Russell Hobbs 25290-56 Compact Home Jug Blender User Manual

June 9, 2024
Russell Hobbs

**

Russell Hobbs 25290-56 Compact Home Jug Blender
logo **

Russell Hobbs 25290-56 Compact Home Jug Blender

Russell Hobbs 25290-56 Compact Home Jug Blender
productIMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children must not use or play with the appliance. Keep the appliance and cable out of reach of children.

  • To avoid injury, take care when handling the blades, emptying the jug, and cleaning.
  • Don’t add hot liquid (over 40°C) as it may be ejected due to sudden steaming.

Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service agent, or someone similarly qualified to avoid a hazard.

  • Don’t put the motor unit in liquid.
  •  Switch off (O) before fitting the jug to the motor unit.
  •  Don’t use accessories or attachments other than those we supply.
  •  Don’t use the appliance for any purpose other than those described in these instructions.
  •  Don’t operate the appliance if it’s damaged or malfunctions.
  • Don’t run the motor continuously for more than 2 minutes becasue it may overheat. After 2 minutes switch off for at least 2 minutes to allow the motor to cool.

HOUSEHOLD USE ONLY

DIAGRAMS

Russell Hobbs 25290-56 Compact Home Jug Blender 01

  1. Speed control
  2. Motor unit
  3.  Blade unit
  4. Seal
  5. Jug
  6.  Lid
  7. Cap

BEFORE USING FOR THE FIRST TIME

Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.

USING
In use, treat the jug and blade unit as a single unit.

  1. Sit the motor unit on a stable, level surface.
  2. Check that the speed control is set to O.
  3. Lower the jug onto the motor unit and twist it clockwise to lock it. Your blender will not operate unless the jug is correctly fitted and locked.
  4.  Remove the lid.
  5. Put the ingredients into the jug. Don’t fill past the 800 ml mark. If you do, the contents may force the lid off when you start the motor.
  6. Replace the lid. Don’t operate the appliance without fitting the lid.
  7. Fit the cap to the hole in the lid, and turn it clockwise to lock it.
  8.  Put the plug into the power socket.
  9. Move the speed control to the 1 or 2 position to operate your blender.
  10.  Move and hold the speed control in the Y position to operate your blender in short, controlled bursts.
  11. Release the control to stop.
  12. To add ingredients while the blender is working, remove the cap, pour the new ingredients through the hole, then replace the cap.

When you have finished:

  • Switch the appliance off by moving the speed control to the O position and unplug it.

CARE AND MAINTENANCE

  1.  Switch the appliance off (O) and unplug it.
  2. Wipe the outside of the motor unit with a clean damp cloth.
  3. Hand wash the removable parts.
  •  You may wash these parts in the top rack of a dishwasher.
  •  You may wash these parts in the dishwasher.

If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes. The damage should be cosmetic only, and should not affect the operation of the appliance.

BLADE UNIT

You may wish to remove the blade unit for cleaning.

  1.  Remove the lid.
  2.  Sit the jug upside down.
  3. Unscrew the blade unit and lift it off.
  4. Handle only the plastic – don’t touch the metal parts.
  5. Lift the seal away from the blade unit.
  6.  Wash the seal and blade unit in warm soapy water, rinse, and air dry.
  7. Replace the seal round the blade unit.
  8. Replace the blade unit and screw it firmly onto the bottom of the jug.

RECYCLING
To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.
For recipes, please visit http://eu.russellhobbs.com/recipes/

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Russell Hobbs User Manuals

Related Manuals