abl Port El Desk Power Module User Manual
- June 5, 2024
- ABL
Table of Contents
abl Port El Desk Power Module
Thank you for purchasing ABL’s Port El power module. Port El has been manufactured and tested in accordance with relevant standards (see contact page).
OVERVIEW
INSTALLATION
Ensure that there is sufficient clearance, 150mm below the surface and 30mm between the cut-out edge and the edge of the work surface.
- Step 1: Place the module in the desk cut-out.
- Step 2: Whilst twisting the locking ring, set the module orientation.
- Step 3: Connect the mains lead with the 3 Pole Connector.
MAIN FEATURES
The module is available in Black, White, or Grey: with an elegant, Silver
aluminum ring. Available configurations: one socket, one smart charge, and up
to two media connections. The rated voltage of the Port El power module unit
is 250V AC (C, E, F, G, J, L). for B-type sockets 120V AC
The nominal intensity of the unit:
-
* 13A for G-type sockets- 16A for B, C, E, F, J, L type sockets
- G type sockets are individually fused with 3.15A or 5A fuse to comply with BS6396
- Fit into an 80mm port hole, and desk thickness between 15 and 45mm
- The locking ring enables quick installation and fitting with no effort
Note: The most common socket types:
- Contact us for more information.
SAFETY NOTES
- Items such as Vacuum Cleaners, Kettles, Coffee Makers, and Fan Heaters should not be connected via these power modules
- Installation is to be carried out by a qualified professional.
- Complies with BS 5733 (UK) IEC 60884-1 and IEC 60884-2-7 (Europe)
- Kitemark certified on 13A Plugs and Socket outlets (KM686563)
- Manufacturing in-house within central Europe is under strict compliance with ISO 9001:2015
CONTENTS
- Port El power module
Note: Use mains lead cable to connect Port El power module with the main power supply.
MAINTENANCE
Do not open, disassemble, change, or modify the device. Every unauthorized opening or repairing ofthe device leads to loss of warranty. During device USage, yoU need to follow basic safety measures. since safety requirements vary, please check with local lawS.
WARRANTY CONDITIONS
ABL warrants this product as free of defects in material, design, and workmanship for the period of twenty-four (24) months from the original date of receipt of the product, unless applicable nafional laws stipulate otherwise.lf during the period of warranty this product proves defective under normal use and service you should return the product to the retailer from whom it was originally purchased. The liability of the ABL is limited to the cost of repair and/or replacement of the unit under warranty. The warranty is void if a failure occurs due to the following reasons:
- Improper device installation
- Improper handling
- Improper transport
- Force majeure
WARNING: Do not use this product for any other purpose other than what it was designed for.
CONTACT US
UK DISTRIBUTION CENTRE
- 14 Fleming Close
- Park Farm Ind. Estate Wellingborough Northants NN8 6UF
- United Kingdom
- 44 (0) 1933 400 080
- [email protected]
EMEA DISTRIBUTION CENTRE
- Lava Tolstoja 25 32103 Cacak Serbia
- +381 (0) 32 420 100
- [email protected]