PROJECT SOURCE 4767254 1-Pint Plumbing White Anti-slip Coating Installation Guide

PROJECT SOURCE 4767254 1-Pint Plumbing White Anti-slip Coating

Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m.,
EST, Monday – Sunday. You can also contact us at partsplus@lowes.com

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product

Estimated Assembly Time: 2 Hours

TOOLS REQUIRED

FEELING CONFIDENT

• Visit www.lowes.com for more information.

Anti-Slip Coating provides a slip-resistant surface to bathtub bottoms, shower bases, tile or concrete floors. Designed for applications where a patch area or a defined non-slip/anti-slip surface area is required to save completely refinishing the entire surface. Obviously, no surface treatment can totally prevent falls. However, this will help keep your employees and loved ones safe on all of these surfaces Our Anti-Slip Coatings will increase friction and reduce the likelihood of a fall. The components include either a clear coat or a color-matched coating with a semi-transparent powder added to provide a textured surface. The Quick Glaze system provides a great textured surface for porcelain, cast iron, gelcoat and acrylic bath products as well as tile, concrete or metal surface. If the following procedure is followed, it will have great adhesion to the existing surface. The final surface appearance should have a consistent textured surface as shown in the picture.
Ideal for surfaces such as:

• Bathtub
• Spa Steps
• Boat
• Shower
• Deck
• Pool

Non-slip surface kit can be used on:

• Acrylic
• Fiberglass
• Gelcoat
• Porcelain
• Cast Iron
• Tile

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
• Keep container tightly closed.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Do not breathe dust/fume/gas/mist/vapors/spray.
• Avoid breathing dust/fume/gas/mist/vapors/spray.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Avoid release to the environment.
• Wear protective gloves/protective clothing/eye protection/face protection.
• Flammable liquid and vapor.
• Causes skin irritation. Causes serious eye irritation.
• Harmful if inhaled.
• Suspected of causing genetic defects.
• Suspected of causing cancer.
• May damage fertility or the unborn child.
• Causes damage to organs.
• Causes damage to organs through prolonged or repeated exposure.
• Toxic to aquatic life.

PACKAGE CONTENTS

• Quick Glaze™ Basecoat as a clear-coat or a color matching the original product color
• Quick Glaze Hardener
• Texturing Additive or the Pre-Mixed Combination of Basecoat with Texturing Additive
• Quick Glaze Reducer if thinning is needed
• Gelcoat can be used with the Texturing additive for gelcoat/FRP rather than Quick Glaze
• ¼” Vinyl Contouring Pre-Tape
• 3” Roller Frame
• 3” Premium Enamel Roller Cover, Smooth Nap
• 1 ½” Premium Refinishing Tape
• Wet or Dry Sandpaper (220 or 320 grit)
• Etching cream for enamel or porcelain surfaces
• Polyvinyl alcohol (PVA) spray when gelcoat is used as the coating rather than Quick Glaze
• Heat gun if PVA is used
• Lacquer Thinner
• Etching cream – Only anti slip coatings on tiles (porcelain enamel or tile surfaces)
• Latex Gloves
• Vapor Particulate Respirator

APPLICATION DETAILS

• VENTILATION: Open a window or place a fan for proper ventilation during application and clean up with solvents
• PROTECTION: Wear nitrile gloves to prevent contact with skin. •Use well fitted dust mask
• CLEAN UP: Use Isopropyl alcohol or lacquer thinner to clean up spills or overage.

INSTALLATION OVERVIEW

1. Tape off desired area for the non slip coating treatment
2. Sand surface with 220- or 320- grit wet sandpaper until dull to assure proper adhesion.
3. To mix, shake base well. Mix 4 parts base to 1 part hardener. One hour working time, depending on temperature
4. If thinning is necessary, reduce ratio to 8:1 with the temperature-rated reducer.
5. Apply moderate coat(s) with enamel type paint roller until desired coverage consistency and texture is achieved
6. Remove tape and allow 12 to 24 hours to cure

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>