SMARTWITNESS KP2 EMEA Pro 4G LTE Fleet Telematics Dash Cam User Guide
- June 9, 2024
- SMARTWITNESS
Table of Contents
KP2 EMEA Pro 4G LTE Fleet Telematics Dash Cam
User Guide
KP2 EMEA Pro 4G LTE Fleet Telematics Dash Cam
Standard Kit (w/Optional OBDII Data Adapter Cable)
A. KP2 Camera, Mounting Bracket
and Attached Bracket Power Cable
B. 3M™ Adhesive Tape
C. Alcohol Pads
D. Clips
E. Torx® Wrench
F. Optional: OBDII Data Adapter Cable (Connects to A) – Sold Separately
|
---|---
https://play.google.com/store/apps/details?id=com.smartwitness.kp2installer&hl=en_US&gl=US
| https://apps.apple.com/app/kp2-installer/id1610816200
1. Review the package contents.
2. Scan the QR code inside the box for a detailed installation video, spec
sheet and user guide.| 3. Watch the installation video. Refer to proper
camera installation guidelines here.
4. Use wipe to clean the window. Allow time to dry. To determine compliant
device placement, check local regulations.| 5. Remove backing. Press evenly
to ensure the mounting bracket’s adhesive is flush against the glass. Hold to
window for 30 seconds.
6. Remove adhesive and apply cable clips to windshield. Slide the bracket
power cable into clips.| 7. Tuck cable behind weather stripping, and push
stripping in to secure it.
8. At the end of the bracket cable (A), connect the terminal to the smaller
end of the adapter cable (F).| 9. Plug the end of the OBDII adapter cable
into your vehicle’s OBDII port.
10. Turn on your vehicle. Check that both blue and green lights remain on
after 5 minutes. If not, an error occurred.| 11. Scan the QR code above, and
download the iOS or Android KP2 installation app.
12. Open the KP2 installation app, and scan the IMEI code on the box’s
label.| 13. Follow the device configuration prompts to complete the
installation app.
14. Ensure the IMEI code in the app matches your device’s IMEI. If there
isn’t a match, tap No and contact Smart Witness Support.
If there’s a match, tap Yes to continue.| 15. Read the instructions to
understand more about your vehicle’s “Horizon” and “Hood” lines.
Tap Show Me How for a brief video walk-through of the device attachment
process.
16. Select your KP2 camera configuration. Choose the driver’s side of the
vehicle.
Tap Next to set your vehicle’s “Horizon” and “Hood” lines.| 17. If you adjust
either camera, tap Refresh Images to update road- and driver-facing camera
images.
Use the arrows to adjust your vehicle’s“Horizon” and “Hood” lines.
Ensure your “Hood” line is in the bottom one-fourth of your image.
Scroll down and tap Next to save the “Horizon” and “Hood” lines.
18. Choose preferences for in-cabin alerts, an alert’s volume level or
activation of different ADAS and DSM events.| 19. If you’re unaware of a
setting’s function, tap the info icon to learn more. Pay close attention to
Camera Height. Enter an even interval value (e.g., 190 cm), not an odd
interval value (e.g., 205 cm, 213 cm).
20. After you’ve made changes and activated the appropriate features, tap
Confirm to save your configuration.| 21. On the home screen, you’ll see a
success message validating your saved configuration.
Congratulations!
Your KP2 is now ready to go!
© 2022 Smart Witness. All Rights Reserved.
smartwitness.com
312-981-8774
Documents / Resources
|
SMARTWITNESS KP2 EMEA Pro 4G LTE Fleet Telematics Dash
Cam
[pdf] User Guide
KP2 EMEA Pro 4G LTE Fleet Telematics Dash Cam, KP2 EMEA Pro, 4G LTE Fleet
Telematics Dash Cam, Telematics Dash Cam
---|---