XINVO 2ARZK2436 Sound Machine Lite Instruction Manual

June 1, 2024
Xinvo

XINVO 2ARZK2436 Sound Machine Lite

XINVO -2ARZK2436 -Sound-Machine -Lite-product

Specifications

  • Dimensions: 707085mm
  • Bluetooth version : 5.3
  • Bluetooth range: 10m
  • Charging voltage: 3.7V
  • Speaker output : 3W
  • Battery capacity: 300mAh

Overview

XINVO -2ARZK2436 -Sound-Machine -Lite-fig-1

  1. Bird Sounds
  2. Rain
  3. Fireside
  4. White Noise
  5. Ocean Wave
  6. Wind
  7. On/off button and Play/pause button
  8. Mode switch
  9. Light button and white noise timing button
  10. Next song/next white noise/increase volume
  11. Previous song /previous white noise/reduced volume
  12. White noise timing indicator light
  13. Type-C charging port
  14. Indicator light

Product Usage Instructions

Turn on/off the Sound Machine Lite

Press and hold the On/Off button for 2-3 seconds to turn the device on or off. Use the Bird Sounds, Rain, Fireside, White noise, Ocean Wave, and Wind buttons to play the related white noise. Short press + or – to switch between white noise options. Long press + and – to adjust the volume.

Wireless Mode
When the device is powered on, press the M button to switch to wireless mode. The blue indicator light will flash rapidly. Open the Bluetooth menu on your wireless device and select “Sound Machine Lite” to pair. Once paired successfully, a prompt voice will confirm the connection, and the blue indicator light will remain on. Use the Play/pause button to control music playback, + to skip to the next song, and – to return to the previous song. Long press + to increase volume and – to decrease volume.

Light Settings and White Noise Timer

  • Long press Light button once for low light setting
  • Long press Light button once again for medium light setting
  • Long press Light button once again for high light setting
  • Long press Light button once again to turn off light
  • Short press once to set the white noise timer function for 30minutes
  • Short press again for a timer of 60 minutes
  • Short press again for a timer of 90 minutes
  • Short press again to turn off the timer function

Charging Sound Machine Lite

  • Insert the USB Type-C cable into the charging port
  • Connect the USB-A side into a 5A USB charger or another power source
  • A red light will be on during charging, and it will turn off when fully charged

How to use the white noise

Turn on/off the Sound Machine Lite
Press and hold the On/Off button 2-3 seconds to turn on/off the device. Press “Bird Sounds”, “Rain”, “Fireside”, “White noise”, “Ocean Wave” and “Wind” to play related white noise; Short press “+” or”-” to switch white noise; Long press”+” and “-” to increase and reduce volume .
How to use the wireless mode
When the device is power on, press “M” button to switch wireless mode, the blue indicator light will flash rapidly. Then open the Bluetooth menu on your wireless device and select “Sound Machine Lite” to pair. Once paired successfully, you will hear a prompt voice and the blue indicator light will be on. Press the Play/pause button to play or pause the music. Press “+” to next song, long press to increase volume. Press “-” to previous song, long press to reduce volume.
How to use light button and white noise timing button

  • Long press Light button once for low light setting
  • Long press Light button once again for medium light setting
  • Long press Light button once again for high light setting
  • Long press Light button once again to turn off light
  • Short press once to set the white noise timer function, a blue light will light up and the timer will be set for 30 minutes
  • Short press again, the two blue lights will light up and will be timed for 60 minutes
  • Short press again, the three blue lights will light up and will be timed for 90 minutes
  • Short press again to turn off the timer function

How to charge Sound Machine Lite

  • Insert the USB Type-C cable into the charging port
  • Insert the USB -A side into a 5A USB charger or other power sources
  • During the charging process, a red light will remain on, and the light will be off when fully charged.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.
However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FAQ

What should I do if the device causes interference?
If interference occurs, try reorienting or relocating the receiving antenna, increasing separation between devices, or connecting to a different outlet circuit. Consult a professional if needed.

What happens if I make unauthorized changes to the device?
Unauthorized modifications could void your authority to operate the equipment. Avoid making any changes without explicit manufacturer approval.

What are the FCC compliance regulations for this device?
This device complies with part 15 of the FCC Rules, which state that it must not cause harmful interference and must accept any received interference. The equipment also meets FCC radiation exposure limits for an uncontrolled environment.

Is there a recommended minimum distance for operating the device?
To comply with FCC regulations, maintain a minimum distance of 20cm between the radiator of the device and your body during operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals