NAVITEL RS2 Duo Portable Video Recorder User Manual

User Manual

NAVITEL RS2 DUO
Portable Video Recorder

Introduction

Dear Customer!
Thank you for purchasing this NAVITEL® product.
NAVITEL RS2 DUO is a multifunctional high-definition DVR with many functions and features that are described in this User Manual. Please read the manual carefully before using the device and keep it for future reference.

Device layout

1.  Mount
2. Display
3. LED indicator
4. Micro-USB port
5. Speaker
6. Lens
7. Reset
8. Control buttons
9. Power
10. Microphone
11.  microSD slot
12. Mini-USB port
13. In-cabin camera
14. Infrared light

Specifications

English,
French,
German,
Hungarian,
Italian,
Polish,
Romanian,
Russian,
Slovak,
Spanish,
Ukrainian,
Vietnamese

Note: complete set, appearance, and technical characteristics, which do not change the general functionality of the device, can be changed by the manufacturer without prior notice.

Installation

1. Put the microSD card into the DVR. Use a high-speed SD card (Class10 or above); capacity should be within 8-256 GB.
   • To avoid malfunctions of the DVR and/or SD-card, don’t insert and remove SD- card during DVR operation.
   • Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD card in Menu mode select Format SD-card and confirm it.

2. Secure the device on the windshield with the holder.

3. Connect the car charger to the cigarette lighter socket.

4. Connect the car charger to the DVR (micro-USB).

5. Adjust the camera position.

6. Turn the power on; check whether the device is installed correctly. If the device is installed correctly, the indicator will glow blue.

Precautions

• Use only the original charger adapter. Using another adapter may negatively affect the device’s battery. Use accessories only approved by the manufacturer.
• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).
• Put the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic radiation.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
• Do not disassemble or repair the device by yourself. In case of device failure, contact the service center.

Buttons

In Record mode (REC), press to lock a file (protected file cannot be deleted or overwritten).
In Playback mode, press to select a file, or pause/resume video.
2| In Record mode, press to switch between Record, Capture, and Playback modes.
In Playback mode, press to select a file, or pause/resume video.
In Record mode, press Down to turn the microphone on / off.
3| In Capture mode, press to take a picture.
In Menu, press to select the previous menu item.
In Playback mode, press to rewind.
4| In Record mode, press to start recording; press again to stop recording.
In Menu, press to select the next menu item.
In playback mode, press to fast forward.
Power| Press to turn on the display.
Press to switch the camera view modes: front only; only back; back over the front (picture-in-picture).
Reset| If the device is not responding, press to reset.

Note: The built-in battery is designed only for recording an emergency event in parking mode and turning off the device correctly when the power is turned off; for the full operation of the device in any mode, a constant power connection is required.

Device functions

Format SD-card| Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD card or in case of a data error, please format the microSD card. For formatting the SD card in Menu mode select Format SD-card and confirm it.
---|---
Record| Connect the device to an external power supply and it will start recording automatically (indicated by the flashing blue light). Press the 4 buttons to stop recording. Press 4 again to record another video. Each video will be saved automatically.
Capture| In Record mode (STBY), press the 2 buttons to take a photo (it will be saved automatically).
Playback| In Record mode (STBY), press the 2 buttons twice to enter Playback mode; press the 3 and 4 buttons to select a file; Press the 2 buttons to play a file. During playback, press OK to pause/unpause; press the 3 and 4 buttons to fast forward / rewind.
Loop recording| This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of space, the unprotected files will be overwritten in the order in which they were created.
Record audio| Record video with or without sound.
Lock file| In Record mode (REC), press 1 to protect the current recording. A key symbol will appear at the bottom of the screen.
Protected files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove protection.
Stamp| This function adds a date stamp to the record.
G-sensor| If the vehicle is hit by something, the DVR will automatically lock the current video.
---|---
Parking monitor| In the shutdown state, if the vibration is detected, the device will turn on automatically and start recording. The file will be protected (locked).
Battery| A blue indicator lights up when the device is plugged into an external power supply.
LCD OFF| The device can automatically shut off the screen to reduce power consumption; a time interval can be set in the LCD
OFF menu.
USB-connection| When connecting the device to a PC using a USB cable, three connection options will appear:
1)Mass Storage: play, copy and delete files.
2)Record: standard mode.
3)PC camera mode.

Note: Interior camera of the device is specially optimized for continuous recording at difficult low-light conditions inside the vehicle. We recommend that you keep preset mode “automatic black and white record”. The recording will be performed with an automatic on/off infrared illuminator in black and white mode. If you turn on mode “automatic switching of color recording to black and white”, then when you turn ON/OFF infrared illuminator in transient modes of operation, a slight distortion of some colors is possible, which doesn’t significantly affect the overall perception of the recorded image. IR illumination is required for the correct function of the interior camera and sharply visible recording in the cabin in low light conditions.

STARVIS and are trademarks of Sony Corporation.

References

• NAVITEL detailed offline maps for iPhone, iPad, Android

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>