Russell Hobbs 25200-56 Retro Hand Mixer Instruction Manual
- October 30, 2023
- Russell Hobbs
Table of Contents
25200-56 Retro Hand Mixer
Product Information
- Brand: Russell Hobbs
- Model: 25200-56
- Usage: Mixer
- Parts:
- On/off button
- Flange
- Whisks (dishwasher safe)
- Hooks (dishwasher safe)
Product Usage Instructions
-
Read the instructions carefully and keep them safe for future
reference. Pass them on if you pass the appliance on. -
Remove all packaging before use.
-
Follow basic safety precautions, including:
-
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been supervised/instructed and understand the hazards
involved. -
Children must not use or play with the appliance. Keep the
appliance and cable out of reach of children. -
Misuse of the appliance may cause injury.
-
Unplug the appliance before assembly, disassembly, or
cleaning. -
Don’t leave the appliance unattended while plugged in.
-
If the cable is damaged, it must be replaced by the
manufacturer, its service agent, or someone similarly qualified, to
avoid hazard. -
Do not use this appliance near bathtubs, showers, basins or
other vessels containing water.
-
-
Fitting the Whisks/Hooks:
-
Switch off (0) and unplug the mixer before fitting or removing
the whisks/hooks. -
Turn each whisk or hook to align the pips on the shaft with the
slots in the drive head, then push it into the drive head till it
clicks into place. -
Each whisk/hook must be fitted into a specific drive head (fig.
A). -
Use both whisks or both hooks, don’t mix them.
-
Removing the Whisks/Hooks:
-
Switch off (0) and unplug the mixer, then shake any excess
mixture into the mixing bowl. -
Hold both whisks/hooks, to prevent them jumping out, and press
5. This will eject them from the drive heads. -
Using the Mixer:
-
Put the plug into the power socket.
-
Press and release the on/off button. The button light will
flash.
r
GB DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
25200-56
I www.russellhobbs.com
b
e
g`
i`
f
f
f
A
L
R
2
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
GB
IMPORTANT SAFEGUARDS
DE
Follow basic safety precautions, including:
FR
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been NL
supervised/instructed and understand the hazards involved.
IT
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
ES
Misuse of the appliance may cause injury.
PT
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
DK
If the cable is damaged, it must be replaced by the manufacturer, its
SE
service agent, or someone similarly qualified, to avoid hazard.
b Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
NO
· Don’t use accessories or attachments other than those we supply.
· Don’t use the appliance for any purpose other than those described in these instructions.
FI
· Don’t use the appliance if it’s damaged or malfunctions.
· Don’t run the motor continuously for more than 5 minutes, it may overheat. After 5 minutes switch RU off for at least 5 minutes, to recover. Your mixer will automatically switch off after 5 minutes of
continuous use.
HOUSEHOLD USE ONLY
CZ
SK PARTS
1. On/off button
4. Hooks
PL
2. Flange
` Dishwasher safe
3. Whisks HR
FITTING THE WHISKS/ HOOKS SI
1. Switch off (0) and unplug the mixer before fitting or removing the
whisks/hooks.
2. Turn each whisk or hook to align the pips on the shaft with the slots in the drive head, then push it into the drive head till it clicks into place.
GR
3. Each whisk/hook must be fitted into a specific drive head (fig. A).
4. Use both whisks or both hooks, don’t mix them.
HU
REMOVING THE WHISKS/HOOKS
TR
1. Switch off (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.
2. Hold both whisks/hooks, to prevent them jumping out, and press 5. This will eject them from the
RO
drive heads.
BG
USING THE MIXER
1. Put the plug into the power socket.
AE
2. Press and release the C button. The C button light will flash.
3
Obsah je uzamcen
Dokoncete, prosím, proces objednávky. Následn budete mít pístup k celému
dokumentu.
Proc je dokument uzamcen? Nahnvat Vás rozhodn nechceme. Jsou k tomu dva hlavní
dvody: 1) Vytvoit a udrzovat obsáhlou databázi návod stojí nejen spoustu úsilí
a casu, ale i financní prostedky.
Dlali byste to Vy zadarmo? Ne. Zakoupením této sluzby obdrzíte úplný návod a
podpoíte provoz a rozvoj nasich stránek. Teba se Vám to bude jest nkdy hodit.
) Mozná zpocátku ano. Ale vzte, ze dotovat to dlouhodob nelze. A rozhodn na
tom nezbohatneme. 2) Pak jsou tady ,,roboti”, kteí se pizivují na nasí práci a
,,vysávají” výsledky naseho úsilí pro svj prospch. Tímto krokem se jim to
snazíme pekazit. A pokud nemáte zájem, respektujeme to. Urgujte svého
prodejce. A kdyz neuspjete, rádi Vás uvidíme!