Lenco LBT-120BK Bluetooth Turntable with USB User Manual

Model: LBT-120BK

User manual – Turntable with Bluetooth and USB direct encoding

LBT-120BK Bluetooth Turntable with USB

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
4. Install in accordance with the supplied user manual.
5. • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on  the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
6. • Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual.  During file transmission, please handle with care and operate in a static-free environment.
10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an  object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems  may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena,  you should disconnect the plug from the main power socket immediately.
14. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your  home, consult your dealer or local power company.
15. • The socket outlet must be installed near the equipment and must be easily accessible.
16. • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
17. • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
18. • Devices with class 2 construction do not require a earthed connection.
19. Keep away from rodents. Rodents enjoy biting on power cords.
20. • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with  dilute detergent.
23. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
24. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
25. If the unit has USB playback function, the usb memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or  near the apparatus.
27. • To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is  the mains plug of apparatus.
28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
29. Attention should be drawn to the environmental aspects of battery disposal.
30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.
31. The rating label has been marked on the bottom or back panel of the apparatus.
32. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and  knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible  for their safety.
33. This product is intended for non professional use only and not for commercial or industrial use.
34. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position or by failure to follow any  other warning or precaution contained within this user manual will not be covered by warranty.
35. Never remove the casing of this apparatus.
36. Never place this apparatus on other electrical equipment.
37. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.
38. Do not allow children access to plastic bags.
39. Only use attachments/accessories specified by the manufacturer.
40. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power  supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or  moisture, does not operate normally, or has been dropped.
41. • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
42. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.
• • Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

* Those instruction are related only to products using power cable or AC power adaptor.

Information for power adaptor

Power supply adaptor

• Manufacturer: Blue Iron
• Model number: BI12T-120100-I
• Adaptor type: External AC adaptor
• Use only the power supply listed in the user instructions

Assembly

Drive belt:
The belt and turntable platter have been installed properly at factory, but the belt may be loose during transportation. If so, the following  procedures will be taken for belt installation by yourself.
A. Remove the rubber mat from the turntable platter and the E ring from the turntable shaft, then release the turntable platter from the shaft
B. Put the drive belt on the inner rim of the turntable platter and pull it through the hole
C. Hold the belt with your fingers and place the belt onto the motor pulley as shown in the drawing.

D. Clip the E ring on the shaft and place the rubber mat onto the turntable platter.

Caution:

1. Make sure that the drive belt is not twisted or distorted.
2. Avoid oil. Oil splashes will make the belt slippery.

Auto Return Reset:
Always do the reset for Auto Return once you move this product. The mechanism of Auto Return will rotate irregularly when moving and it will  cause the malfunction of Auto Return. The following steps will reset the mechanism to normal.

1. Place a record on the platter and play it.
2. Manually lever the tone arm and place it to the blank part of the end of the record.
3.  The mechanism of Auto Return function will be adjusted properly and the tone arm will automatically return to the arm rest.

Description

1. Adaptor:
   Use this adaptor when playing 45 RPM records.

2. Platter: Place a record here to play.

3. 33/45 RPM Switch:
   Switch 33 or 45 rpm for playing a record at a correct speed.

4. REC:
   Press it to enter into record mode.

5. SPLIT/PAIR (BLUETOOTH)
   Split function: For stopping the current recording, forming a record file manually and then going on recording the next track.
   Pair function: Press this button until the LED indicator starts flashing blue, then put your Bluetooth speaker or headphone into pairing mode.  Then this turntable will connect with the Bluetooth speaker or headphone automatically and the LED indicator will be blue without flashing  after the connection is made. The wireless music playback can start. You can start streaming the music wirelessly!
   Press this button till the LED indicator becomes blue flashing and the Bluetooth connection is disconnected.
   Remark: When you try to pair the turntable, better close the Bluetooth function of the Bluetooth products within 10 meter that you do not  want to pair.

6. Pick-up arm stand

7. Pick-up Arm Lift Stick:
   To raise up and down the Pick-up Arm and cue at a proper place of a vinyl.

8. Pick-up Arm Lock:
   Use this to lock the Pick-up Arm when not in use or for transportation.

9. Dust Cover:
   Use this to protect the turntable from exposure to dust. The cover may be opened or removed during use, but should remain closed when the  turntable is not in use.

10. RCA Line Out Cable
    Connect the RCA line out to a mixer or an amplifier in your sound system.

11. Power Switch:
    For turning the power on or off through this switch. Please switch off the unit after finishing the playing to save the energy..

12. Power Adaptor
    Connect this adaptor to an AC outlet of the proper voltage.

13. USB Port Input:
    Plug in a USB Pen Drive for recording the music from a record.

• The design is only for USB Flash Drive. To prevent the power supply is not sufficient and overheated of the circuit(IC), always get the  external power supply if using a hard drive. 14. Reject
  Press it to force the arm to return directly to the arm rest

  15. LED
      • USB Record Operation and LED Signal Indication
      • USB storage device is not plugged. -> LED light is off
      • USB storage device is plugged in -> LED flashes
      • When the system is ready to record. -> LED light is on
      • Press REC button to start recording. -> LED blinks slowly.
      • Press SPLIT button to create new file in the recording.
      •  Press REC button again to stop recording. -> LED is flashing for a short time, then LED light is on again.

Note: Do not remove the USB storage device if the LED is flashing.

Mains connection
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit is ready to be connected to a correct  voltage of your location.

Amplifier connection
Connect RCA line out cable (10) to the AUX input on your amplifier: Red plug into R channel input.

• White plug into L channel input.

• Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place the adaptor (1) on the record spindle.

• Choose the desired playing speed:
  33 rpm -> button unlocked
  45 rpm-> button locked.

• Release the pick-up arm clip.

• Place the cartridge vertically over the first track of the record, the turntable starts turning.

• When the record is over, the pick-up arm returns to its rest, the turntable stops turning Take care that the pick-up lift stick is in down position,  close pick-up arm lock to secure pick-up arm.

Technical specification

Power Supply: AC100-240 60/50HZ
Power Consumption: 12W
Wow & Flutter: 0.3%
Distortion: 3%~4%
S/N: 50 dB
Audio Output Voltage: 500mV ±200mV
USB: 5V/188 mA

IMPORTANT RECOMMENDATIONS
We advise you to clean your records using an impregnated rag with an antistatic product for maximum enjoyment of your records and also to make them last.
We would also point out that for the same reason your stylus should be replaced periodically (approximately every 250 hours).
Dust the stylus from time to time using a very soft brush dipped in alcohol (brushing from the  back to the front of the cartridge).

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this  documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply  to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Service

For more information and helpdesk support, please visit www.lenco.com

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>