GE APPLIANCES 82154LO LED Tape Light User Guide
- June 9, 2024
- GE Appliances
Table of Contents
GE APPLIANCES 82154LO LED Tape Light User Guide
IMPORTANT SAFETY INSTRUCTIONS
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- Do not cover this product 33 the covering may cause the flexible light to overheat and melt or ignite.
- Do not operate with the flexible light tightly coiled.
- Do not puncture, cut, shorten, or splice the flexible lighting.
- Do not route the cord flexible or lighting through walls, doors, windows or any like part of the building structure.
- Do not use if there is any damage to the light or cord insulation. Inspect periodically.
- Do not subrmrge flexible light in liquids, or use the product in the vicinity’ of standing water or other liquids.
- Secure this flexible light using only the hangers or clips provided. Do not secure this product or its cord with staples, nails, or like means that may damage the insulation or permanently attach to the building structure.
- Do not 8ubject flexible lighting to continues flexing.
- (J) This product has a polarized plug (one blade is wider than the other) as a feature to radite the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reveme the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cold unless plug can be fully inserted. Lk not afteror replace the plug.
- All units mist be unplugged before adding additional segment.
- Use only the same series extension segment:I model manufactured by the same manufacturer, .
- Ere um all connections and the end cap on the last segment is tightly secured to preclude the entry of water
- Do not install on gates or ciao la, where subject to flexing.
- Do not mount or secure tape light in a manner that can cut the outer Jacket or damage the cord irsubtion. Inspect the tape light carefully before use and discard any tape light that have broken outer jacket, loose connections, or frayed wire insulation.
- Risk of fire. Do not replace attachment ;Aug. Contains a safety devise (fuse) that should not be rerroved. Discard product if the attachment plug is damaged.
- Do not rubor knead the product continuously, the smallest bending radius is more than 8cm.
- Do not operate with the flexible light tightly coiled. To prevent overheating do not albw contact between flexible Ight cables and parts of light cables. Maintain at least 12mm spacing between flexible light cables or parts of Ight cables.
- Do not install in cabinet, tanks or enclosures of any kind.
WARNING-Risk of fire and electric shock, uncoil flexible light prior to plugging into receptacle. SAVE THESE INSTRUCTIONS WARNING: When using “outdoor” use portable lighting products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
- Ground Fault Circuit interrupt (GFC 1) protection should be provided on the circuits or outlet to be used for the outdoor use flexible lighting product. Replaceable are available having built-in GFC1 protection for this Measure of safety.
- Use only outdoor extension cord, such as type SW, SOW, STW, STOW, SJOW, SJTW, or SJTOW. This designation is marked on the wire of the extension cord.
- Do not install closer than 3 meters from a swimming pool surface.
For questionsand/or assistance, call customer service at 1-877-398-7337 or visit the website at www.gaholdaylighting.com
Read User Manual Online (PDF format)
Loading......