YHDC SCT010T Split Core Current Transformer Instruction Manual
- May 15, 2024
- YHDC
Table of Contents
SCT010T
SCT010T Split Core Current Transformer
Ф10mmAperture Split core current transformer
Characteristic
- Safety lock buckle, easy to install
- Built-in over-voltage protection device (TVS tube)
- Crimping terminal output
- Suspended type
Product application
- Portable instrument
- Household metering
- Monitor motor load
Product advantage
- Small volume,light weight
- Low cost
- High turns,high precision
Installation diagram
Primary threading method（Firing line）
- Open the buckle
- Open upward
- Put in lead wire
- Fasten the buckle
Typical technical index：
- Material of core — Ferrite
- Working voltage — Phase voltage≤720V
- Working temperature — 25℃～+60℃
- Storage temperatureb b— 30℃～+90℃
- Frequency range — 50Hz～1KHz
- Dielectric strength — Input（ bare conductor)/output AC 800V/1min 5mA 50Hz
Output/Outer shell AC 3.5KV/1min 5mA 50Hz
Electrical parameters:（ The following parameters are typical values and actual
values will be subject to product testing）
Max. continuous input current: 120% of rated input
Model| Input current| Output| Turns ratio| Load
resistance| Accuracy| Linearity| Weight
---|---|---|---|---|---|---|---
SCT010T| 20A| 20mA| 1：1000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 20A| 5mA| 1：4000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 50A| 50mA| 0.388888889| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 50A| 16.6mA| 1：1000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 60A| 20mA| 1：3000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 80A| 80mA| 1：3000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 80A| 40mA| 1：1000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 80A| 26.6mA| 1：2000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 50A| 0.1A| 1：3000| 10Ω| 0.5%/1%| 1%| 45g
Model| Input current| Output| Turns ratio| Load
resistance| Accuracy| Linearity| Weight
---|---|---|---|---|---|---|---
SCT010T| 10A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 20A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 30A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 50A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 60A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 80A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
- Can be customized parameters/lead length/lead specifications according to user requirements.
Wiring schematic diagram：
Built-in sampling resistance Voltage output type, Secondary doesn’t allow
short circuit TVS：Transient voltage suppressor Current output type, Secondary
doesn’t allow open circuit
Outline size： (in:mm)：
