Honeywell HHF360 360 Surround Heat Heater Owner’s Manual

: October 28, 2023
: Honeywell

Table of Contents

Honeywell HHF360 360 Surround Heat Heater
IMPORTANT SAFETY INSTRUCTIONS
HHF370 SERIES ONLY
SET-UP
OPERATION
FAHRENHEIT TO CELSIUS
SAFETY FEATURES
CLEANING
TROUBLESHOOTING
PRODUCT SPECIFICATIONS
CONSUMER RELATIONS
3 YEAR LIMITED WARRANTY
FCC COMPLIANCE INFORMATION
Questions? Contact us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Honeywell HHF360 360 Surround Heat Heater

Honeywell-HHF360-360-Surround-Heat-Heater-PRODUCT

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS HEATER

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER. IF YOU DO NOT UNDERSTAND THESE INSTRUCTIONS OR PRODUCT LABELS PLEASE CALL OUR CUSTOMER REPRESENTATIVES AT (800) 477-0457 FOR ASSISTANCE BEFORE USING THIS PRODUCT. Warning Failure to follow any of these safety instructions could result in fire, injury, or death.

YOUR RESPONSIBILITIES

Electrical appliances may expose people to hazards that can cause severe injury as well as death. The use of electrical products may create hazards that include, but are not limited to, injury, fire, electric shock and electrical system damage. These instructions are intended to provide you with the information you need to use the product correctly and to avoid such hazards.

WARNING

Read all instructions before using this heater.
NEVER leave the operating unit unattended.
This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from all sides of the heater.
Extreme caution is necessary when any heater is used by or near children or vulnerable persons and pets.
ALWAYS unplug heater when not in use.
DO NOT operate any heater with a damaged cord or plug, any heater that malfunctions, or any heater that has been dropped or damaged in any manner. Discard.
For residential use only.
DO NOT use outdoors.
This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER locate heater where it may fall into a bathtub or other water container.
DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be a tripping hazard.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
This heater draws 12.5 amps during operation. To prevent overloading a circuit, DO NOT plug the heater into a circuit that already has other appliances working.
It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
To disconnect the heater, first turn off the product, then grip the plug body and pull it from the wall outlet. NEVER pull by the cord.
DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, or where openings may become blocked.
A heater has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
ALWAYS plug heater directly into a wall outlet/receptacle. NEVER use with an extension cord or relocatable power tap (outlet/power strip).
NEVER tamper with this product or attempt to fix it. Any tampering with, or modification of this product can result in serious injury, death, or fire. DO NOT open. Risk of electric shock. There are no user serviceable parts inside.
DO NOT remove product labels that contain warnings or safety instruction.
CAUTION: The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
Before cleaning, or storage, or when not in use, turn the product’s controls to the OFF position and unplug the heater from the electrical outlet and allow to cool.
Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9 m) away from any combustible materials. DO NOT use on an unstable surface such as bedding or deep carpeting. Be sure the heater is not in a position where it may be a tripping hazard.
If your home has aluminum wiring have a licensed electrician check your receptacle’s connections. When using a 1500 watt heater, aluminum wire connections can cause a safety issue.

SAVE THESE INSTRUCTIONS

HHF370 SERIES ONLY

WARNING: Chemical Burn Hazard.

Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. ALWAYS completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. The cells shall be disposed of properly, including keeping them away from children; and even used cells may cause injury.

SET-UP

Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any wall or any combustible material. DO NOT use on an unstable surface such as bedding or deep carpeting. BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE A TRIPPING HAZARD.

MOVING THE HEATER

Turn off the heater.
Allow it to cool for ten minutes.
Unplug heater and move. Heaters are equipped with a Cool Touch Handle for your convenience.

OPERATION

NOTE

The 360° Surround Heat® Heater requires no assembly.
NEVER leave an operating unit unattended.

The 360° Surround Heat® Heater is designed to disperse heat in a 360° range.

Model HHF360 Series – Manual Surround Heat® Heater Operation

With the Power Knob in the OFF position, plug the heater into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

The Power Knob is equipped with two (2) settings, Low and High . The Low setting uses 750 watts of power and the High setting uses 1500 watts of power. You can select the proper setting to accommodate your comfort level with the Power Knob. When you choose any setting the red Power Light will come on. The Low setting does not require as much electricity to operate. It is more energy efficient and may be a better option if you are concerned about saving energy.

Turn the Thermostat Control fully clockwise to the highest setting. When the room reaches a comfortable temperature, slowly turn the Thermostat Control counter-clockwise until the heating element goes off (the red Power Light will not be shut off). This is the point at which the Thermostat setting equals the room temperature. At this setting, the Thermostat will automatically turn the heater on and off to maintain the selected temperature.

