Blomberg KNE4564EVI Full-integrated Frost Free Combi Fridge Freezer Instruction Manual

Full-integrated
Frost Free Combi Fridge Freezer
Operating instructions
KNE4564EVI

Please read these instructions first before using your appliance
Thank you for choosing a Blomberg appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions. Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use. Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future reference. This user manual may also be applicable for several other models. Differences between models will be listed. If you have any questions or concerns, please call our contact center or find help and information online at www.blomberguk.com.

Explanation of symbols used throughout this User Manual

|  The terminal in the plug is marked with the symbol.
---|---
|  The freezer compartment is marked with the symbol.
| Important information or useful usage tips.
| Warning against dangerous conditions for life and property.
|  Warning against electric voltage.
|  The symbol for waste electrical and electronic equipment.

WARNING!
In order to ensure a normal operation of your refrigerating appliance, which uses a completely environmentally friendly refrigerant the R600a (flammable only under certain conditions) you must observe the following rules

• Do not hinder the free circulation of the air around the appliance.
• Do not use mechanical devices in order to accelerate the defrosting, other than the ones recommended by the manufacturer.
• Do not destroy the refrigerating circuit.
• Do not use electrical appliances inside the food-keeping compartment, other than those that might have been recommended by the manufacturer.

Information

The model’s technical information can be retrieved by scanning the QR code on the Energy label and proceeding to the website entering the model identifier.

|
---|---
http://Model description in EU registration database| http://Model description in EU registration database

CONTENTS

| This product is equipped with a lighting source of the “G” energy class. The lighting source in this product shall only be replaced by professional repairers.
---|---

Your refrigerator

Congratulations on your choice of a Blomberg quality Appliance which has been designed to give you service for many years.

****Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

Warnings

• DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.

• Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally.

• If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, and ensure that it is left in a safe condition to prevent the entrapment
  of young children.

• This fridge/freezer must only be used for its intended purpose i.e. the storing and freezing of edible foodstuff.

• Do not dispose of the appliance on a fire. At Blomberg, the care and protection of our environment is an ongoing commitment. This appliance which is among the latest range introduced is particularly environmentally friendly. Your appliance contains non-CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit/pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.

• We suggest you contact your local authority for disposal of information and facilities available.

• See Installation Instructions on page 8 for information on a suitable location.

• To obtain the best possible performance and trouble-free operation from your appliance it is very important to carefully read these instructions.

• On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition. Ensure that the plug remains readily accessible. Do not use multiple adapters or extension cables.

• Failure to observe these instructions may invalidate your right to free service during the guarantee period.

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. We suggest you keep these instructions in a safe place for easy reference.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless
  they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

Electrical Requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency is shown on the rating plate inside the appliance correspond to your electricity supply. The rating label is on the left-hand side of the fridge inner liner. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.
WARNING: When positioning the appliance ensure the supply cord is not trapped or damaged. Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Blomberg Authorised Service Agent.

Warning! This Appliance Must Be Earthed

If the fitted molded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The molded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB- approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. The Colour of the replacement fuse cover must be the same color as that visible on the pin face of the plug. Fuse
covers are available from any good electrical store.

Important! Fitting A Different Plug

As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug proceed as follows (see diagram):

1. Connect the green-yellow or green (Earth) wire to the terminal in the plug marked ‘E’ or with the symbol or colored green and yellow or green.
2.  Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or colored black.
3. Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or colored red.
4. With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Energy Saving Tips

1.  Ensure your appliance is installed in a well-ventilated area.
2. Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at a minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry frozen food.
3. Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.
4. Defrost frozen food in the fridge, so that frozen food acts as an ice pack to assist in cooling in the fridge.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high-quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our national Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

TRANSPORTATION

INSTRUCTIONS

1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2. If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right-hand side when standing in front of the appliance. After bringing it to an upright position, it must not be operated for at least 4 hours to allow the system to settle.

3. Failure to comply with the above instructions could result in damage occurring to the appliance. The manufacturer will not be held responsible if these instructions are
   disregarded.

4. The appliance must be protected against rain, moisture, and other atmospheric influences.

5. When positioning your appliance take care not to damage your flooring, pipes, wall coverings, etc. Do not move the appliance by pulling by the door or handle.

