Srhythm Soulmate Series (S1) Earbuds Manual
- June 8, 2024
- Srhythm
Table of Contents
True Wireless Stereo Earbuds
Srhythm Soulmate Series (S1)
User Manual
S1 Soulmate True Wireless Stereo Earbuds
What’s in the Box:
Safety Instructions:
Hearing Safety:
- To avoid hearing damage, please do not listen for a long time at high volume.
- Please use cautiously or stop using the earbuds in potentially dangerous situations.
- Do not use the earbuds while driving.
- For your safety, please do not turn the volume too high while running outdoors so as to ensure that you can hear sounds in your surroundings.
Operation Safety:
- Avoid dropping.
- Do not disassemble.
- Keep away from children to avoid danger from improper use.
- Do not submerge in water.
- Do not use outdoors during thunderstorms.
- Avoid operating in extreme temperatures. Please use the earbuds within their operation temperature range: -15°C (5 F) – 55°C (131 F).
- Use original or certified cables for charging.
- Do not use corrosive cleaner/oil to clean the earbuds.
Parameters:
True wireless stereo, Hi-Fi sound quality and dual-mode Bluetooth; both
earbuds have Bluetooth function and can be used alone or in pairs.
Bluetooth Version| Dual-mode Bluetooth v5.0+EDR with ultra-low power
consumption
---|---
Bluetooth Profile| A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
Frequency| 2.4GHZ
Bluetooth Distance| Up to 10 meters without obstacles
Battery Capacity| 35mAh rechargeable li-ion battery for each earbud
300mAh rechargeable li-ion battery for the Charging case
Standby Time| Up to 100 hours for single earbud
Up to 60 hours for both earbuds
Playtime| Single earbud: Up to 5-6 hours
Both earbuds: Up to 4-5 hours
Pair two earbuds:
- Connect the earbuds to each other: Take out two earbuds; after 1–3 seconds, you will hear a sound and the lights will flash blue on both sides when paired.
- Connect the earbuds to your device: Select “S1” on your device and connect. The lights will turn off when connected.
Pair one earbud:
- Take out one earbud; the earbud will turn on automatically and the light will flash red and blue alternately.
- Select “S1” on your device and connect. The light will turn off when connected.
Automatic Pairing:
After the earbuds are paired with your device, they will be automatically
paired next time thanks to the Bluetooth chip in the earbuds. To connect to
other devices, you need to turn off the Bluetooth of the original device or
cancel the connection.
Q&A:
1. Why can’t the earbuds connect to each other successfully?
– Solution: Turn off the Bluetooth of your device and double-click the
right earbud to pair the two earbuds.
2. Why do I only hear the sound on one side, the other side does not flash
or the light flashes red and blue alternately?
– Solution: Turn off the Bluetooth of your device, put the earbuds back in
the charging case, then take out the two earbuds to reset.
Multi-function Touch Button:
| Play/Pause Music: Double Tap on L/R earbud.
---|---
| Play Previous Song: Tap 3 times on left earbud.
| Play Next Song: Tap 3 times on right earbud.
| Activate Siri: Long press on L/R earbud for 2 seconds.
| Answer/Hang up Call: Double Tap on L/R earbud.
| Reject Call: Long press on L/R earbud for 2 seconds.
Indicator Light:
Pairing: Light flashes red and blue alternately
Paired to Each Earbud: Blue light flashes
Paired to Device: Blue light turns off
Charging: Red light turns on
Fully Charged: Blue light turns on
Turn Off Earbuds:
Long press the multi-function touch button for 5 seconds until the red light
turns on, or put the earbuds directly into the charging case. Please note: If
the earbuds are far from the device or the Bluetooth of the device is turned
off, the earbuds will automatically turn off in 5 minutes. You don’t need to
worry that the earbud batteries will run out of power.
Charging Earbuds :
Put the earbuds into the charging case to charge. When charging, the red light
will turn on, and when fully charged, the indicator light will turn blue. The
number on the LED display shows the percentage of power remaining in the
charging case.
The 4 indicator lights from bottom to top represent 25%, 50%, 75% and 100% of
earbud battery power.
After the earbuds have been in the charging case for about 30 seconds, the LED
display will turn off. Please note that the earbuds will turn off while
charging.
Charging the Charging Case:
Plug the provided USB charging cable into the slot on the bottom of the
charging case.
The LED display will show the battery power of the charging case, and the
green signal digit will flash. When fully charged, it will show “100”.
PLEASE NOTE:
Do not handle the earbuds roughly. Do not press them with heavy objects. Keep
them clear of high temperatures, humidity and moisture.
For best performance, keep away from Wi-Fi routers and other high-frequency
transmitting devices.
Please use the earbuds within the effective distance of 10 meters. There
should be no physical obstruction (such as a wall, etc.) between the Bluetooth
device and the earbuds.
The earbuds can be paired with any device that supports Bluetooth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>