D-Link DUB-M530 5-In-1 USB-C Hub with HDMI And SD-Microsd Card Reader Installation Guide
- June 9, 2024
- D-Link
Table of Contents
5-IN-1 USB-C HUB WITH HDMI AND SD/MICROSD CARD READER
DUB-M530
QUICK INSTALLATION GUIDE
PACKAGE CONTENTS
5-IN-1 USB-C HUB WITH HDMI AND SD/MICROSD CARD READER DUB-M530
If any of these items are missing or damaged, please contact your reseller.
SYSTEM REQUIREMENTS
- Computer running Microsoft Windows®OS, Mac OS®, or Chrome OS™
- USB Type-C Port with DisplayPort Alternate Mode supported
- A HDMI Cable (HDMI 1.4 is required for 4K resolution)
PRODUCT SETUP
Step 1:
Plug the DUB-M530’s USB Type-C connector into an available USB Type-C port on
your computer.
Step 2:
Connect a HDMI cable to the DUB-M530’s HDMI port.
Step 3:
Attach the other end of the HDMI cable to your HDMI display.
Step 4 (Optional):
Connect up to two USB devices to the USB 3.0 ports. You can also use the dual-
slot card reader to access data on the SD or microSD card simultaneously.
Note: The device may become warm to touch while in use. This is within
normal operating temperature.
TECHNICAL SUPPORT
eu.dlink.com/support
DUB-M530
Ver. 1.00(EU) 2019/10/23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>