6. Empty any water in the drain tray before moving. See sections ‘Defrosting’ and “Maintenance and cleaning” for further information.

7. Make sure that the defrosted water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.

Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed.

Points to be considered when re-transporting your refrigerator

1. Your refrigerator must be emptied and cleaned prior to any transportation.
2. Shelves, accessories, crisper and etc. in your refrigerator must be fastened securely by adhesive tape against any jolt before repackaging.
3. Packaging must be adequate, and the rules of transportation printed on the package must be followed.
   Please do not forget…
   Every recycled material is an indispensable source for nature and for our national resources. If you wish to contribute to recycling the packaging materials, you can get further information from the environmental bodies or local authorities.

Before operating your refrigerator

Before starting to use your refrigerator check the following:

1. Is the interior of the refrigerator dry and can the air circulate freely in the rear of it?
2. Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
3. Plug the refrigerator into the wall outlet. When the fridge door is open, the fridge compartment interior light will come on.
4. You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
5. The front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Electric connection

Connect your product to a grounded socket that is being protected by a fuse with the appropriate capacity.
Important:

• The connection must be in compliance with national regulations.

• The power cable plug must be easily accessible after installation.

• The specified voltage must be equal to your mains voltage.
  WARNING : Do not locate the extension sockets or charging transformers/power supplies or Lithium-Iron battery operated products adjacent to the compressor as they could overheat.

• Extension cables and multi-way plugs must not be used for the connection.

the damaged power cable must be replaced by a qualified electrician.
The product must not be operated before it is repaired! There is a danger of electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not dispose of them along with the normal household waste. The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old refrigerator without giving any harm to the environment.
You may consult your authorized dealer or waste collection center of your municipality about the disposal of your refrigerator. Before disposing of your refrigerator, cut off the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

Placing and Installation

If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, then carefully remove the doors of your
refrigerator and pass it sideways through the door.

1. Install your refrigerator to a place that allows ease of use.

2. Keep your refrigerator away from heat sources, humid places, and direct sunlight.

3. There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there
   must be at least 5 cm distance from the ceiling and at least 5 cm from the wall. If the floor is covered with a carpet, your product must be elevated 2.5 cm from the floor.

4. Place your refrigerator on an even floor surface to prevent jolts.

5.  Do not keep your refrigerator in ambient temperatures under 10°C.

IMPORTANT : Care must be taken while cleaning/carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands. Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.
IMPORTANT : Make sure that the main cable is not caught under the appliance during and after carrying/moving the appliance, to avoid the main cable becoming cut or
damaged. Do not allow children to play with the appliance or tamper with the controls. Blomberg declines to accept any liability should the instructions not be followed.

Installation Instructions

1. The space in the room where the appliance is installed must not be smaller than 10 cubic meters.

2. See Installation-Diagram for detailed Installation Instructions.

3. This appliance has been designed to operate in ambient temperatures up to 38 degrees C (100 degrees F) and is equipped with Freezer Guard technology which ensures that even if the ambient temperature falls to -15°C, frozen food in the freezer does not thaw thanks to this. So, you may then install your appliance in a garage or an unheated room without having to worry about frozen food in the freezer being spoilt. However at the low ambient temperatures mentioned above, fridge contents are
   likely to freeze, so check and consume food in the fridge accordingly. When the ambient temperature returns to normal, you may change the knob setting to suit your needs. If the ambient temperature is below 0°C, the food in the fridge compartment will freeze. So, we recommend you don’t use the fridge compartment in such
   low ambient conditions. You can continue using the freezer compartment as usual.

4. Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances:
   From Cookers 50 mm (2”)
   From Radiators 300 mm (12”)
   From Freezers 25 mm (1”)

5. Refer to the “Maintenance and cleaning” section to prepare your appliance for use.

6. A special receptacle is supplied to store the mains plug during transit. The receptacle is fixed at the back of the cabinet, on the side of the compressor (see diagram). Gently remove the plug from the receptacle. Never pull the main cord, you may damage the appliance. In the case of transportation, ensure you locate the plug in the receptacle provided to avoid transit damage.

Replacing the interior light bulb

To change the Bulb/LED used for the illumination of your refrigerator, call your Authorised Service. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place foodstuffs in the refrigerator/freezer in a safe and comfortable way. The lamps used in this appliance have to withstand extreme physical conditions such as temperatures below -20°C.

