PROJECT SOURCE 4767239 Black Gloss Tub and Tile Chip Repair Kit User Manual

: June 9, 2024
: PROJECT SOURCE

Table of Contents

PREPARATION
TOOLS REQUIRED
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROJECT SOURCE 4767239 Black Gloss Tub and Tile Chip Repair Kit User Manual

Thank you for purchasing this Project Source product. We’ve created these easy-to follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s . If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You can also contact us at partsplus@lowes.com.

PRODUCT APPLICATIONS

IDEAL FOR:

Chips
Scratches
Gouges
Cast Iron
Enameled Steel
Vitreous China
Porcelain
Ceramic
Gel Coat Fiberglass

USE ON:

Acrylic Paint and painted surfaces such as:

Appliances
Sinks
Tubs
Showers
Stoves
Refrigerators
Washers
Dryers
Antiques -and more

SAFETY INFORMATION

Flammable liquid and vapor.
Causes skin irritation. Causes serious eye irritation.
Harmful if inhaled.
Suspected of causing genetic defects.
Suspected of causing cancer.
May damage fertility or the unborn child.
Causes damage to organs.
Causes damage to organs through prolonged or repeated exposure.
Toxic to aquatic life

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product

Estimated Assembly Time: 2 Hours

TOOLS REQUIRED

FEELING CONFIDENT? START YOUR NEXT PROJECT

Visit www.lowes.com for more information

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools.
Take precautionary measures against static discharge.
Do not breathe dust/fume/gas/mist/vapors/spray.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.•
Wear protective gloves/protective clothing/eye protection/face protection.

PACKAGE CONTENTS

.5 oz. Touch-Up Paint
Brush lid

APPLICATION DETAILS

PREPARATION: In the event metal areas are exposed and rust (oxidation) is present, sand the area with 220 grit sandpaper to remove rust to bare metal. Clean the application area using a clean cloth and isopropyl alcohol for best adhesion of the product.
VENTILATION: Open a window or place a fan for proper ventilation during application and clean up with solvents.
PROTECTION: Wear nitrile gloves to prevent contact with skin.
CLEAN UP: Use Isopropyl alcohol or lacquer thinner to clean up spills or overage.

Sand with 400 grit sandpaper
Clean with acetone or nail polish remover.
SHAKE WELL
Using the supply brush apply the mixture color to the chipped or damaged area in layers.
Allow to tack dry for 7-10 minutes between layers.
A handheld blow dryer can be used to apply moderate heat between layers.
Apply several layers to build up the product for the desired fill or color.
Continue until paint is even with surface.
Keep dry until cured (2 hours).