everyday baby Glass Baby Bottle Sippy Cup Straw Bottle Instructions

June 3, 2024
everyday baby

everyday logo baby Glass Baby Bottle Sippy Cup Straw Bottle
Instructions

everyday baby Glass Baby Bottle Sippy Cup Straw -

Glass Baby Bottle Sippy Cup Straw Bottle

PRE-USE
When using the new glass bottle for the first time, sterilization should be done. We recommend soaking the bottle and all its parts in a pot of boiling water for five minutes.
DISHWASHING & STERILIZING The bottle and all its parts are dishwashers- and sterilizer-safe. Be extra cautious as the dishwasher may not always fully clean the inner part of the bottle and may leave bacteria behind. For more information, refer to “Use and Care”.
Note: Frequent dishwashing might cause the color to fade over time.
everyday baby Glass Baby Bottle Sippy Cup Straw - Fig3 STORAGE
Do not expose the bottle in direct sunlight for long periods as this will wear down the color prematurely. Store the bottle in an enclosed space at normal room temperature.

USE & CARE

When cleaning baby bottles, sippy, or straw bottles, it is necessary to take them apart. Wash each part separately. – This includes the bottle, screw ring, dust cap, and nipple/spout/straw. This is important as residue from milk and other drinks can build up between the ring and the nipple/spout/straw, leading to bacterial growth. This product is made of borosilicate glass that can withstand rapid changes in temperature, non-toxic medical-grade silicone nipple/spout/straw equipped with a venting system that helps reduce air intake, food-grade silicone coating,PP plastic dust cap and a screw ring. The liquid will never get in contact with any plastic. Nipple only
After washing, rinse the bottle parts thoroughly in clean running water to remove soap suds and residue. Place all the parts of the bottle on a drying rack. Make sure the bottles are left to drain in a well-ventilated location to ensure that they dry thoroughly. Bottles that remain moist for too long are prone to fungus and mold growth. Once all the parts are dry, remember to wash your hands thoroughly with soap and water before handling the parts or feeding your baby.
BOTTLE STERILIZING
The best method for sterilizing glass baby bottles is to simply boil them in a pot of water. To do so, a large pot with water and bring it to a boil, put in the bottle parts to soak, and then cover it with a lid.

WARNING: FOR YOUR CHILD’S HEALTH AND SAFETY
Do not leave the baby unattended while feeding. Do not let the child walk, run or play while holding the bottle. It is not a toy. Accidents can occur when children are left alone with a glass bottle. Children may drop and break the bottle, or fall on the glass shreds when it breaks. Keep the glass bottle and its parts away and out of reach from children when not in use. Glass bottles may break. The silicone coating is protective, but it does not guarantee that the bottle will not break or shatter inside or outside. Before each use, Inspect the glass bottle. If any sign of shatter, cracks, breaks, or weakness inside or outside of the glass bottle, or if dropped/stroked struck against something, discard the bottle immediately. Take extra care when heating using a microwave. A microwave oven heats unevenly from the inside out, so it’s possible for the formula to be hotter inside the bottle and warm on the outside. Always stir heated food or beverage to ensure even heat distribution. Check the temperature before serving. Make sure to remove the dust cap, nipple, and screw ring before microwaving.

BOTTLE NIPPLE/SPOUT/STRAW
Always use this product with adult supervision. Do not use the nipple/spout/straw as a pacifier because continuous and prolonged sucking of fluids can cause tooth decay. Inspect before each use by pulling the nipple/spout/straw in different directions. Dispose the nipple/spout/straw at the first signs of damage or weakness. The nipple/spout/straw should be replaced after two (2) months for safety reasons. Do not leave a nipple/spout/straw in direct sunlight or heat, or leave soaking in disinfectant or sterilizing solution longer than the recommended duration to avoid weakening of the nipple/spout/straw. Before using, place the nipple/spout/straw in boiling water for 5 minutes. This is to maintain proper hygiene. Clean before each use. Always check food or beverage temperature before feeding. The products meet the requirements of the European Standard EN 14350.

everyday logowww.everydaybaby.com
Batch # 2006

Documents / Resources

| everyday baby Glass Baby Bottle Sippy Cup Straw Bottle [pdf] Instructions
Glass Baby Bottle Sippy Cup Straw Bottle, Baby Bottle Sippy Cup Straw Bottle, Sippy Cup Straw Bottle, Straw Bottle
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals