ofinto Ergonomischer Stuhl Active Chair User Manual
- June 13, 2024
- ofinto
Table of Contents
ofinto Ergonomischer Stuhl Active Chair
Product Information
- ProductName: Ergonomischer Stuhl Active
- UserManual: Download User Manual
- ProductWeight: Approx. 18 kg
- Max. Load Capacity : 130 kg
- Seat Depth: Min. 46 cm, Max. 51 cm
- Seat Dimensions: 46 cm x 56 cm (Width x Height)
- Specifications: Arretierung und Ergonomie nach DIN EN ISO 26800 / EN ISO 15537
Product Usage Instructions
- Make sure to read the instructions and safety precautions carefully before using the office chair.
- Keep the assembly instructions for further use.
- If you pass on the swivel chair to a third party, make sure to include these assembly instructions.
- Assembly:
- Refer to the provided videos or the assembly help document for assistance with the assembly process.
- Step 1: Attach components A, B, C, D, E, F, G, H, and I as shown in the assembly diagram.
- Step 2: Press the castors firmly into the footbase.
- Controls:
- Refer to the provided videos on seat depth adjustment, seat height adjustment, and block function for assistance with chair controls.
- Proper Adjustment:
- The width of the armrests should be adjusted according to the width of your shoulders for proper alignment.
- Cleaning and Maintenance:
- Cleaning: Remove dust and stains from the upholstery using suitable cleaning products. For stubborn stains, consult a professional.
- Maintenance: Occasionally clean the castors from dust and debris. Check for loose screws and tighten them if necessary for safety.
- Storage and Disposal:
- Storage: Store the chair in a safe and dry place.
- Disposal: Follow local regulations for the proper disposal of the chair.
THANK YOU!
Thank you for choosing the ofinto ergonomic chair Active! It provides you with
the optimal conditions for active, dynamic sitting and healthy working. The
ergonomic chair Active combines ergonomics with comfort and enables a healthy
posture while sitting. However, only if your chair is correctly assembled,
configured and customized can it fulfill all ergonomic aspects. This User
Manual is intended to help you with these settings.
Your feedback is important to us! Please leave us your rating for the ofinto
ergonomic chair Active online at www.ofinto.ch. If you have any questions,
comments or suggestions for improvement, please contact us at any time via our
online customer service.
And now, enjoy sitting!
WARNING!
Please read the instructions and safety precautions carefully before using the
office chair. Keep the assembly instructions for further use. If you pass on
the swivel chair to a third party, make sure to include these assembly
instructions.
ofinto ag assumes no liability for damage caused by the improper use of the
office chair.
DELIVERY CONTENTS
COMPONENTS & TOOLS
- A. Seat & Mechanism
- B. Backrest
- C. Gas spring
- D. Footbase
- E Castors
- F. Screws M8*25mm
- G. Split lock washers 8*2mm
- H. Washers 8*2mm
- I. Hex key 5mm
ASSEMBLY
Press castors firmly into the footbase!
CONTROLS
CORRECT SETUP
You can adjust the swivel chair in its seat height, seat depth, backrest tilt,
and with the optional tilt function, in its seat inclination. This enables you
to achieve an ergono-mic sitting position. An upright sitting posture
strengthens your spine. Make sure that you place your legs at an angle of
slightly more than 90° and your feet completely on the floor. The seat height
is correctly adjusted when your knee is slightly lower than your hip.
The length of your legs determines the seat depth. It is correctly adjusted
when there is a distance of about three fingers between the edge of the seat
and the calf when the pelvis is in very good contact with the backrest.
Adjust your armrests so that both shoulders are horizontal in a relaxed
position while your forearms rest on the arm-rests. The arm angle should be at
least 90°.
The width of the armrests depends on the width of your shoulders. When
adjusted correctly, your arms are close to your torso while resting on the
armrests. However, your freedom of movement must not be restricted.
Adjust the position of the lumbar support so that the curvature is at the
level of the lumbar vertebrae, i.e., approximately on the waistline. The
lumbar support helps to relieve the strain on your spine during long periods
of sitting and supports your lower back in its natural shape. In general, it
is healthier to move while sitting, i.e. to
set the backrest of your chair to move. This additional movement can help to
prevent negative effects from sitting permanently. When adjusting the
resistance, make sure that contact with the backrest is always maintained. At
the ideal resistance setting, the backrest holds your back evenly when leaning
back and provides comfortable support with a light pressure on the way
forward.