Reversing the doors Top door

1. Unscrew the top hinge (1).
2. Carefully remove the top door (2).
3. Unscrew the lower hinge (3).
4. Remove plastic plugs (7 & 8).
5. Refit top hinge (1) as a lower hinge (16) on the left-hand side.
6.  Replace the top door (17).
7.  Refit lower hinge (3) as top hinge (18) on the left-hand side.

Lower door

1. Unscrew the top hinge (4).
2. Carefully remove the lower door (5).
3. Unscrew the lower hinge (6).
4. Remove plastic plugs (9 & 10).
5. Refit hinge (4) as a lower hinge (11) on the left-hand side.
6. Replace the lower door (12).
7. Refit lower hinge (6) as the top hinge (13) on the left-hand side. efit plastic plugs (7, 8, 9 & 10) into the screw holes on the right-hand side (14, 15, 19 & 20).Proceed in numerical order.

Before operating

Final Check
Before you start using the fridge/ freezer check that:

1. The interior is dry and air can circulate freely at the rear of the cabinet.
2. Clean the interior as recommended under “Maintenance and cleaning”.
3. Insert the plug into the wall socket and switch on the electricity supply.  When the door is open the fridge interior light will come on.
4. You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, whether the compressor is running or not which is quite normal.
5. The front edges of the cabinet may feel warm. This is normal. These areas are designed to be warm to avoid condensation.
6. Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend that you check the temperature with an accurate thermometer (see: Using your refrigerator).

Using your refrigerator

Control Panel

1. On / Off Indicator
   Press the On / Off button for 3 seconds to turn off or turn on the fridge. When the fridge is off, the symbol ( ) is lit. All the other symbols are turned off.

2. Quick fridge function button
   The button has two functions. To activate or deactivate the Quick Cool function, press it briefly. Quick Cool indicator will turn off and
   the product return to its normal settings.
   Use the Quick Cooling function when you want to quickly cool the food placed in the fridge compartment. If you want to cool large amounts of fresh food, activate this function before putting the food into the product.
   If you do not cancel it, Quick Cooling will cancel itself automatically after 1 hour at the most, or when the fridge compartment reaches the required temperature. This function is not recalled when power restores after a power failure.

3. Fridge compartment temperature setting button
   Press this button to set the temperature of the fridge compartment to 8, 7, 6, 5, 4, 3, 2, 8… respectively. Press this button to set the fridge compartment temperature to the desired value.

4. Freezer compartment temperature setting button
   Press this button to set the temperature of the freezer compartment to -18, -19, -20, -21, -22, -23, -24, -18… respectively. Press this button to set the freezer compartment
   temperature to the desired value.

5. Quick freeze function button
   Press this button to to activate or deactivate the Quick freeze function. When you activate the function, the freezer compartment will be cooled to a temperature
   lower than the set value.
   Use the Quick Freeze function when you want to quickly freeze the food placed in the freezer compartment. If you want to freeze large amounts of fresh food, activate this function before putting the food into the product.
   If you do not cancel it, Quick Freeze will cancel itself automatically after 25 hours at the most or when the freezer compartment reaches the required temperature. This function is not recalled when power restores after a power failure.

6.  Alarm off warning
   In case of power failure / high-temperature alarm, after checking the food located in the freezer compartment press the alarm off button to clear the warning.

7. Eco fuzzy
   Press and hold the eco fuzzy button for 3 seconds to activate the Eco fuzzy function. The refrigerator will start to operate in the most economic mode at least 6 hours later and the economic usage indicator will be on ( ). Press and hold the eco fuzzy function button for 3 seconds to disable the eco fuzzy function. This indicator will be on after 6 hours when eco fuzzy is activated, provided the doors are not opened. ECO indicator will be active if the freezer compartment temperature is set to -18°C.

8. Vacation Function
   In order to activate the Vacation function, press this button for 3 seconds, and the vacation mode indicator will be activated. When the vacation function is activated, “- -” is displayed on the fridge compartment temperature indicator and no active cooling is performed in the fridge compartment. It is not suitable to keep the food in the fridge compartment for this function. Other compartments will continue to be cooled according to their set temperatures. To cancel this function press the Vacation function button again.

