GLACIER BAY 20203-9010H 3-Piece Bath Hardware Set with Towel Bar User Manual

GLACIER BAY 20203-9010H 3-Piece Bath Hardware Set with Towel Bar

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

Warranty

LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-Glacier (1-855-434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse, or normal wear and tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the  rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-Glacier for more details.

Pre-Installation

PLANNING INSTALLATION

Before beginning installation of this product, ensure all parts are present. Compare parts with the Package Contents and Hardware Included list. If any part is missing or damaged, do not attempt to install the product.

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

A B C D

E

F

| Towel bar post (right) 24 in. Towel bar Towel bar post (left) Towel ring

Tissue holder

Robe hook

| 1

1

1

1

1

1

Installation

1. Marking the mounting location

   • Remove the set screw (DD) from the base of the product posts.
   • Place the product in the desired mounting location, using a level to position it accordingly, and use a pencil to lightly mark the outline of the post(s).
   • Center the mounting bracket (BB) within the marked post location(s), and mark where the screw holes will be drilled.
   • Repeat this step as needed for each bath accessory.
     NOTE: The included template (EE) may be used to mark the mounting locations for the towel bars: A and D for the 24 in. towel bar.

2. Installing the mounting brackets

   • Drill 1/4 in. holes in the previously marked locations.
   • Push the plastic anchors (CC) flush into the dry wall.
   • Fasten the mounting bracket (BB) to the wall with the wood screws (AA).
   • Repeat this step as needed for each bath accessory.
     NOTE: When mounting the products to a wood wall, fasten the mounting brackets (BB) to the wall using the wood screws (AA). There will be no need for drilling or plastic anchors (CC).

3. Installing the product

   • Place the post (A or D) over the mounting bracket (BB) and secure it with the set screw (DD), as shown.
   • Repeat this step for the remaining post (D or A).
     NOTE: Ensure the towel bar is inserted prior to securing the second post to the mounting bracket (BB).

Care and Cleaning

• Preserve the finish of the bath accessory using a non-abrasive wax.
• When using non-abrasive cleaners, rinse off immediately when finished cleaning the bath accessory.
• Do not use abrasive cleaners when cleaning this bath accessory.

Service Parts

*Towel bar, Rings and Posts are not available service parts.

Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday
9 a.m. – 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>