If you have the version with an optional seat tilt function, you can adjust
the seat angle. The forward tilt allows for an upright posture and enhances
concentration, while the backward tilt relieves the back and allows for a more
relaxed sitting position. Use the seat tilt function to find your individual
comfort zone and make frequent adjustments.
PRODUCT SPECIFICATIONS
WEIGHT & DIMENSIONS
- Product weight : approx. 18 kg
- Max. load: 130 kg
- Chair height: min. 100 cm max. 110 cm
- Seat height: min. 44 cm max. 54 cm
- Seat depth: min. 46 cm max. 51 cm
- Backrest: 46 cm x 56 cm (W x H)
SPECIFICATIONS
- Soft castors for hard floors (see next page)
- 4 tilt lock positions with anti-shock lock
- 4-stage resistance setting
- Optional seat tilt function
- Seat slide function with 5 cm adjustment
- Adjustable lumbar support
- Class 4 gas spring with a stroke of approx. 10 cm (TÜV LGA tested according to DIN EN 16955:2017)
- Durability certified according to ANSI/BIFMA X5.1-2017 safety standard (Type I, III)
- Ergonomics certified by IGR Institute for Health and Ergonomics according to DIN EN ISO 26800 / EN ISO 15537
SAFETY INSTRUCTIONS AND HAZARD WARNINGS
- Only trained technicians may work on or replace gas springs for adjusting the seat height. They may never be replaced or repaired independently by the user. In case of independent repairs, liability and warranty claims expire. In addition, personal injury and damage to property may occur. ofinto ag does not accept any liability for damage caused by improper or incorrect use.
- The office swivel chair is designed exclusively as a seating option for individual persons with a maximum weight load of 130 kg. It must never be used as a substitute for a ladder, as a stand, as a gymnastics apparatus for children or similar.
- Proceed carefully during installation and follow these installation instructions. Improper assembly, as well as failure to comply with or disregard the instructions and warnings regarding the use of this product may result in damage to property and/or injury.
- Place the swivel chair indoors only and always place it on a level and dry floor. Plastic and metal react to stress and temperature influences by expanding and contracting. Check all screw connections regularly and tighten them if necessary. Loose screw connections can lead to personal injury. Do not use the swivel chair if screw connections have become loose or if the metal or plastic parts are deformed, cracked or otherwise damaged. The chair is equipped with high-quality polyutherane castors. These are suitable for hard as well as soft floors. For particularly delicate floors we recommend the use of a floor protection mat. ofinto is not liable for any damage to the floor.
- Do not have the swivel chair dismantled by non-instructed persons. This can lead to injury or damage.
- Do not expose the swivel chair to weather conditions, e.g. rain. Protect the office chair from direct sunlight, otherwise the color of the textiles may change. Also remember that zippers, sharp-edged buttons or rivets on garments may cause damage to the cover.
- Individual parts such as armrests or castors may only be replaced independently after consultation with the ofinto customer service.
CARE INSTRUCTIONS
CLEANING
A vacuum cleaner can be used to remove dust and lint from the cover. Use a
damp soft cloth and a mild, neutral detergent to treat stains on the cover and
the surface. For stubborn stains please consult a specialist.
Use a dry cloth to remove dust and dirt from the under-side of the seat, the
back of the backrest and the base. Use a glass cleaner to treat stains on the
polished aluminum. Polish dry after cleaning.
Do not use aggressive cleaning agents, hard brushes, sharp or metallic
cleaning objects such as knives, metal sponges and the like. These can damage
the surfaces.
Never clean the gas pressure spring.
MAINTENANCE
Occasionally remove dust and carpet fluff from the castors to ensure that the
castors can move.
Regularly check all screw connections for tightness and tighten them if
necessary. Loose screw connections impair safety and there is a risk of
injury.
Before using or storing the swivel chair again, wait until all parts are
completely dry or dry them with a dry cloth.
STORING AND DISPOSAL
STORING
All parts must be completely dry before storing.
Always store the office chair in a dry place, protected from dust and
inaccessible to children.
DISPOSAL
Keep packaging materials away from children and recycle them in the interest
of environmental protection. Add cardboard and paperboard to the waste paper,
foils to the recyclable material collection.
When the chair is no longer of use, contact your local waste disposal service
for information on environmentally friendly disposal. By disposing of the
chair separately, you can help reduce waste and reduce potential negative
impact on human health and the environment.
Bischofszellerstrasse 53
CH-9200 Gossau SG
info@ofinto.ch |
www.ofinto.ch
Copyright 2023 ofinto ag