Storing Frozen Food
Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer’s instructions for a frozen food storage compartment.
To ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained, the following should be remembered:

1. Put packets in the freezer as quickly as possible after purchase.
2. Ensure that contents are labeled and dated.
3. Do not exceed the “Use By”, and “Best Before” dates on the packaging. If there is a power failure do not open the door. Frozen food should not be affected if the failure lasts for less than 13 hrs. If the failure is longer, then the food should be checked and either eaten immediately or cooked and then re-frozen.

Freezing Fresh Food

Please observe the following instructions to obtain the best results. Do not freeze too large a quantity at any one time. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible. Do not exceed the freezing capacity of your appliance in 24 h. Placing warm food into the freezer compartment causes the refrigeration compressor to operate continuously until the food is frozen solid. This can temporarily lead to excessive cooling of the refrigeration compartment. You may place fresh food to be frozen in any part of the freezer. Take special care not to mix already frozen food and fresh food.

Making Ice Cubes

Fill the ice – cube tray 3/4 full with water and place it in the Ice Bank. Loosen frozen trays with the handle of a spoon, and never use sharp-edged objects such as knives, or forks. Store ice cubes in the Ice Bank.
Note : If freshly made ice cubes are not consumed for several weeks and stored in Ice Bank, they will slowly reduce in size and eventually disappear completely.

Defrosting
A) Fridge Compartment The fridge compartment defrosts automatically.
The defrosting water runs to the drain tube via a collection container at the back of the appliance (1) (see diagram). During defrosting, water droplets may form at the back of the fridge compartment where the concealed evaporator is located. Some droplets may remain on the liner and refreeze when defrosting is completed. Do not use pointed or sharp-edged objects such as knives, or forks to remove the droplets which have frozen. If at any time the defrost water does not drain from the collection channel, check to ensure that no food particles have blocked the drain tube. The drain tube can be cleared by pushing the special plastic plunger provided down the drain tube (2). Please flush with approximately 100ml of warm tap water, to ensure that the water drains. If the blockage is still present, use a suitable “refrigerator drain cleaning tool”, and flush with
approximately 100ml of warm tap water.
NOTE : Do not flush with excessive water, this will cause the evaporator tray at the back of the appliance to overflow and cause a leak. If the problem persists please contact the service.

B) Freezer Compartment The freezer compartment defrosts automatically.
Warnings!
The fan inside the freezer compartment circulates cold air. Never insert any object through the guard. Do not allow children to play with the freezer fan. Never store products that contain inflammable propellant gas (e.g.dispensers, spray cans etc.) or explosive substances. Don’t cover the shelves with any protective materials, which may obstruct air
circulation. Do not allow children to play with the appliance or tamper with the controls. Do not obstruct the freezer fan guard to ensure that you obtain the best possible performance from your appliance.

VitaminCare+
Fruits and vegetables stored in crispers illuminated with the VitaminCare+ technology preserve their vitamin A and C content for a longer time thanks to the blue, green, red lights and dark cycles, which simulate a day cycle. With this technology, you can keep your fruits & vegetables tasty & healthy longer which helps you to minimize food waste at home. If you open the door of the refrigerator during the dark period of the VitaminCare+ technology, the refrigerator will automatically detect this and enable the blue, green or red light to illuminate the crisper for your convenience. After you have closed the door of the refrigerator, the dark period will continue, representing the night time in a day cycle.

Maintenance and cleaning

• We recommend that you switch off the appliance at the socket outlet and pull out the main plug before cleaning.
• Never use any sharp abrasive instrument, soap, household cleaner, detergent, and wax polish for cleaning.
• Use lukewarm water to clean the cabinet of the appliance and wipe it dry.
• Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of soda to one pint of water to clean the interior and wipe it dry.
• Make sure that no water enters the lamp housing.
• If the appliance is not going to be used for a long period of time switch it off, remove all food, clean it and leave the door ajar.
• Check door seals regularly to ensure they are clean and free from food particles.
• Removal of door rack. – To remove door racks, remove all the contents and then simply push the door rack upwards from the base.
• To remove a freezer drawer, pull it as far as possible, and then tilt it upwards, and then pull it out completely.
• Avoid spillage of food particularly small items like rice, peas, and beans through the fan guard as they may cause the cooling system to block and therefore operate less efficiently.
• If the Condenser or Plastic Evaporator Tray (Which collects the defrost water) located at the back of the product requires cleaning maintenance, please contact service.
  NOTE : This is not usually required under normal operating conditions. These items are not accessible without uninstalling the product.

