Telephone Est MOV9001 Key Finder Anti Loss Tracker Instructions
- June 6, 2024
- Telephone Est
Table of Contents
Telephone Est MOV9001 Key Finder Anti Loss Tracker Instructions
Instructions
Thanks for choosing Bluetooth anti-loss device! This device is a bluetooth 4.0 based product with low power consumption. It is able to find easily lost items like key, handbags, etc and avoid them to lose again by using a free APP on a mobile device, even you can put this device on a child to keep him or her in the safe range you set with Mobile APP or hang it to a pet, which you won’t worry it going lost.
APP Download Method
App name to suit this device is Kindelf
- For iOS user, they can search “Kindelf” from APP Store then download and install it.
- For Android user, they can search “Kindelf” from Google play then download and install it. Users in mainland China can download it from MyAPP or other Mobile APP market.
All screenshots used in user manual are from iPhone X. Allowing system location, microphone and camera all accessible. Android users are subject to practice, phone Bluetooth opened before using.
Use mode
-
Switch on/off
Switch on: press button for 3 seconds then you will hear a “Di” sound for twice and indicator starts to flash all the time. Switch off: press button for 4 seconds then you will hear that “Di” sound for once only and indicator flashing fast to go out. -
Device
Open APP into the “Device” interface as below.
Click “ “, below graphic signs appeared.-
Click “Unconnected”, as graphic sign.
-
Appear “Connecting”, as graphic sign.
-
After connected as graphic sign.
-
Click “Click alarm”, as graphic sign. The device starts to make sound of “DiDi” all the time and will stop “DiDi” when clicking “Stop alarm” again. Double click of bluetooth device button, an alarm ring pre-set up will be happened III Q and it will stop once click of that button again.
-
Click “Setting”, as graphic sign.
-
Click graphic signs to change the device picture as picture.
-
Change the device name as graphic signs.
-
Alarm when Bluetooth Disconnected” default in closed, can be opened by manual, otherwise smart phone won’t alarm when it disconnects with bluetooth anti-lost device, recommend to open as graphic signs.
-
Click on “Select Ringtone” the right side to enter the ringtone interface, select the ringtone type as graphic sign.
-
-
Camera
With camera function, single click on the device to have fun of selfie, and switch between front and rear camera freely.
-
Location
The device will work with positioning function when it gets disconnected with smartphone, which will keep the exact positioning location when disconnecting and is able to find the history of last seen position. Turning on GPS and keep smart phone connected with internet, otherwise map not updated. -
Settings
WIFI Do Not Disturb: Default in closed, but in a Wifi covering area when opened to get connected with a smart phone, the smart phone won’t ring when disconnecting.
Silent Period: Default in opened, set up period from 23:OOPM to 07:OOAM next day, non-interference can be set up closed or reset up the time period. Recording: Get into below interface to use voice recorder, single click on button to start voice recording and click the button again to stop and recorded file will saved in wav format.
- Default in closed, click on the right to open.
- Default in opened, click on the right to close or reset the Silent period.
- Click on the right side to enter the recording interface.
- Software Version.
Enter the recording interface, click the button to start recording, click the button again, stop recording, and automatically generate a recording document.
Product specification
- Supported IOS and Android system: Recommended iOS version 7.0 and above; The Android system needs 4.4 or above, and the phone needs to support the Bluetooth 4.0 standard.
- Support Bluetooth Low Energy (BLE), support two-way alarm.
- Frequency range: 2.402-2.480GHz.
Operating voltage :2.7-3.2V
Operating environment: – 20 -70
Standby current: less than 3uA.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Help
-
Why can’t the anti-lost device connect to smart devices (Mobile phones, tablets, etc)?
- Confirm if the smart device is turning on Bluetooth.
- Determine if the battery has power? If it is a button battery, pull out the battery, then load it, and connect the anti-lost device to the APP again.
- Restart the smart device or restart the app.
-
Why does the device alarm frequently?
Due to the differences in the materials of the products themselves, individual anti-lost devices may have frequent alarms. The following steps can be set to further improve the user experience.- Disconnect, no mobile phone alarm, “Alarm when Bluetooth Disconnected” in the “Setting” option in Device (default in closed), this option does not affect the function of the antilost device to find the phone.
- In the “Settings”, there is “WIFI Do Not Disturb” option to turn on (default in closed), the mobile phone is disconnected from the anti-lost device in this area, and the mobile phone will not sound an alarm.
- There is a “Silent Period” option in “Settings” (Default in opened), the default time period is 23: 00 – 07 : 00, and the time period can be changed according to the user’s habits.
-
The Working distance of the device?
The anti-lost device is a personal communication consumer product, it belongs to the Class 2 standard, and the general distance is less than 10 meters (without any bathers). -
Why is the device alarming frequently at home ?
Due to the poor penetration of the Bluetooth standard to the spacers, if there are more load-bearing walls in the actual living room, the anti-lost device will be frequently alarmed. It is recommended that the user can refer to the help point 2 to optimize the experience. If you are sensitive to this requirement, it is recommended to consider it. Please be cautious to purchase such products. -
How to distinguish the positive and negative of the button battery?
(If the accessory is not a button battery, skip it) See the diagram.
Key points: Some of the information in this manual is based on network information. If there is any dispute or objection to the citation, please refer to the professional information. This description is only for how the APP is used, and does not bear the losses or legal liabilities caused by other misunderstandings.
iOS
Google play
Myapp
Documents / Resources
|
Telephone Est MOV9001 Key Finder Anti Loss
Tracker
[pdf] Instructions
MOV9001, 2ACE5-MOV9001, 2ACE5MOV9001, MOV9001 Key Finder Anti Loss Tracker,
Key Finder Anti Loss Tracker
---|---