WASSERSTEIN 210422 UM Blink Spotlight Kit User Manual
- June 9, 2024
- WASSERSTEIN
Table of Contents
WASSERSTEIN 210422 UM Blink Spotlight Kit User Manual
In the Box
-
1 x spotlight
-
1 x rubber casing
-
1 x USB power cable
-
1 x split USB adapter cable
How to Install
Note: Fully charge the spotlight before using.
-
Make sure the labels on the back of the spotlight are right-side-up, and slide the spotlight into the top of the rubber casing.
-
Make sure the Blink logo on the front and labels on the back of the Blink Cam are right-side-up, and slide the Blink Cam into the bottom of the rubber casing.
-
Plug the split USB adapter cable into both the spotlight and Blink Cam USB ports.
-
Plug the USB cable into the split USB adapter cable.
-
To turn on/off, flip the switch on the left side. Flip left for ON, right for AUTO.
-
To adjust the timer, flip the switch on the right side: 30 seconds, 1 minute, or 5 minutes.
Specifications
- Lumens: 100 lumens
- Angle: 120 degrees
- Power supply: 5V 1A
- Dimension: 1 x 2.2 x 1.4 in
- Connection: micro USB
- Operating current: 130 -150mA
- Motion sensing distance: 6.6 -16.4 ft
- Standbycurrent: 2mA
- Battery life: 2-3 days
- Number of LEDs: 8
- Light temperature: 4000K
- Operating conditions: -4 °F to 131 °F (-20 °C to 55 °C)
Get More Support
Scan the QR code below or email us at contact@wasserstein-
home.com.
CONTACT US
Blink Outdoor Camera is not included.
Blink Indoor Camera is not included.
Wasserstein is a trademark of Dropcases Ltd.
Wasserstein is not affiliated with
Immedia Semiconductor, LLC.
Blink is the trademark of Immedia Semiconductor, LLC.