ofinto Ergonomic Chair Active 3D Office Chair User Manual

ofinto Ergonomic Chair Active 3D Office Chair

Product Information

The Ergonomic Chair Active 3D is designed to provide optimal conditions for active, dynamic sitting and healthy working. It combines ergonomics with comfort, allowing for a healthy posture while sitting. The chair is intended to be assembled, configured, and customized correctly to fulfill all ergonomic aspects.

Product Specifications:

• Product Weight: Approximately 18 kg
• Maximum Load: 130 kg
• Minimum Seat Height: 100 cm
• Maximum Seat Height: 110 cm
• Minimum Seat Width: 44 cm
• Maximum Seat Width: 54 cm
• Minimum Seat Depth: 46 cm
• Maximum Seat Depth: 51 cm
• Seat Dimensions: 46 cm x 56 cm (W x H)

Product Usage Instructions

Assembly:
Refer to the provided videos or assembly instructions for assistance with the assembly process.
Follow the steps below:

• Step 1: Assemble components A, B, C, and D.
• Step 2: Attach component D to the assembled parts from Step 1. Attach component E as well.
• Step 3: Attach components G, H, and I.
• Step 4: Refer to the provided videos or assembly instructions for further assistance.
• Step 5: Attach components J and K.

Operation:
Refer to the provided videos for assistance with operating the chair.

• Seat Depth: Adjust the seat depth according to your preference and comfort.
• Resistance: Adjust the resistance of the chair to suit your desired level of movement.
• Armrests: Adjust the armrests to ensure proper shoulder movement and freedom.
• Proper Adjustment: Configure the chair to ensure a comfortable and ergonomic sitting position.

Cleaning and Maintenance:
Cleaning: Remove dust and dirt from the chair using a soft cloth. For stains on the upholstery, consult a professional cleaning service.

Maintenance: Occasionally clean the castors to remove dust and debris. Check and tighten any loose screws or fasteners to ensure safety and prevent injuries. Before reusing the swivel chair, make sure it is in proper working condition.

Storage and Disposal:
Storage: Store the chair in a safe and dry place when not in use.
Disposal: Follow local regulations and guidelines for proper disposal of the chair.

We value your feedback! Please rate the Ergonomic Chair Active online at www.ofinto.ch and contact our online customer service for any questions, comments, or suggestions for improvement.

THANK YOU!
Thank you for choosing the ofinto ergonomic chair Active! It provides you with the optimal conditions for active, dynamic sitting and healthy working. The ergonomic chair Active combines ergonomics with comfort and enables a healthy posture while sitting. However, only if your chair is correctly assembled, configured and customized can it fulfill all ergonomic aspects. This User Manual is intended to help you with these settings.
Your feedback is important to us! Please leave us your rating for the ofinto ergonomic chair Active online at www.ofinto.ch. If you have any questions, comments or suggestions for improvement, please contact us at any time via our online customer service.
And now, enjoy sitting!

WARNING!
Please read the instructions and safety precautions carefully before using the office chair. Keep the assembly instructions for further use. If you pass on the swivel chair to a third party, make sure to include these assembly instructions.
ofinto ag assumes no liability for damage caused by the improper use of the office chair.

DELIVERY CONTENTS

COMPONENTS & TOOLS

• A. Mechanism
• B. Gas spring
• C. Footbase
• D. Castors
• E. Backrest
• F. Seat
• G. Washers 8*2mm
• H. Nuts M6
• I. Screws M8*12mm
• J. Split lock washers 8*2mm
• K. Screws M8*14mm
• L. Tube spanner 13mm
• M. Hex key 5mm

ASSEMBLY

• Step 1
  Press castors firmly into the footbase!

• Step 2
  

• Step 3

• Step 4
  

• Step 5
  Use light pressure to bring the elastic connectors into the appropriate position to apply the screws.
  Make sure that you tighten the two screws evenly.

CONTROLS

CORRECT SETUP

You can adjust the swivel chair in seat height, seat depth and backrest inclination. This enables you to achieve an ergonomic sitting position. An upright sitting posture strengthens your spine. Make sure that you place your legs at an angle of slightly more than 90° and your feet completely on the floor. The seat height is correctly adjusted when your knee is slightly lower than your hip.
The length of your legs determines the seat depth. It is correctly adjusted when there is a distance of about three fingers between the edge of the seat and the calf when the pelvis is in very good contact with the backrest.
Adjust your armrests so that both shoulders are horizontal in a relaxed position while your forearms rest on the arm-rests. The arm angle should be at least 90°.
The width of the armrests depends on the width of your shoulders. When adjusted correctly, your arms are close to your torso while resting on the armrests. However, your freedom of movement must not be restricted.
Adjust the position of the lumbar support so that the curvature is at the level of the lumbar vertebrae, i.e., approximately on the waistline. The lumbar support helps to relieve the strain on your spine during long periods of sitting and supports your lower back in its natural shape. In general, it is healthier to move while sitting, i.e. to
set the backrest of your chair to move. This additional movement can help to prevent negative effects from sitting permanently. When adjusting the resistance, make sure that contact with the backrest is always maintained. At the ideal resistance setting, the backrest holds your back evenly when leaning back and provides comfortable support with a light pressure on the way forward.
Your chair supports 360° dynamic sitting. Dynamic sitting means that you change your sitting position or sitting posture as often as possible. This prevents incorrect postures, tension and back pain and helps to strengthen the back muscles. When you activate the dynamic sitting function of the ofinto Active, the chair moves not only forward or backward, but also sideways, automatically leading to a constant change of your sitting position. In this way, you are constantly in motion even when you are sitting permanently, which leads to a greater sense of well-being and higher performance.

