willful N29 Smartwatch for iPhone and Android Blood Oxygen Monitor Fitness Instruction Manual

willful N29 Smartwatch for iPhone and Android Blood Oxygen Monitor Fitness Instruction Manual

A. Bind Your Device

• a. Download and Install the App
  Download the InxFIT App by scanning the QR code or searching in the App Store. Note: the operating system of your mobile phone needs to meet the following requirements:

1. Scan the QR code below to download the InxFIT App.https://web.xiaoju-smart.com/app_install.html

(The QR code may be updated.)

2. Open the App Store on your mobile phone, search for “InxFIT” , and then download the InxFIT App.

• b. Binding Steps
  (Note: during the binding process, InxFIT will ask you to turn on the Bluetooth of your mobile phone and authorize InxFIT to access the GPS of your mobile phone. For IOS user, when a binding error occurs, please ignore this device in the Bluetooth list of your mobile phone first.)

1. On the Home page of the App, click “+” at the upper right corner and select [Add Device] to search for your watch. Find your watch in the Device List and click it to bind it.

2. On the Home page of the App, click “+” at the upper right corner and select [Scan]. Then scan the QR code that is displayed on your watch when it is turned on for the first time. If you accidentally exit the QR code page, select [Device][Setup][About] to find the QR code.

B. Data Synchronization

The watch records various data on your activities when it is worn on your wrist.

You can synchronize data with the App as follows: start the InxFIT App, and pull down the page to start a data synchronization. The synchronization progress is displayed on the page.

Note: please perform a data synchronization at least every 7 days, or the data will be overwritten when the memory is full.

C. Instructions for Use

• a. Charging Diagram
  Follow the diagram below to connect and charge your watch. We recommend that you charge your watch before turning it on for the first time.

• b. Wearing and Adjustment

1. Wear Your Watch
   Leave one-finger gap between the watch and your wrist bone, and adjust the strap to a comfortable length.

2. Replace the Strap Push the push button horizontally to loosen the strap, and then remove the strap. Push button

Note: too loose or too tight wearing may affect the accuracy of HR or SpO2 measurement.

D. Operating Instructions

• a. Button Operations
  Press the button: return to the dial, or switch between the dial and function list. Press and hold the button: turn on/off the device.

• b. Change the Dial
  Press and hold the dial screen to display the dial selection list after vibration. Swipe horizontally to select the desired dial, and then click it to apply it.

• c. Screen Operations
  Swipe the screen to enter different interfaces as shown below.

E. Function Overview

1. Functions
   Sports / HR / SpO2 / Sleep / Alarm Clock / Breathing Exercise / Timer / Weather / Music Control / Stopwatch
   
   Note: the Weather function needs to be enabled on the App. More details on the functions can be found on the App.

2. Initiate an Exercise

• a. To start an exercise: click the “Sports” icon select a sport the exercise data recording will start at the end of the countdown.
• b. Control the exercise: press the side button to pause the exercise recording; press the side button again or click [Resume] on the screen to resume the exercise recording.
• c. Stop the exercise: press and hold the side button to stop the exercise, or click [Stop] on the screen to stop the paused exercise.

F. Specifications

Note: do not wear the device to take a bath, because high temperature or steam may damage the device.

G. Cleaning and Maintenance

It is recommended to wear and clean the product as follows:

1. Keep the product clean.
2. Keep the product dry.
3. Don’t wear the product too tightly.

Do not use detergents to clean the device. You can use soap-free detergents. For stains that are not easy to remove, it is recommended to clean with alcohol.

H. Safety and Certification (see the certificates)

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen XiaoJu Intelligent Technology Co., LTD

Manufacturer’s Name: Huizhou XiaoJu Intelligent Technology Co., Ltd
N29 smart watch
Model number: N29
Operating Temperature: -20° C to 40° C

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mmmust be maintained between the user’s body and the watch, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of S.I. 2017 No. 1206. All essential radio test suites have been carried out. The device complies with RF specifications when the device used at 0mm form your body.

Product Name:N29 smart watch
Model: N29
Input5V 0.17A manufacturer Huizhou XiaoJu Intelligent Technology Co., Ltd
Address6th, 7th and 8th floors, building 1, Zone D, Qiaosheng Industrial Park, Panli village, Lilin Town, Zhongkai high tech Zone, Huizhou
FCC ID:2AZHM-N29

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>