NINJA BL610 Professional Blender User Guide

NINJA BL610 Professional Blender

THANK YOU FOR PURCHASING

The Ninja® Professional Blender 1000

IMPORTANT SAFETY INSTRUCTIONS

WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions must always be followed, including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.

1. Read all instructions prior to using the appliance and its accessories.

2. Carefully observe and follow all warnings and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

3. Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.

4. Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.

5. Blades are sharp. Handle carefully.

6. This product is provided with a Stacked Blade Assembly. ALWAYS exercise care when handling blade assembly.
   The blade assembly is sharp and is NOT locked in place in its container.
   The blade assembly is designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft.
   Failure to use care when handling the blade assembly will result in a risk of laceration.

7. Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet.
   NEVER unplug by grasping and pulling the flexible cord.

8. Before use, wash all parts that may contact food. Follow washing instructions covered in this instruction manual.

9. Before each use, inspect blade assembly for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.

10. DO NOT use this appliance outdoors.
    It is designed for indoor household use only.

11. This appliance has a polarized plug (one prong is wider than the other).
    To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.

12. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.

13. This appliance has important markings on the plug blade. The entire supply cord is not suitable for replacement. If damaged, please contact SharkNinja for service.

14. Extension cords should NOT be used with this appliance.

15. To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.

16. DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.

17. DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.

18. ALWAYS use the appliance on a dry and level surface.

19. DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.

20. This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

21. ONLY use attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja may cause fire, electric shock, or injury.

22. NEVER place the blade assembly on the motor base without it first being attached to the container with the lid also in place.

23. Keep hands, hair, and clothing out of the container when loading and operating.

24. During operation and handling of the appliance, avoid contact with moving parts.

25. DO NOT fill container past the MAX FILL or MAX LIQUID lines.

26. DO NOT operate the appliance with an empty container.

27. DO NOT microwave container or accessories provided with the appliance.

28. NEVER leave the appliance unattended while in use.

29. DO NOT blend hot liquids. Doing so may result in pressure buildup and steam exposure that can pose a risk of the user being burned.

30. DO NOT process dry ingredients with the Stacked Blade Assembly.

31. DO NOT perform grinding operations with the Stacked Blade Assembly.

32. NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure the container and lid are properly installed before operation.

33. Before operation, ensure all utensils are removed from container. Failure to remove utensils can cause container to shatter and potentially result in personal injury and property damage.

34. Keep hands and utensils out of container while chopping to reduce the risk of severe personal injury or damage to the blender/food chopper.
    A scraper may be used ONLY when the blender or processor is not running.

35. DO NOT open pour spout cap while blender is operating.

36. If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the lid, and use a spatula to dislodge ingredients.
    NEVER insert your hands into the pitcher, as you may contact one of the blades and experience a laceration.

37. DO NOT attempt to remove the container or lid from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing lids and containers.

38. If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, unplug the appliance and allow it to cool for approximately 30 minutes before using again.

39. DO NOT expose the container and accessories to extreme temperature changes. They may experience damage.

40. Upon completion of processing, ensure the blade assembly is removed
    BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the container.
    Failure to remove the blade assembly before emptying the container results in a risk of laceration.

41. If using the pour spout, hold the cover in place on the container or ensure lid lock is engaged when pouring to avoid risk of injury.

42. The maximum wattage rating for this appliance is based on the configuration of the Stacked Blade Assembly and the pitcher.

43. DO NOT submerge the motor base or control panel in water or other liquids.
    DO NOT spray motor base or control panel with any liquid.

44. DO NOT attempt to sharpen blades.

45. Turn off the appliance and unplug the motor base before cleaning.
    SAVE THESE INSTRUCTIONS

PARTS

There are a variety of accessories that are compatible with this blender series.
NOTE: The top flap of your box shows the select accessories that are included with your model.
To purchase more accessories and find great recipes, visit ninjakitchen.com.

PARTS

• A Lid with Locking Handle
• B Stacked Blade Assembly
• C 72 oz.* Pitcher
• D Motor Base
  64 oz. max liquid capacity
  

BEFORE FIRST USE

NOTE: All attachments are dishwasher safe. It is recommended that the lid and blade assembly be placed on the top rack of the dishwasher. Ensure blade assembly and lid are removed from the pitcher before placing in the dishwasher. Exercise care when handling blade assembly

1. Remove all packaging material and labels from the appliance. Separate all parts from each other.
2. Wash the pitcher, lid, and blade assembly in warm, soapy water. When washing the blade assembly, use a dish-washing utensil with a handle to avoid direct hand contact with the blades.
3. Handle blade assembly with care to avoid contact with sharp edges. Rinse and air-dry thoroughly.
4. The pitcher, lid, and blade assembly are all dishwasher safe. It is recommended that the lid and blade assembly be placed on the top rack. Ensure the blade assembly is removed from the pitcher before placing in the dishwasher.
5. Wipe the motor base clean with a damp cloth.

ASSEMBLY & USE OF THE PITCHER

ASSEMBLY

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
   Press down on the motor base to make sure that the suction cups adhere to the counter or tabletop.

2. Align and lower the pitcher onto the motor base. Handle should be aligned slightly to the right of the LOCK symbol on the motor base.

3. Rotate the pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base.

4. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.

5. Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure the blade assembly is seated properly and is standing upright.
   NOTE: The blade assembly will fit loosely on the drive gear.

6. Add ingredients to the pitcher, making sure they do not exceed the highest measured marking line on the side of the pitcher

NOTE: Add liquid ingredients first and then dry ingredients. DO NOT exceed the MAX LIQUID mark (64 oz.) on the pitcher.
NOTE: When blending any kind of liquids, such as drinks or smoothies, do not exceed the MAX LIQUID mark (64 oz.) on the pitcher.
NOTE: If you need to add additional ingredients while the blender is running, open the pour spout cap and pour the ingredients in through the opening.

7. Holding the lid by the handle in the upright position, place it on top of the pitcher, aligning the triangle ( ) located on the lid with the triangle ( ) located on the pitcher’s handle. Press the handle down until you hear a click. The triangles on the lid and pitcher handle MUST be aligned for the blender to turn on.

8. Plug the power cord into an electrical outlet and press the power button ( )
   

9. Select the speed according to your blending requirements*:

   • Use the LOW setting for processing and mixing.
   • Use the MEDIUM setting for blending and ice crushing.
   • Use the HIGH setting for pureeing and liquefying.
   • Use the PULSE button for controlled chopping and processing.
     See Blending Chart.
     NOTE: Pulse ingredients for even chopping by pressing the PULSE button in short intervals.
     

10. When ingredients have reached your desired consistency, stop the blender by pressing the power button ( ) then wait for the blade to stop turning.
    

11. Turn the pitcher counterclockwise, then lift it up and off the base.

12. a Open the pour spout cap and use the spout to empty liquid contents.

13. b For thicker consistencies, first remove the lid. Press the release button on the lid, pull the handle up to a 90 degree angle, then lift lid off the pitcher.
    Carefully remove the blade assembly by the top of the shaft. Place blade assembly away from the work area to avoid accidental contact. Empty contents from the pitcher.
    

14. Unplug the motor base when unit is not in use. To release the motor base from the counter or tabletop, place your hands underneath both sides of the motor base and gently pull the unit up and toward you.

CARE & MAINTENANCE

CLEANING

1. Separate all parts from each other.

2. Hand-Washing: Wash the pitcher, lid, and blade assembly in warm, soapy water. When washing the blade assembly, use a dish-washing utensil with a handle to avoid direct hand contact with blades.
   Handle blade assembly with care to avoid contact with sharp edges. Rinse and air-dry thoroughly.

3. Dishwasher: The pitcher, lid, and blade assembly are all dishwasher safe. The lid and blade assembly are top rack dishwasher safe. Ensure the blade assembly is removed from the pitcher before placing in the dishwasher.

4. Wipe the motor base clean with a damp cloth.

STORING
Store the unit upright with the blade assembly inside the pitcher with the lid secured on top. Do not place anything on top of the lid. Loosely wrap the power cord around the cord storage hook in the back of the unit.

RESETTING THE MOTOR THERMOSTAT
The unit features a unique safety system that prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting procedure below:

1. Unplug the appliance from the electrical outlet.
2. Remove and empty the container and ensure no food is jamming the Stacked Blade Assembly.
3. Allow the appliance to cool for approximately 15 minutes.
4. Re-install the container onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before, making sure not to exceed the recommended maximum capacities.

BLENDING CHART

marinades, scramble eggs, puree cooked foods and uncooked fruits, and chop vegetables for dips and salsa.
MEDIUM| Blending & Ice Crushing| Use to grate hard cheeses, beat dips, grind nuts, and thoroughly chop. Blend mixed drinks, powdered drinks, milk shakes, spreads, sauces, and soups.
HIGH| Pureeing & Liquefying| Use to mix smoothies and frappes, liquefy thick mixtures, and blend whole fruits and vegetables.
PULSE| Controlled Processing & Bursts of Power| Use to control chopping and processing.

When blending sauces and soups, make sure they’re cooled to room temperature first. Ninja® containers are not intended for hot blending.

IMPORTANT: Do not run the appliance over 4 minutes at a time to prevent overheating.

REPLACEMENT PARTS

To order additional parts and accessories, visit ninjaaccessories.com
or contact Customer Service at 1-877-646-5288.

PRODUCT REGISTRATION

Please visit registeryourninja.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase, and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering, you acknowledge you have read and understood the instructions for use and warnings set forth in the accompanying instructions.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before troubleshooting.

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

• Make sure the container is securely placed on motor base.
• Make sure the lid is securely on container in the correct position (align arrows).
• The appliance is turned “Off”. Press the power button ( ) to turn “On”.
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• The unit has overloaded. The appliance will stop and the power light will flash. Unplug and wait approximately 15 minutes before using again.
• The unit has overheated. Unplug and wait approximately 15 minutes before using again.
• Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

• Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

Food is Chopped Too Fine or is Too Watery.

• The food has been overprocessed. Use the Pulse button for controlled processing.

Food Collects on Lid or on the Sides of the Container.
The mixture is too thick. Add more liquid.

You Cannot Achieve Snow From Solid Ice.

• Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
• Start with a few pulses and then go to a continuous blending cycle.

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1.   Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at register your ninja. com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

REGISTER YOUR PURCHASE

registeryourninja.com
1-877-646-5288
  Scan QR code using mobile device

RECORD THIS INFORMATION

Model Number:____
Serial Number: ____
Date of Purchase: __
(Keep receipt)
Store of Purchase:__

THIS BOOK COVERS MODEL NUMBER:
BL610, BL611
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 1000 Watts
PITCHER CAPACITY:
72 oz (2.1 L, 8 cups)
MAX LIQUID CAPACITY:
64 oz. (1.9 L, 8 cups)

SharkNinja Operating LLC
US: Needham, MA 02494
1-877-646-5288
ninjakitchen.com
Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.
NINJA is a registered trademark of SharkNinja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents

SharkNinja Operating LLC
États-Unis : Needham, MA 02494
1 877 646-5288
ninjakitchen.com
sharkninja.com/uspatents

SharkNinja Operating LLC
EE. UU.: Needham, MA 02494
1-877-646-5288
ninjakitchen.com
sharkninja.com/uspatents
PRINTED IN CHINA
© 2020 SharkNinja Operating LLC BL610Series_E_F_S_IB_MP_Mv6

@ninjakitchen

Documents / Resources

| NINJA BL610 Professional Blender [pdf] User Guide
BL610 Professional Blender, BL610, Professional Blender, Blender
---|---

References

• Sharkninja Home
• Sign In

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>