MiSUMi Guided Flat Belt Conveyor Full Belt Instructions
- June 4, 2024
- MiSUMi
Table of Contents
Guided Flat Belt Conveyor Full Belt Type
Guided Belt to Prevent Lateral Movement, End Drive, 2-Groove Frame (Pulley
Dia. 30mm)
Guided Flat Belt Conveyor Full Belt
Features: Conveyor with a full-width belt that the entire surface can be
used for transporting. The belt with the guide prevents lateral movement.
Guided Flat Belt Conveyor Full Belt Type – Guided Belt to Prevent Lateral
Movement, End Drive, 2-Groove Frame (Pulley Dia. 30mm)
Motor Specifications
Output (W)| Motor| Reduction Ratio| Motor
Length (A)
---|---|---|---
Specification| Manufacturer
6W| Constant Speed Motor| Panasonic| 12.5–25| 101.0
30–180| 108.0
Oriental| 12.5–18| 105.0
25–180| 115.0
Taiwanese| 12.5–75| 119.7
90–180| 125.7
Variable Speed Motor| Oriental| 12.5–18| 115.0
25–180| 125.0
Taiwanese| 12.5–75| 131.9
90–180| 137.9
25W| **** Constant Speed Motor| Panasonic| 5–180| 115.0
Oriental| 5–18| 117.0
25–180| 127.5
Taiwanese| 5–75| 129.0
90–180| 136.0
Variable Speed Motor| Oriental| 5–18| 127.0
25–180| 137.5
Taiwanese| 5–75| 139.5
90–180| 146.5
Conveying Capacity
Belt Speed (m/min)
*Reference Value may be different by selected Belt.
Gearhead Reduction Ratio
- May decrease depending on load condition.
| Gearhead Reduction Ratio | Belt Speed (m/min) |
|---|---|
| 50Hz | 60Hz |
| 5 | 56.4 |
| 7.5 | 37.6 |
| 9 | 31.3 |
| 12.5 | 22.6 |
| 15 | 18.8 |
| 18 | 15.7 |
| 25 | 11.3 |
| 30 | 9.4 |
| 36 | 7.8 |
| 50 | 5.6 |
| 60 | 4.7 |
| 75 | 3.8 |
| 90 | 3.1 |
| 100 | 2.8 |
| 120 | 2.4 |
| 150 | 1.9 |
| 180 | 1.6 |
Miniature Conveyors
__
Part Number
| Width B 10mm Increment| Length L 5mm Increment| Motor| __
Belt Specification
| FYA
(Additional Counterbores) 5mm Increment
| Motor Manufacturer Selection
The prices vary by manufacturer.
---|---|---|---|---|---|---
Output (W)| Voltage (V)| Specification| Gearhead
Reduction Ratio
CVSFC| 70–300| 280–2000| __
6
25
| (Single-Phase)
TA100 TA110 TA115 TA200
TA220 TA230
| IM
(Constant Speed Motor)
SCM
(Variable Speed Motor)
| __
__
12.5 15 18 25 30 36 50 60
75 90 100 120 150 180
__
__
__
5–9 not applicable for 6W Motor
| H (General Purpose, Green)
W (General Purpose, White) G (For Sliding, Green) S (For Sliding,
White) D (Static Conductive) F (For Food, White)
O (Oil Resistant)
N (Non-Stick Food Grade)
J (No Belt)
- For belts other than the above, select from Belt Specification below.
| __
__
__
190< FYA <L-210
- When not specified, there will be no additional counterbores.
| __
__
A (Panasonic Motor)
B (Oriental Motor)
C (Taiwanese Motor)
- SCM (Variable Speed Motor) is not selectable for A.
25| __
(Three-Phase) SA200 SA220 SA230
| __
IM
(Constant Speed Motor)
6 25| NV (No Motor)| NM (No Motor)| NH (No Gearhead)| R (No Motor, Gearhead)
Connect the motor so that the belt rotates in the direction of
conveyance.
When “No motor, gearhead” is selected, the motor mounting hole pitch
will vary depending on the motor’s power rating. Please see Technical
Information in our Conveyor Selection website for the dimension details.
When “No motor, gearhead” is selected, this unit will be delivered
unassembled. The customer is to assemble the unit according to the included
assembly instructions. See our Conveyor Selection site for assembly procedures
and packaging details.
Note that warpage might occur on the guided belt depending on the number
of plies (thickness).
Belt Specification| Standard Belt| Optional Belt 1| Optional
Belt 2| No Belt
---|---|---|---|---
General Purpose| H (Green), W (White)| —| —|
J (No Belt)
For Sliding| G (Green), S (White)| —| —
For Inclined Transfer| —| —| —
Grip Type| —| —| GG (Green), GW (White)
Oil Resistant| O (Green)| OW (White)| —
Non-Stick Food Grade| N (White)| NB (Sky Blue), NBG (Lime Green)
HH (Green), HW (White)| —
Food Grade| —| KW (White), KSB (Sky Blue), PHB (Sky Blue)| —
Static Conductive| D (Black)| —| —
**** If using Optional Belts, please select motor manufacturer A or B (Motor C is applicable for Standard Belt only.)
| Part Number | B | Available Types |
|---|---|---|
| L280– 300 | L305– 400 | L405– 500 |
| 600 | L605– 700 | L705– 800 |
| L905– 1000 | L1005– 1100 | L1105– 1200 |
| 1300 | L1305– 1400 | L1405– 1500 |
| L1605– 1700 | L1705– 1800 | L1805– 1900 |
2000
CVSFC
| 70–100| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
110–150| —| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
160–200| —| —| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
210–250| —| —| —| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
260–300| —| —| —| —| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Motor Position Reversed
Motor Cover with Window
Brackets for Speed Controller Included
Post-Assembly Insertion Nuts Included
Motor with Terminal Box
Stands (Legs)
For details of alterations, see P.1276.
There’s more on the web: misumiusa.com
Check out misumiusa.com for the most current pricing and lead time.
Conveyor Resource Site:
http://www.misumiusa.com/conveyor/
Conveyor selection, Design your own kit, & Maintenance parts search.