SMARTWITNESS AP1 Video Telematics Camera Installation Guide

June 5, 2024
SMARTWITNESS

SMARTWITNESS AP1 Video Telematics Camera

SMARTWITNESS-AP1-Video-Telematics-Camera-product

QUICK START INSTALLATION GUIDE

FOR AP1 VIDEO TELEMATICS CAMERA

Use the appropriate QR code to download the AP1 Calibration Tool

  1. Review the package contents.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig1

    •  AP1 Camera
    •  Camera Angle Cover
    •  Locking Screw Tool
    •  Alcohol wipe
    •  Clips
    •  Cable
  2.  Scan the QR code inside the box for a detailed installation video, spec sheet and user guide.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig3

  3.  Watch the installation video.

  4.  Scan the QR code above to find and download the app.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig4

  5.  Use included wipe on windshield surface. Allow time to dry.

  6.  Remove backing, then press and hold unit to window for 30 seconds.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig5

  7.  Connect AP1 unit wire to main cable harness.

  8.  Remove adhesive backing on clips, and adhere cable to windshield.

  9.  Tuck cable behind weather stripping, and push stripping in to secure it.

  10.  Plug main cable into your vehicle’s OBDII (or J-BUS) port.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig7

  11.  Hold center button on AP1 camera unit for 5 seconds. Release button, and wait 3 seconds for blinking orange light.

  12.  Select your device’s Wi-Fi settings, choose AP1, and enter the last 8 digits of the IMEI code on the box’s sticker.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig8

  13.  Open the AP1 Calibration Tool, and choose the manual option.

  14.  Tap the Connect to Camera option. If your device is connected through Wi-Fi to the camera properly, you will see “Connection Status: Connected.” When prompted to Download Settings From Camera, tap Yes. If the download was successful, you’ll see the Main Menu.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig9

  15.  Tap the Adjust Settings/Preferences button to open the Settings page.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig11

  16.  Rotate the camera on the AP1 to adjust its angle. If using ADAS, enter vehicle dimensions within the Device/Vehicle settings, as well as your hood and horizon lines in the Camera Angle settings.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig11

  17.  Tap Save Changes.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig12

  18.  Select Upload Settings to Camera from the main page.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig13

  19.  Tighten the camera angle lock screw, and attach the cover.
    SMARTWITNESS-AP1-Video-Telematics-Camera-fig14

Congratulations! Your AP1 is now ready to go!

Documents / Resources

| SMARTWITNESS AP1 Video Telematics Camera [pdf] Installation Guide
AP1, Video Telematics Camera, AP1 Video Telematics Camera
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SMARTWITNESS User Manuals

Related Manuals