JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights User Manual
- September 12, 2024
- JMEXSUSS
Table of Contents
JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights
INTRODUCTION
The JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights are a gorgeous accent to any outdoor area, providing 60 LED lights that resemble the beauty of water droplets to create an amazing environment. These solar-powered lights are ideal for all weather circumstances because of their waterproof design, which makes them extremely durable in addition to being environmentally beneficial. These lights, which will be introduced in 2023 by the well-known lighting brand JMEXSUSS, are intended to improve patios, gardens, and other outdoor environments. Easy installation is ensured by the B22D bulb base, and a button or app makes it easier to operate the lights. These string lights, which cost about $29.99, are an affordable way to add flair to your outdoor area while also saving electricity. Their lightweight and manageable 1.72 pounds are a result of their elegant plastic build.
SPECIFICATIONS
| Brand | JMEXSUSS |
|---|---|
| Light Source Type | LED |
| Power Source | Solar Powered |
| Material | Plastic |
| Controller Type | Button |
| Number of Light Sources | 60 |
| Bulb Base | B22D |
| Control Method | App |
| Manufacturer | JMEXSUSS |
| Model Number | 010-WATERDROP-S-WW30-2P |
| Item Weight | 1.72 pounds |
| Package Dimensions | 7.99 x 4.69 x 4.09 inches |
| Special Features | Waterproof |
WHAT’S IN THE BOX
- Water Drop String Lights
- Battery
- Manual
FEATURES
- Solar-powered: Consists of an integrated Ni-MH rechargeable battery that harvests solar radiation and transforms it into electrical energy, obviating the need for periodic battery changes.
- Auto On/Off: The integrated light sensor causes the lights to turn on automatically at nightfall and off automatically at dawn.
- Eight Distinct Modes provides eight different flashing options: Steady-On, Chasing, Twinkle, Fading Slowly, Waves, Combination, and Fireflies.
- Memory Function: You don’t need to reset it every day because the built-in memory chip remembers the mode that was last used.
- Water Drop Design: Contains 30 LED lights arranged in a beautiful teardrop or water drop design.
- Warm White Light: Produces a comfortable, welcoming atmosphere with its warm white radiance.
- Length: The lead wire is 200 cm (6.6 feet) long, and the lighting is 435 cm (14.2 feet) long, for a total length of 635 cm (20.8 feet) for the string lights.
- LED spacing: A uniform spread of light is achieved by placing each LED 15 cm (6 inches) apart.
- IP44 Waterproof: The solar panel and string lights are both rated IP44, which means that they are weather-resistant and appropriate for outdoor use.
- Safe to Touch: Because the lights run on a modest 3V voltage, they are safe to touch and won’t overheat.
- Smart Photosensitive: Once the solar battery is fully charged, lights will turn on by themselves when put in a dark environment.
- Accessories Included: Two 30-LED Water Drop String Lights, two solar panels, and stands for simple setup are included in the package.
- Attractiveness: The water drop pattern gives outdoor décor a quaint and whimsical feel.
- Energy-efficient: Solar power use is both environmentally benign and contributes to lower electricity prices.
- Adaptable Use: Perfect for a range of uses, including patio illumination, garden décor, and celebrations.
SETUP GUIDE
- Unpack the Parts: Take out the stands, solar panels, and string lights from the package.
- Assemble the Solar Panel Stand: Follow the directions to attach the solar panel to the stand or stake.
- Orient the Solar Panel: For best charging, position the solar panel in an area that receives direct sunlight.
- Connect the Lights: Insert the string lights into the connector port on the solar panel.
- Modify the Solar Panel Angle: To get the most exposure, tilt the solar panel in the direction of the sun.
- Set up the String Lights: Lay out the strings of lights along the fence, a pathway, or any other chosen spot.
- Fasten the Lights: If required, use hooks or clips to hold the string lights in place.
- Turn On: Press the solar panel’s On/Off button to turn it on.
- Choose a Mode: To choose between the eight various illumination modes, press the mode button.
- Verify that the lights function as intended by making sure they turn on at nightfall and off at dawn.
- Keep an eye on solar charging to make sure the panel is getting enough sunlight to charge.
- Modify Light Positioning: Make any necessary modifications to the lights’ placement to get the intended effect.
- Check the lights’ ability to illuminate correctly in a dark area by conducting a test in the dark.
- Adjust as Necessary: If the lights or solar panels are not working as they should, move them.
- Secure Every Part: Make sure that every component—including the lights and solar panel—is positioned and linked securely.
CARE & MAINTENANCE
- Regular Cleaning: Use a gentle, wet cloth to wipe dust and dirt from the solar panel and lights.
- Steer Clear of Harsh Chemicals: To prevent damaging the lights or solar panel, steer clear of using harsh cleaning solutions.
- Verify the Position of the Solar Panel: Make sure the panel is still facing a window that lets in enough light to charge it.
- Examine for Damage: Make sure the solar panel and string lights are free of wear and tear on a regular basis.
- Change Batteries: If the lights are not working as they should, you might want to think about changing the solar panel’s rechargeable battery.
- Protect from Severe Weather: Even though the lights have an IP44 rating, it’s advisable to keep them out of locations where severe weather is likely to occur.
- Store Correctly: Keep the lights and solar panel in a cold, dry place when not in use or during off-seasons.
- Adjust Placement: If you observe a decline in performance or visibility, move the lights or solar panel.
- Tight and secure connections should be made between the lights and the solar panel.
- Prevent Overexposure: If at all feasible, shield the solar panel from prolonged exposure to moisture or direct rain.
- Replace Broken LEDs: If a single LED isn’t working, you should think about replacing the damaged lights if it’s feasible.
