WASSERSTEIN Wyze Cam Outdoor Solar Panel User Manual
- June 9, 2024
- WASSERSTEIN
Table of Contents
Thoughtful Products for your Smart Home
Solar Panel for Wyze
Cam Outdoor
USER MANUAL
In the Box
Important Note
- Make sure that your Wyze Cam Outdoor is fully charged before you connect it to the solar panel.
- Please place you solar panel at the position with best direct sunshine.
Warning
- Do not open or dismantle the solar panel for any reason.
- Keep the solar panel away from any heat source like a furnace, heater, or barbeque grill.
- Make sure that the outdoor charging cable is properly attached to your camera.
- Avoid bending, stretching, or cutting the charging cable.
Installing Solar Panel
-
Mark the holes using the bracket for guidance.
-
Drill the holes.
-
Insert the anchors and screw the mount to the wall.
-
Slide the solar panel onto the mounting piece.
Adjusting your Solar Panel
The 360-degrees rotatable mounting bracket allows you to adjust the Solar
Panel in the best position to absorb sunlight.
Connect the
Solar Panel to your Wyze Cam Outdoor
- Open the rubber cap at the back of your camera, and plug the cable firmly into the port.
- Place the solar panel under direct sunlight to continuously charge to your camera.
Specifications
| Dimension: | 7.5 x 4.37 x 0.79 in |
|---|---|
| Power: | 2 W |
| Voltage: | 5 V DC |
| Outdoor Cable length: | 13.5 ft |
| Materials: | ABS |
Get More Support
Scan the QR code below or email us at contact@wasserstein-
home.com.
Wyze Cam Outdoor is not included.
Wyze Cam Outdoor is a trademark of Wyze Labs, Inc.
Wasserstein is not affiliated with Wyze Labs, Inc.
Wasserstein is a trademark of Dropcases Ltd.
www.wasserstein-home.com
Made in China
Documents / Resources
|
WASSERSTEIN Wyze Cam Outdoor Solar
Panel
[pdf] User Manual
Wyze Cam Outdoor Solar Panel, Wyze, Cam Outdoor Solar Panel, Outdoor Solar
Panel
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>