Do’s and Don’ts

Do- Clean your appliance regularly (see “Maintenance and cleaning”).
Do- Keep raw meat and poultry below cooked food and dairy products.
Do- Take off any unusable leaves on vegetables and wipe off any soil.
Do- Leave lettuce, cabbage, parsley, and cauliflower on the stem.
Do- Wrap cheese firstly in greaseproof paper and then in a polythene bag excluding as much air as possible. For best results take out of the fridge compartment an hour before
eating.
Do- Wrap raw meat and poultry loosely in polythene or aluminum foil. This prevents drying.
Do- Wrap fish and offal in polythene bags.
Do- Wrap food that has a strong odour or can dry out in polythene bags, aluminum foil or place in an airtight container.
Do- Wrap bread well to keep it fresh.
Do- Chill white wines, beer, lager, and mineral water before serving.
Do- Check the contents of the freezer every so often.
Do- Keep food for as short a time as possible and adhere to “Best Before”, “Use by” etc. dates.
Do- Store commercially frozen food in accordance with the instructions given on the packets that you buy.
Do- Always choose high-quality fresh food and be sure it is thoroughly clean before you freeze it.
Do- Prepare fresh food for freezing in small portions to ensure rapid freezing.
Do- Wrap all food in aluminum foil or freezer-quality polythene bags and make sure any air is excluded.
Do- Wrap frozen food when you buy it and put it in the freezer as soon as possible.
Do- Defrost food in the fridge compartment.
Do- Remove ice cream from the freezer 10-20 minutes before serving.
Don’t- Store bananas in your fridge compartment.
Don’t- Store melon in your fridge. It can be chilled for short periods as long as it is wrapped to avoid it flavouring other food.
Don’t- Store poisonous or any dangerous substances in your appliance. It has been designed for the storage of edible foodstuffs only.
Don’t- Consume food that has been stored for an excessive time in the fridge.
Don’t- Store cooked and fresh food together in the same container. They should be packaged and stored separately.
Don’t- Let defrosting food or food juices drip onto food.
Don’t- Leave the door open for long periods as this will make the appliance more costly to run and cause excessive ice formation.
Don’t- Put hot food into the appliance. Let it cool down first.
Don’t- Put liquid-filled bottles or sealed cans containing carbonated liquids into the freezer as they may burst.
Don’t- Exceed the maximum freezing loads (in any 24 hours) when freezing fresh food.
Don’t- Give children ice cream and water ice direct from the freezer. The low temperature may cause ‘freezer burns’ on lips.
Don’t- Freeze fizzy drinks.
Don’t- Try to keep frozen food that has thawed, it should be eaten within 24 hours or cooked and refrozen.
Don’t- Remove items from the freezer with wet hands.
Don’t- Close the freezer door before placing the compartment cover in its place.
Don’t- Leave frozen food at room temperature to thaw; the best way to defrost food is to put it in the fridge to thaw slowly. Make sure you avoid defrosting food or food
juices drip onto other food.

Problem-solving

If the appliance does not operate when switched on, check whether:

• The plug is inserted properly in the socket and the power supply is on. (To check the power supply to the socket, plug in another appliance).
• The fuse has blown/the circuit breaker has tripped/main distribution switch has been turned off. The temperature has been set correctly.
• The new plug is wired correctly if you have changed the fitted molded plug. If the appliance is still not operating after the above checks, please refer to the section on “How to obtain service”. Please ensure that the above checks have been made as a charge will be made if no fault is found.

Installation of high leveling foot

(All dimensions are in mm)

|
---|---

Guarantee Details

BLOMBERG UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS
Your new Blomberg product is guaranteed against faulty materials, defective components or manufacturing defects.
The standard guarantee starts from the date of original purchase of the product and lasts for a period of thirty-six (36) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
If you have any questions about the guarantee on your product (including how long it is valid), please contact your retailer or our contact center on 0333 207 9870 (UK and Northern Ireland) or 01 691 0160 (Republic of Ireland).
This guarantee does not in any way diminish or affect your statutory rights in connection with the product. This guarantee is in addition to your statutory rights as a consumer. If you have any questions about these rights, please contact the retailer from which you purchased the product. In certain circumstances, it is possible that your statutory rights may offer additional or higher levels of protection than those offered under the terms of this guarantee.