- Keep Debris Clear: Make sure there are no snow or leaves obstructing the solar panel’s ability to receive sunlight.
- Test Functionality: Make sure the lights are functioning correctly by testing them on a regular basis and adjusting the settings as necessary.
- Correct Installation: To prevent damage, make sure the solar panel and lights are mounted in accordance with the manufacturer’s instructions.
- Look for Firmware Updates: If necessary, see if the lights’ or solar panel’s firmware has been updated or improved in any way to improve functionality.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| Lights not turning on | Low battery charge | Place in direct sunlight for |
charging
Dim lighting output| Insufficient solar exposure| Relocate to a sunlit area
App not connecting| Bluetooth not enabled| Turn on Bluetooth and reconnect
Water inside the light cover| Seal compromised| Dry and reseal the light cover
Lights flicker intermittently| Poor battery connection| Check battery
terminals and clean them
Lights not responding to app| App malfunction| Restart the app and ensure
proper connection
Battery draining too fast| Overuse or weak battery| Replace the battery
Lights not charging in daytime| Obstruction on solar panel| Clean the solar
panel and remove any blockages
Lights work only for a short time| The battery is aged or damaged| Replace the
solar battery
Buttons unresponsive| Water damage| Allow the buttons to dry and test again
LED lights flickering randomly| Loose connection| Check wiring and reconnect
any loose cables
Lights won’t turn off| Faulty sensor| Reset the light settings in the app
App control delayed| Slow network| Ensure strong Wi-Fi or mobile connection
Solar panel not functioning| Solar panel is faulty| Replace the solar panel
Lights turn off during the night| Battery power too low| Charge the battery
fully before using at night
PROS & CONS
PROS:
- Solar-powered, reducing energy costs
- Waterproof design for all-weather use
- App-controlled for convenient operation
- Durable and lightweight material
- Easy installation with B22D bulb base
CONS:
- May require direct sunlight for optimal charging
- Limited color options
- Buttons can be sensitive to water
- App connection may occasionally disconnect
- No remote control feature
WARRANTY
The JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights come with a 12-month warranty covering any manufacturing defects or functional issues. The warranty also includes customer support to assist with troubleshooting or repairs. If the product is found faulty within the warranty period, it will be replaced or repaired free of charge.
FREQUENTLY ASKED QUESTIONS
What type of light source does the JMEXSUSS 010-WATERDROP-S-WW30-2P use?
The JMEXSUSS 010-WATERDROP-S-WW30-2P uses LED light sources, providing bright and efficient illumination.
How is the JMEXSUSS 010-WATERDROP-S-WW30-2P powered?
The JMEXSUSS 010-WATERDROP-S-WW30-2P is powered by solar energy. It includes a solar panel that charges during the day to power the lights at night.
How many light sources are included in the JMEXSUSS 010-WATERDROP-S-WW30-2P string lights?
The JMEXSUSS 010-WATERDROP-S-WW30-2P features 60 LED light sources arranged along the string.
What is the control method for the JMEXSUSS 010-WATERDROP-S-WW30-2P?
The JMEXSUSS 010-WATERDROP-S-WW30-2P can be controlled using a button on the unit or via an app, allowing for convenient operation.
What are the dimensions and weight of the JMEXSUSS 010-WATERDROP-S-WW30-2P package?
The package dimensions are 7.99 x 4.69 x 4.09 inches, and the item weighs 1.72 pounds.
What type of bulb base is used in the JMEXSUSS 010-WATERDROP-S-WW30-2P?
The JMEXSUSS 010-WATERDROP-S-WW30-2P uses a B22D bulb base.
How long does the solar panel need to charge the JMEXSUSS 010-WATERDROP-S-WW30-2P?
The solar panel typically requires about 6-8 hours of direct sunlight to fully charge the JMEXSUSS 010-WATERDROP-S-WW30-2P.
How does the app control the JMEXSUSS 010-WATERDROP-S-WW30-2P?
The app allows users to adjust settings such as brightness, light modes, and timing for the JMEXSUSS 010-WATERDROP-S-WW30-2P.
What kind of atmosphere does the JMEXSUSS 010-WATERDROP-S-WW30-2P create?
The JMEXSUSS 010-WATERDROP-S-WW30-2P creates a warm, ambient glow that mimics the appearance of water drops, enhancing the ambiance of any space.
What is the lifespan of the LED lights in the JMEXSUSS 010-WATERDROP-S-WW30-2P?
LED lights generally have a long lifespan, often exceeding 20,000 hours, making the JMEXSUSS 010-WATERDROP-S-WW30-2P a durable lighting option.
How does the JMEXSUSS 010-WATERDROP-S-WW30-2P compare to other solar-powered string lights?
The JMEXSUSS 010-WATERDROP-S-WW30-2P stands out with its unique water drop design, adjustable brightness, app control, and waterproof construction, offering a distinctive choice among solar-powered string lights.
Why are my JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights not turning on?
Ensure the power source is connected properly. Check if the outlet or batteries are functional, and verify that the plug is securely inserted. Also, confirm that the lights are switched on.
What should I do if only part of my JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights are lighting up?
This could be due to a loose bulb or connection. Inspect the string for any damaged bulbs and replace them if necessary. Ensure that all connections between the string and the power source are secure.
Why are my JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights flickering?
Flickering could be caused by a weak power connection or failing power source. If powered by batteries, try replacing them. For plug-in models, ensure the outlet is providing a consistent current.
How do I fix my JMEXSUSS 010-WATERDROP-S-WW30-2P Water Drop String Lights if they are overheating?
Unplug the lights immediately if they feel too hot to touch. Overheating may be a result of extended use or faulty wiring. Ensure proper ventilation and avoid using the lights for prolonged periods without breaks.