allen roth KDN1802A 21.63 Inch Matte Black Traditional Light Post Lantern Instruction Manual
- June 9, 2024
- Allen+Roth
Table of Contents
KDN1802A 21.63 Inch Matte Black Traditional Light Post Lantern
Instruction Manual
ITEM #0338654
OUTDOOR POST LIGHT
KDN1802A 21.63 Inch Matte Black Traditional Light Post Lantern
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF,
LLC. All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 866-439-9800 , 8 a.m. – 8
p.m., EST, Monday – Sunday.
You could also contact us at
partsplus@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes
TOOLS REQUIRED (NOT INCLUDED) 
FEELING CONFIDENT? START YOUR NEXT PROJECT
• Visit lowes.com for more information. 
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges.To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture. 
Feed wires. Twist stripped wire ends together with pliers (not included),
black to black, white to white, and ground/bare to ground/bare. 
Attach BB to
connections with electrical tape (not included). 
Install light bulbs (not included). Use 60-watt max. candelabra-base
incandescent bulbs or CFL/LED equivalents.
Assembly is complete. Turn power
back on.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. | 1. Bulb is burned out. | |
| 2. Faulty wire connection. | 1. Replace light bulb. |
2. Check wiring.
CARE AND MAINTENANCE
- Wipe with damp cloth or use window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