What is covered by this guarantee?

• Repairs to the product required as a result of faulty materials, defective components or manufacturing defects.
• Functional replacement parts to repair a product.
• The costs of a Blomberg Approved Engineer to carry out the repair.

What is not covered?

• Transit and delivery damage.

•  Cabinet or appearance parts, including but not limited to control knobs, flaps, and handles.

• Accessories and/or consumable items include but are not limited to ice trays, scrapers, cutlery baskets, filters, and light bulbs.

•  Repairs necessary as a direct or indirect result of:
  – Accidental damage, misuse or abuse of a product.
  – An attempted repair of a product by anyone other than a Blomberg Approved Engineer (the “Engineer”).
  – Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.

• Repairs to a product operated at any time on commercial or non-residential household premises (unless we have previously agreed to the installation environment).
  This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the Manufacturer does not accept and will not be held liable for any financial loss incurred in connection with the failure of any product to operate in accordance with the expected standards. Such financial loss includes but is not limited to loss arising from:

• Time took off work.

• Damaged food, clothing, or other items.

• Meals are taken at restaurants or from takeaways.

• General compensation for the inconvenience.

Important Notes

1.  Your product is designed and built for domestic household use only.
2. The guarantee will automatically be void if the product is installed or is used in commercial or non-residential domestic household premises unless we have previously agreed to the installation environment.
3. The product must be correctly installed, located and operated in accordance with the instructions contained in the User Instructions Booklet provided with your product.
4. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers (as incorrect installation may result in you having to pay for the cost of repairing the product).
5. Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland for the Republic of Ireland) registered gas installer.
6. This guarantee is given in respect of products purchased and used within the United Kingdom and the Republic of Ireland.
7. This guarantee is effective from the initial date of purchase of a new product from an authorized retailer and will be void if the product is resold.
8. This guarantee does not apply to graded sales (where the product is purchased as a “second”).
9. Possession of a copy of these terms and conditions does not necessarily mean that a product has the benefit of this guarantee. If you have any questions, please call our Call Centre on the number set out above.
10.  The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are subjected to physical or verbal abuse in the course of carrying out their duties.
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.

Does Blomberg offer replacements?
This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided. The Manufacturer will cover the costs and arrange for the delivery of the new product and for the return of the old product. Any costs related to disconnecting the faulty product and installing the replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The original guarantee will continue to apply to the replacement product; the new product will not come with a new guarantee.
When will the repair take place?
Our Engineers work Monday to Friday 9.00 am to 5.00 pm. Appointments outside these hours may be possible at the sole discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will endeavor to minimize inconvenience and to meet requests for specific timed appointments, this cannot be guaranteed. We will not be liable for delays or if it is unable to carry out a repair because a convenient appointment cannot be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with proof of purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:

• You cannot provide evidence that your product is covered by this guarantee.
• Where a service call has been made and the engineer finds that there is no fault with your product.
• That your product has not been installed or operated in accordance with the User Instructions Booklet.
• That the fault was caused by something other than faulty materials, defective components or manufacturing defects.
• For missed appointments.

Payment of these costs is due immediately upon the Engineer providing you with an invoice. The Manufacturer reserves the right to terminate the guarantee if you fail to pay the costs for the service call in a timely manner.
If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to the English Courts, save where you live in another part of the United Kingdom, in which case the law and courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have jurisdiction.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU. Beko plc is registered in England and Wales with company registration number 02415578.

Inverter motor guarantee

BLOMBERG UK AND IRELAND OPTIMA INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS
This 10-year guarantee relates to Blomberg products that feature the Optima Inverter Motor. The Optima Motor guarantee terms and conditions are in addition to our Standard guarantee terms and conditions detailed in the previous section.
In order to activate the 10-year guarantee, you MUST register the appliance within 90 days of the original purchase date. You can register by first visiting blomberguk.com/register and by following the online instructions. All Blomberg appliances come with 3-year parts and a labor guarantee as standard. When you register your appliance for the Optima Inverter Motor 10-year guarantee, you are also registering your appliance for the standard 3-year parts and labor guarantee. Blomberg built-in or integrated products purchased from Euronics agents come with 3-year parts and labor guarantee which is extended to 5 years, free of charge, upon registration of the appliance. When you register your appliance for this additional 2 years, you will automatically activate the Optima Inverter Motor 10-year guarantee. You do not need to register twice. To make a claim against your Blomberg Optima Inverter Motor Guarantee (the “Guarantee”), all customer and product details must be registered with Beko plc using the procedure outlined below.

1. This extra 7 years or 5 years (for built-in appliances from Euronics agents) Guarantee is only effective after the expiration of the standard manufacturer’s guarantee.
2. It is only valid for the Optima Inverter motors of selected washing machines, washer-dryers, tumble dryers, and dishwashers. It does not cover any labor charge or any other components of the product. In addition, it is only valid for one replacement of the Optima motor during the extra 9-year (for free standing appliances) or 8-year (for built-in appliances) guarantee period.
3. To activate your guarantee, you MUST register your appliance within 90 days of the original purchase date, by visiting blomberguk.com/register.
4. Customers will receive a unique reference code as proof of guarantee validation by email or post, which must be quoted at the time of a claim being made.
5. Any repair/replacement of the Optima Inverter motor must only be carried out by an authorised Blomberg Service Agent (the “Service Agent”).
6. Labour for the repair/replacement of the Optima Inverter motor is not included in this guarantee and is chargeable directly by the Service Agent.
7. Any additional components fitted to the product at any time will not be covered by this guarantee and will be chargeable directly by the Service Agent.
8. The guarantee is not transferable and cannot be exchanged for cash. There are no alternative or additional offers to this Guarantee.
9. The guarantee is exclusive of the manufacturer’s standard guarantee.
10. The Terms and Conditions shown above are in addition to the standard terms and conditions of your product guarantee. Please read and refer to such Terms and Conditions when making any claim.
11. We may use the information you provide for marketing purposes and to analyze your purchasing preferences. We may keep your information for a reasonable period for these purposes in accordance with the applicable Data Protection Laws and General Data Protection Regulations (GDPR). You can opt into this service during the registration process. Further details are available at http://www.blomberguk.com/cookie and privacy.
12. These Terms and Conditions are governed by the laws of England and Wales; manufacturer: Beko plc, Beko House, 1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578.

How to obtain service

HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE
Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation available should the product require attention under the guarantee. Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services. When you call us you may be required to input your serial number into your telephone keypad. For help please visit Blomberguk.com/support/model-finder.

• The product model number is printed on the Operating Instruction Booklet / User guide.
• The product model and serial number is printed on the Rating Label affixed to the appliance.
• The Retailer (Purchased from) and Date of purchase will be printed on your purchase receipt or other proof of purchase paperwork.

Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for requesting service under guarantee.

For service under guarantee or for product advice please call our Contact centre
Before requesting service please check the troubleshooting guide in the Operating Instructions booklet, as a charge may be levied where no fault is found, and even though your product may still be under guarantee. After arranging service the area around the product must be easily accessible to the Engineer, without the need for cabinets or furniture to be removed or moved. It is your responsibility to ensure our Engineers have a clean and safe environment to carry out any repairs. Please have your Model number and Serial number available when you call us, as you may be required to input your serial number into your telephone keypad during your call.
UK Mainland & Northern Ireland:
0333 207 9870
Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the basic rate. Calls from landlines and mobiles are included in free call packages but please check with your telephone service provider for exact call charges.
Republic of Ireland:
01 691 0160
Service once the manufacturer’s guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document, otherwise please call us using the appropriate number above, where service can be obtained at a charge. Should you experience any difficulty in obtaining service please call us on 0333 207 9870 or 01 691 0160.
Contact us through our website
Send us a secure message through our online contact us form. Please visit our website, click Contact Us , and choose a product support topic from the list of options. Complete the required details and click send a message.
Product registration s
For UK and Republic of Ireland product registrations please visit blomberguk.com/register.

1 Greenhill Crescent, Watford, Hert, WD18 8QU
Tel: 0845 6048340 Fax: 0845 6004922
email: service@blomberguk.com www.blomberguk.co

References

• Blomberg Product Guarantee Registration
• Find Your Model & Serial Number | Blomberg
• Freestanding & Built-In Home & Kitchen Appliances | Blomberg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>