NAVITEL R66 2K Portable Video Recorder User Manual

NAVITEL R66 2K Portable Video Recorder

Introduction

Dear Customer!
Thank you for purchasing this NAVITEL® product.
NAVITEL R66 2K is a multifunctional high-definition DVR with many functions and features that are described in this User Manual. Please read the manual carefully before using the device and keep it for future reference.

Device layout

1. Power.
2. Lens
3. MicroSD slot
4. Mini-USB port
5. LED indicator
6. Microphone

Package contents

1. DVR NAVITEL R66 2K
2. Windshield mount
3. Car charger 12/24 V
4.  Card reader
5. User manual
6. Warranty card
7. Gift voucher

Specifications

Note: The specifications may change due to upgrades.
Given the super compact size of the dashcam, the device has a microbattery installed, which allows you to correctly save the settings, Wi-Fi password, time and the last file when the power is turned off. If you want to use Parking mode and be able to record after turning off the ignition in the car, it is strongly recommended to use the Navitel Smart Box Max power controller.
*New language packs may be added as a result of firmware updates.

Installation

1. Put the microSD card into the DVR. Use a high-speed SD card (ClassU3 or above); capacity should be within 8-128 GB.
   To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD- card during DVR operation.
   Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card in Menu mode select Format SD-card and confirm it.

2. Secure the device on the windshield with the holder.

3. Connect the car charger to the cigarette lighter socket.

4.  Connect the car charger to the DVR.

5.  Adjust the camera position.

6.  Turn the power on; check whether the device is installed correctly. If the device is installed correctly, the indicator will glow.

Precautions

• Use only the original charger adapter. Using another adapter may negatively affect the device’s battery. Use accessories only approved by manufacturer.
• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).
• Put the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic radiation.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
• Do not disassemble or repair device by yourself. In case of device failure, contact the service center.

Buttons

When you start the car engine, the device will turn on and start recording automatically. In Record mode, press shortly to stop recording.

Device functions

Format SD-card

| Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format SD-card and confirm it.
---|---
Record| Connect the device to an external power supply and it will start recording automatically (indicated by the flashing redlight).
Record audio| Record video with or without sound.
G-sensor| If the vehicle is hit by something, the DVR will automatically lock the current video. Protected files cannot be deleted or overwritten.

Parking monitor*

| In parking mode, the user has access to the following modes: impact control and continuous time-lapse recording.Parking mode

– impact control is based on the operation of the G-sensor: when it is triggered, an emergency file is written. Parking mode – continuous time-lapse recording. Records video continuously at a user-defined frame rate.

• Note: The mode is available only when the DVR is connected to a permanent power supply through a device that prevents excessive battery discharge – NAVITEL SMART BOX MAX.

Navitel DVR Center app installation

1. Download and install Navitel DVR Center to your cell phone or tablet, follow your mobile device instructions. You can download application by scan QR code in DVR’s Menu (App QR Code) with your cell phone.Choose Wifi in Settings menu, press On.
2.  Turn on a Wi-Fi in your mobile device settings.
3.  Run the app. Choose your DVR in the list. The DVR’s information is in DVR’s Menu (Wi-Fi Navitel).
4.  Connect your mobile device to the DVR through Wi-Fi. To connect to the dashcam, use the password 12345678 or 1234567890. You can change it in DVR’s Menu (Wi-Fi password).
5. Using the Navitel DVR Center you can:
   update DVR’s firmware;
   control DVR functions in Settings menu.

References

• NAVITEL detailed offline maps for iPhone, iPad, Android

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>