Kobalt Drain Auger User Manual: Learn How to Use 59188 High Carbon Wire Tool
- June 9, 2024
- Kobalt
Table of Contents
The KOBALT 59188 High Carbon Wire Drain Auger is a powerful tool designed to clear clogs and blockages in your drains. To ensure safe and effective use of the product, it is important to read and understand the user manual before operating it. This manual provides detailed instructions on how to use the autofeed auger, including warnings and cautions to prevent personal injury or product failure. The preparation section outlines the necessary steps to take before operating the tool, such as ensuring all parts are present and undamaged. The operating instructions provide a step-by-step guide on how to use the auger, including how to work through clogs and retrieve the cable back into the drum. The manual also includes care and maintenance instructions to keep the tool in good condition, as well as warranty information for any issues that may arise. If you have any questions or concerns about the product, the customer service department is available to assist you. With this user manual, you can confidently use the KOBALT 59188 High Carbon Wire Drain Auger to clear any drain blockages in your home or business.
KOBALT 59188 High Carbon Wire Drain Auger
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Autofeed Auger | 1 |
WARNINGS
- Do not use this product until you read and understand all instructions.
- Failure to follow these instructions may result in personal injury, property damage or product failure.
- Do not use this drum auger in a drain if chemical cleaners have just been used .
CAUTION: Always use drill at consistent lower speed. (less than 400 rpm).
PREPARATION
- Before operating product, make sure all parts are present.
- Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to operate the product.
OPERATING INSTRUCTIONS
-
Push toggle switch to unlock cable (see Fig. 1!Unlock).
-
Pull cable out of the drum and push into drain as far as it will go (see Fig. 2).
-
Pull toggle switch to engage auto feed mechanism (see Fig. 1 Lock).
-
If using a power drill (see Fig. 4), always use drill at consistent lower speed (less than 400 rpm).
-
Turn the drum clockwise and the cable will gradually feed into the drain until it reaches a clog or elbow (see Fig. 2). Cable can also be rapidly advanced/retracted by feeding in and out of the drum by hand.
-
Carefully work the cable through the clog. Do not force the cable. If the cable stops turning, spin the cable without advancing it, or advancing the cable very slowly. If the cable becomes stuck in the clog, back the cable out of the clog by turning the drum in reverse. Repeat above steps, if necessary.
-
Once clog is cleared, turn the drum in reverse, retrieve cable back into drum (see Fig. 3).
-
Flush Drain.
CARE AND MAINTENANCE
Wash, air dry and oil tool before storing.
WARRANTY
Lifetime Hassle-Free Guarantee. You should never have a problem with your Kobalt™ tools. However if you do, return the item to the place of purchase for a free replacement. No questions asked .This warranty excludes incidental/ inconsequential damages and failures due to misuse, abuse, normal w
ear and tear and dulling of the blade ( s ).For warranty information, call l-888-3KOBALT, 8 a.m. -8 p.m , EST, Monday-Sunday. You could also contact us at partsplus@lowes.com. AS22214
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888 3KOBAL T ~ (1-888-356-2258), 8 a.m. – 8 p.m., EST, Monday- Sunday. You could also contact us at partsplus@lowes.com.
SPECIFICATION
| Product Name | KOBALT 59188 High Carbon Wire Drain Auger |
|---|---|
| Package Contents |
- Autofeed Auger x 1
Warnings|
- Read and understand all instructions before use
- Do not use in a drain if chemical cleaners have just been used
- Always use drill at consistent lower speed (less than 400 rpm)
Preparation|
- Ensure all parts are present and undamaged before use
Operating Instructions|
- Push toggle switch to unlock cable
- Pull cable out of drum and push into drain as far as it will go
- Pull toggle switch to engage auto feed mechanism
- If using a power drill, always use drill at consistent lower speed (less than 400 rpm)
- Turn drum clockwise to feed cable into drain until it reaches a clog or elbow
- Carefully work cable through the clog, do not force cable
- If cable becomes stuck in clog, back cable out of clog by turning drum in reverse
- Once clog is cleared, turn drum in reverse to retrieve cable back into drum
- Flush drain
Care and Maintenance|
- Wash, air dry, and oil tool before storing
Warranty|
- Lifetime Hassle-Free Guarantee
- Excludes incidental/inconsequential damages and failures due to misuse, abuse, normal wear and tear, and dulling of the blade(s)
- For warranty information, call 1-888-3KOBALT or email partsplus@lowes.com
Customer Service|
- For questions or concerns, call 1-888-3KOBALT or email partsplus@lowes.com
FAQS
What is the KOBALT 59188 High Carbon Wire Drain Auger used for?
The KOBALT 59188 High Carbon Wire Drain Auger is a powerful tool designed to clear clogs and blockages in your drains.
What should I do before operating the KOBALT 59188 High Carbon Wire Drain Auger?
Before operating the product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to operate the product.
How do I use the KOBALT 59188 High Carbon Wire Drain Auger?
Push toggle switch to unlock cable. Pull cable out of the drum and push into drain as far as it will go. Pull toggle switch to engage auto feed mechanism. Turn the drum clockwise and the cable will gradually feed into the drain until it reaches a clog or elbow. Carefully work the cable through the clog. Once clog is cleared, turn the drum in reverse, retrieve cable back into drum. Flush Drain.
Can I use the KOBALT 59188 High Carbon Wire Drain Auger in a drain if chemical cleaners have just been used?
No, do not use this drum auger in a drain if chemical cleaners have just been used.
What should I do if the cable becomes stuck in the clog?
If the cable becomes stuck in the clog, back the cable out of the clog by turning the drum in reverse. Repeat above steps, if necessary.
How should I care for and maintain the KOBALT 59188 High Carbon Wire Drain Auger?
Wash, air dry and oil tool before storing.
What is the warranty for the KOBALT 59188 High Carbon Wire Drain Auger?
The KOBALT 59188 High Carbon Wire Drain Auger comes with a Lifetime Hassle- Free Guarantee. If you have any issues, return the item to the place of purchase for a free replacement. This warranty excludes incidental/ consequential damages and failures due to misuse, abuse, normal wear and tear and dulling of the blade(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>