PROJECT SOURCE 0255320 10.37-in W Black Outdoor Flush Mount Light Instruction Manual
- October 28, 2023
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE 0255320 10.37-in W Black Outdoor Flush Mount Light
INTRODUCTION
Thank you for purchasing this Project Source product. We’ve created these easy to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 866-389-8827 , 8 a.m. – 8 p.m., EST, Monday – Sunday.
You could also contact us at
partsplus@lowes.com.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 194˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
-
Attach A to outlet box using AA.
Temporarily place D through B to determine amount of adjustment necessary for B. Use pliers (not included) to tighten locking nut on B until locking nut touches A.
-
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
-
Attach BB to connections with electrical tape (not included).
-
Place D onto B. Secure with C.
-
Install light bulbs (not included). Use 60-watt max. standard-base incandescent bulbs or CFL/LED equivalents.
-
-
Assembly is complete. Turn power back on.
CARE AND MAINTENANCE
Wipe with damp cloth or use window cleaner. Do not use abrasive cleansers
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
FEELING CONFIDENT? START YOUR NEXT PROJECT
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. |
- Bulb is burned out.
- Faulty wire connection
|
- Replace light bulb.
- Check wiring.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes
TOOLS REQUIRED (NOT INCLUDED)
