessories and spare parts, please visit defa.com /ev-charging.

Contact information

Visit defa.com to fnd your country’s contact information.

Technical specifcations

IP rating, connected IP44
Operating temperature [°C] -40 to +55
Storage temperature [°C] -50 to +85
Charging cable type Mode 3
Connection to vehicle/charging station Type 2 / Type 2
Certifcation IEC 62196-1, IEC 62196-2
Recycling EE-waste

Products, product specifcations and data are subject to change without prior notice. See defa.com for the latest revision of this user manual.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals