SMARTWITNESS KP2 4G LTE Fleet Telematics Dash Cam User Guide

SMARTWITNESS KP2 4G LTE Fleet Telematics Dash Cam

PACKAGE CONTENTS

OPTIONAL ACCESSORIES

At SmartWitness, we give our Partners multiple options when selecting their preferred power application and camera configuration. The items mentioned below are compatible with the KP2 and offer different benefits or trade-offs when employed with your device. For more details on prices and ordering options, please contact your SmartWitness Account Manager or email us at [email protected].

GET TO KNOW THE KP2

SIDE COVER OPEN

BACK

KEY FUNCTIONS

Automatic Booting
Once you’ve wired your KP2 to the vehicle’s power source, the KP2 will turn on and begin recording after about 30 seconds.

VIDEO RECORDING

Continuous Record
This is the default mode for recording. Your KP2 begins recording after booting up and continues to record the entire time the device is on. In this mode, the SD card storage may fill up quicker and overwrite your oldest recordings when it’s full. You may configure your resolution settings using the KP2 Configuration Tool. Avoid losing data by backing up driver data on separate storage or PC after incidents.

Dual Record, Continuous + Event
Continuous record files will be stored in the “Normal” folder, and event record files will be stored in the “Event” folder on the SD card.

Events
Set audible alerts on the KP2 when specific events trigger (like tailgating). You can choose either a natural language voice or a beep sound. Instant notifications of events can be uploaded to the server simultaneously. Events can also activate a masking mode, where the audio and/or video recording is disabled when the event occurs. For example, geofence events can automatically turn off video/audio recording when the vehicle enters a secure or private area (such as a government facility or home).

Drive Data
DRV data (drive data) will record driving information regardless of events. DRV files consist of GPS, G-sensor, ADAS/DSM and OBD data. DRV files overwrite your device’s oldest data. DRV files upload to the server every 10 minutes by default but can increase to every minute.

G-SENSOR CALIBRATION

1. Install your device, and park the vehicle on a flat surface.
2. Turn on the device.
3. Press the small, red button for 3 seconds.
4. Calibration confirmed with an audible alert.

BLUETOOTH® PANIC BUTTON
Please get in touch with SmartWitness or your supplier to buy a Bluetooth panic button for your KP2.

Enable Pairing
To enable Bluetooth pairing for your panic button, set Bluetooth Panic as “Flic“ in your KP2 Configuration Tool. Your Bluetooth panic button won’t work if you don’t turn this setting on.

How to Pair With the KP2
Red LED = Warning, Blue LED = Record, Green LED = Pairing Confirmation

1. Press BT button.
2. Warning and Record lights will blink, entering pairing mode.
3. Press the Flic BT button, and wait for a second.
4. The Pairing Confirmation light will blink.
5. Warning and Record will change to the previous mode.

SUPERCAPACITOR (EMERGENCY POWER)
When device power is interrupted, your KP2 creates the last recording using a built-in supercapacitor.

ADAS FUNCTIONS

Your KP2’s Automatic Driver Assist System (ADAS) features allow drivers to receive in-cabin preventive audio alerts in cases of potential incidents.

Pedestrian Collision Warning
A pedestrian is in forward proximity of your vehicle, and an imminent collision is possible.

Forward Collision Warning
Your vehicle is likely to collide with something in front of the vehicle.

Headway Monitoring Warning
Your vehicle is not maintaining a safe distance with the vehicle in front of you (tailgating).

Caution
ADAS functionality is not a substitute for an alert, trained and engaged driver. ADAS functionality will be impaired by many things, including but not limited to device malfunction, obstruction of the device’s image sensor, intense weather conditions that reduce the visibility afforded to the device’s image sensor, and poor and/or faded road and lane striping/markings.

DSM FUNCTIONS

Your KP2’s Driver State Monitoring (DSM) functions allow drivers to receive audible alerts for driver distraction, fatigue or negligence. The following DSM events are configurable in your KP2:

DRIVER SAFETY WARNINGS

DISCLAIMER
The KP2 is not a substitute for a safe, conscientious driver. The KP2 cannot compensate for a driver who is distracted, inattentive or impaired by fatigue, drugs or alcohol. Whether or not the KP2 is in use, it is always the driver’s responsibility to take appropriate corrective action. It does not eliminate or decrease the need for a driver to stay alert and obey all traffic laws while operating a vehicle. Never wait for the device to provide a warning before taking measures to avoid an accident. Failure to do so can result in serious personal injury, death or severe property damage. Always, it is the driver’s responsibility to:

• Use safe driving techniques
• Exercise proper judgment
• Maintain a safe speed and distance between vehicles
• Take measures to avoid an accident
• Comply with all applicable laws and regulations

The driver and front passenger must always be correctly seated with seat belts fastened when operating the vehicle to reduce the potential danger of injuries.

OPERATIONAL CONCERNS
In certain conditions, including inclement weather, low visibility and precarious road conditions (including poor lane markings, construction zones, dirt roads, heavy or complicated traffic, and curvy and winding roads), your KP2 may have limited to no functionality. The KP2 may not detect objects such as motorcyclists, bicyclists or pedestrians even in ideal conditions. Always keep the lens and view of your KP2 unobstructed and adequately calibrated to not
inhibit camera functions. Driving in certain conditions or any interference with your KP2 can result in false, few or no warnings. Drivers must continuously monitor traffic and surroundings and take measures to avoid an accident; failure to do so can result in serious personal injury, death or severe property damage. If your KP2 is not functioning correctly, please contact your distributor or our support and have the device inspected immediately. Whether or not the KP2 is operational, it is the driver’s responsibility to maintain vehicle control; failure to do so can result in serious personal injury, death or severe property damage.

CLEANING ADVISORY
Do not apply compressed air or cleaning solutions (e.g., Windex®) to your KP2 while cleaning the device or vehicle cab. Usage of these products may damage the device.

GPS RECEPTION

When satellites don’t have line of sight, cellular towers help triangulate a vehicle’s location.

IMPROVE YOUR SIGNAL

1. Activate your KP2 in an area without large buildings.
2. The optimum operating temperature for your vehicle’s GPS is -10°C~50°C
3. When first using your KP2 or turning it on after a period (>3 days), allow more time to recognize your current location.

RECEPTION MAY BE IMPAIRED:

1. If there is an object at the end of the GPS antenna
2. If your vehicle has metallic elements on the windshields
3. If you install equipment generating electromagnetic waves that interfere with the GPS signal in the vehicle (Ex: Other GPS devices like certain wireless activated alarms, MP3 and CD players and camera alarms use GPS.)
4. If you use a receiver connected by cable. You can avoid electric interference by changing the receiver’s location (antenna).
5. On heavily overcast or cloudy days if the vehicle is:
6. In a covered place such as under a bridge or raised roadway
7. In a tunnel
8. In an underground roadway or a parking area
9. Inside a building or garage
10. Surrounded by high-rise buildings
11. If GPS signal reception is poor. It may take longer to locate your current position when the vehicle is moving than when it’s stationary.

LED & BUZZER SPECIFICATIONS

TECHNICAL SPECIFICATIONS

INSTALLATION RESOURCES

Please follow the links below for access to KP2 installation materials. The Installation Video and Quick Start Guide feature self-installations that require additional power adapter accessories. The Installation Guide is designed for professional 3-wire installation.

WARNING:
SmartWitness installations should be performed by a qualified individual or installation professional only. Working with a vehicle’s power system can be dangerous to both you and your vehicle. This installation is intended only to be a guide since vehicle designs and power/input sources can vary significantly from vehicle to vehicle. If you need to schedule a professional installation service in the USA for your SmartWitness device(s), please visit https://smartwitness.com/scheduleinstall and submit the online form.

CONFIGURATION TOOL & GUIDE

KP2 CONFIGURATION TOOL
The KP2 Configuration Tool allows you to further customize your KP2 device settings. If you wish to make specific calibration changes, please follow this link to download the software. To learn more about each section of the configuration tool, please read the walk-through outlined in the KP2 Configuration Guide.

PC REQUIREMENTS
Recommended settings for optimal configuration tool compatibility:

If your PC doesn’t meet these requirements, the KP2 configuration software may not function properly.

SD VIEWER SOFTWARE & USER GUIDE

SD VIEWER SOFTWARE
SmartWitness’ SD Viewer Software gives you access to enhanced video playback, editing and review. Please follow this link to download the software. To understand the core functions of the software, please adhere to the walk- through outlined in the SD Viewer User Guide.

PC REQUIREMENTS
Recommended settings for optimal SD Viewer Software compatibility:

If your PC doesn’t meet these requirements, the SD Viewer Software may not function properly.

TECHNICAL SUPPORT & WARRANTY

TECHNICAL SUPPORT
For technical support, please contact your local distributor or visit our Support Portal and submit a support ticket. You can also email us at [email protected] or call our support team:

North America, South America, APAC+1 312-981-8774 EMEA +44 (0) 1483 397005

HAAS AND LIMITED WARRANTY
If you are under our Hardware-as-a-Service (HaaS) Warranty, please follow this link to understand the coverage of your subscription. This product is supplied separately with a 2-year limited hardware warranty. The warranty excludes products that have been misused (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.

SAFETY ADVICE & FCC REGULATIONS

FCC Part 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Caution
To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel. Please make sure you follow the safety advice/instructions given in the user guide.

Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Battery for real-time clock (RTC) inside.

Caution
Install the product where it does not block driver’s visibility and where there is no air bag installed. This could cause an accident or might injure passengers in case of accident.

WARNING:
To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.

Caution
Damages due to production malfunction, loss of data or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the shock when the impact is light, and as a result, it may not begin recording automatically.

Caution
Please make sure you follow the safety advice/instructions given in KP2 instruction materials.

References

• Telematics & Data Analytics | Sensata INSIGHTS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>