Turn the Power Knob to OFF and unplug the heater when you are finished using it.

Model HHF370 Series – Digital 360° Surround Heat® Heater with Remote Operation

Turn heater on by pressing the Power Button on and the heater will start at the HI Heat Level Setting.

To set the Heat Level, press

For Low LO , this setting uses 750 watts of power
For High HI , this setting uses 1500 watts of power

Note: Because the Low LO setting does not require as much electricity to operate, it is more energy efficient and may be a better option if you are concerned about saving energy. To set the thermostat, press the up or down arrows until Desired Temperature is reached. Note: the Desired Temperature will flash three times and then Current Temperature in the room will be displayed.

To constantly run the heater without a thermostat setting, press the button until HI or LO is displayed in Temperature Display. In this mode, make sure to manually shut the heater OFF when done using this appliance. To set the Timer, press the button to select 1, 2, 4, or 8 hour setting. The heater will run for that chosen period in the selected mode, counting down the remaining time in the display bar and automatically shut off after the desired time has passed.

Remote Control

The Digital 360° Surround Heat® Heater can be completely controlled with the remote. One (1) CR2025 3V battery is required (included). To install battery:

Remove the cover located on the back of the remote control.
Insert one CR2025 3V battery positioning it correctly (see instructions in the battery compartment).
Replace the cover.

Remote Control Operation

Locate remote control packed in the top insert.
Press to turn heater on or off.
Press to choose LO (750W) or HI (1500W) Heat Level Setting.
Press to choose 1, 2, 4 or 8 hour setting.
Press the up or down arrows to choose a thermostat setting. The Desired Temperature will flash three times and then Current Temperature in the room will be displayed.
Place remote control in the holder within the handle of the heater when not in use.

FAHRENHEIT TO CELSIUS

Press and hold both Thermostat Control Buttons for three seconds to change between Fahrenheit and Celsius and back.

NOTE: The Remote will not change between Fahrenheit and Celsius – only the controls on the heater.

SAFETY FEATURES

The 360° Surround Heat® Heater is equipped with several devices and features for added protection

A 360° tip-over switch that disables the heater if it is tipped in any direction.
A high temperature safety sensor prevents overheating.
A thermal cut-off fuse will permanently shut down the heater should it operate at a higher than normal temperature. If activated, the unit will need to be replaced.
High temperature plastic and cool to touch housing and handle.
Thermal insulated wiring for heat resistance and reinforced wire connections to help protect against loose connections.

CLEANING

We recommend that the 360° Surround Heat® Heater be cleaned at least once a month and before off-season storage.

Turn the heater OFF or and unplug it. Allow it to cool.
Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION.

STORAGE

Clean your 360° Surround Heat® Heater using the steps from the previous section. Wrap the cord around the unit. Place in its original box and store it in a cool, dry place. This heater does not disassemble.

TROUBLESHOOTING

If your 360° Surround Heat® Heater shuts off unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating.

Be sure it is plugged in and that the electrical outlet is working.
Check your Thermostat Control setting. The unit may simply be off because you have reached your desired heat setting.
Check for any obstructions. If you find an obstruction, turn the heater OFF ( ) or ( ) and unplug it.
Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions.

PRODUCT SPECIFICATIONS

Model: HHF360 Series, HHF370 Series
Unit dims: 7.6” L x 7.6” W x 11.3” H
Amps: 12.5
Unit Voltage: 120V, 60Hz
Max Watts: 1500
Max BTUs: 5118

CONSUMER RELATIONS

We are here to help.

Call us toll-free at: 1-800-477-0457
In US contact us at: www.HoneywellPluggedIn.com/contact-us
Or visit our website at: www.HoneywellPluggedIn.com
In Canada email: ConsumerRelations@HelenofTroy.com
Or visit our website at: www.HoneywellPluggedIn.ca

Please be sure to specify Model number HHF360 or HHF370 Series.

NOTE: if you experience a problem, please contact consumer relations first or see your warranty. Do not return to the original place of purchase. Do not attempt to open the electrical housing yourself, doing so may void your warranty and cause damage to the heater or personal injury.

3 YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product

A. This 3 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship.
C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.

FCC COMPLIANCE INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

Changes or modifications not expressly approved by Helen of Troy could void the user’s authority to operate the equipment.

THIS DEVICE COMPLIES WITH INDUSTRY CANADA’S LICENSE-EXEMPT RSS-210

Operation is subject to the following two conditions

This device may not cause interference.
this device must accept any interference including interference that may cause undesired operation of the device.

Learn more about our safety features, scan with phone camera