PRODUCT SPECIFICATIONS

WEIGHT & DIMENSIONS

• Product weight: approx. 18 kg
• Max. load: 130 kg
• Chair height: min. 100 cm max. 110 cm
• Seat height: min. 44 cm max. 54 cm
• Seat depth: min. 46 cm max. 51 cm
• Backrest: 46 cm x 56 cm (W x H)

SPECIFICATIONS

• Soft castors for hard floors (see next page)
• 3D mechanism
• 4 tilt lock positions with anti-shock lock
• 4-stage resistance setting
• Seat slide function with 5 cm adjustment
• Adjustable lumbar support
• Class 4 gas spring with a stroke of approx. 10 cm (TÜV LGA tested according to DIN EN 16955:2017)
• Durability certified according to ANSI/BIFMA X5.1-2017 safety standard (Type I, III)
• Ergonomics certified by IGR Institute for Health and Ergonomics according to DIN EN ISO 26800 / EN ISO 15537

SAFETY INSTRUCTIONS AND  HAZARD WARNINGS

Only trained technicians may work on or replace gas springs for adjusting the seat height. They may never be replaced or repaired independently by the user. In case of independent repairs, liability and warranty claims expire. In addition, personal injury and damage to pro-perty may occur. ofinto ag does not accept any liability for damage caused by improper or incorrect use.
The office swivel chair is designed exclusively as a sea-ting option for individual persons with a maximum weight load of 130 kg. It must never be used as a substitute for a ladder, as a stand, as a gymnastics apparatus for children or similar.
Proceed carefully during installation and follow these installation instructions. Improper assembly, as well as failure to comply with or disregard the instructions and warnings regarding the use of this product may result in damage to property and/or injury.
Place the swivel chair indoors only and always place it on a level and dry floor. Plastic and metal react to stress and temperature influences by expanding and contracting. Check all screw connections regularly and tighten them if necessary. Loose screw connections can lead to personal injury. Do not use the swivel chair if screw connections have become loose or if the metal or plastic parts are deformed, cracked or otherwise damaged. The chair is equipped with high-quality polyutherane castors. These are suitable for hard as well as soft floors. For particularly delicate floors we recommend the use of a floor
protection mat. ofinto is not liable for any damage to the floor.
Do not have the swivel chair dismantled by non-instructed persons. This can lead to injury or damage.
Do not expose the swivel chair to weather conditions, e.g. rain. Protect the office chair from direct sunlight, otherwise the color of the textiles may change. Also remember that zippers, sharp-edged buttons or rivets on garments may cause damage to the cover.
Individual parts such as armrests or castors may only be replaced independently after consultation with the ofinto customer service.

CARE INSTRUCTIONS

CLEANING
A vacuum cleaner can be used to remove dust and lint from the cover. Use a damp soft cloth and a mild, neutral detergent to treat stains on the cover and the surface. For stubborn stains please consult a specialist.
Use a dry cloth to remove dust and dirt from the under-side of the seat, the back of the backrest and the base. Use a glass cleaner to treat stains on the polished aluminium. Polish dry after cleaning.
Do not use aggressive cleaning agents, hard brushes, sharp or metallic cleaning objects such as knives, metal sponges and the like. These can damage the surfaces. Never clean the gas pressure spring.

MAINTENANCE

Occasionally remove dust and carpet fluff from the castors to ensure that the castors can move.
Regularly check all screw connections for tightness and tighten them if necessary. Loose screw connections impair safety and there is a risk of injury.
Before using or storing the swivel chair again, wait until all parts are completely dry or dry them with a dry cloth.

STORING AND DISPOSAL

STORING
All parts must be completely dry before storing.
Always store the office chair in a dry place, protected from dust and inaccessible to children.

DISPOSAL

Keep packaging materials away from children and recycle them in the interest of environmental protection. Add cardboard and paperboard to the waste paper, foils to the recyclable material collection.
When the chair is no longer of use, contact your local waste disposal service for information on environmentally friendly disposal. By disposing of the chair separately, you can help reduce waste and reduce potential negative impact on human health and the environment.

Bischofszellerstrasse 53
CH-9200 Gossau SG
info@ofinto.ch | www.ofinto.ch
Copyright 2022 ofinto ag

References

• Beste ergonomische Büromöbel online kaufen | 30 Tage testen | ofinto ®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>