HOME ACCENTS HOLIDAY TY-100SM-BLS 100L Blue Mini LED Lights User Manual
- June 9, 2024
- HOME ACCENTS Holiday
Table of Contents
TY-100SM-BLS 100L Blue Mini LED Lights
User Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
including the following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
c) This seasonal use product is not intended for permanent installation
or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles
or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the
nighthor if left unattended.
h) This is an electric product-not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or placed
where small children can reach it. i) Do not use this product for other
than its intended use.
j) Do not hang ornaments is other objects from cord, wire,. or light
strinc.
k) Do not close doors or windows on the product or extension cords as t s
may damage the wire insulation.
l) Do not cover the product with cloth, paper or any material not part of
the product when in use.
m) This product is equipped with push-in type LED lamps. Do not twist
lamps.
n) This product employs overload protection (fuse) A blown fuse indicates
an overload or short-circuit situation. If the fuse blowshunplug the product
from the outlet. Also unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded.
o) Read and follow all instructions that are on the product or provided
with the product.
SAVE THESE INSTRUCTIONS USE AND CARE INSTRUCTIONS
a) When the product is placed on a live tree, the tree should be well
maintained and fresh. Do not place on live trees in which the needles are
brown or break off easily. Keep the tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured
and stable.
c) Before using or reusing, inspect product carefully. Discard any
products that have cut, damaged, or frayed wire insulation or cords, cracks in
the lampholders or enclosures,loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever
it is placed, including trees, branches, or bushes, to avoid any undue strain
or stress on the aroduct conductors, connections, and wires.
e) Nhen not in use, store neatly in a cool dry location protected from
sunlight.
f) The LED lamp has polarity. Do not deliberately change the direction of
the LED lamp in the lampholder.
USER SERVICING INSTRUCTIONS
To replace the fuse:
a) Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment
plug towards blades.
c) Remove fuse carefully. Turn plug over to remove fuse.
d) Risk of fire. Replace fuse only with 3 Amp, 125Volt fuse(provided with
product.)
e) Close fuse cover. Slide closed the fuse access cover on top of
attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment plug is
damaged.
To replace a lam:
a) Grasp plug and remove from the receptacle or other outlet device. Do
not unplug by pulling on cord.
b) Unlock the burned out LED lamp by lifting the hook and pull lamp and
plastic base straight out of lampholder as shown in Fig.1.
c) Insert the spare LED lamp into the lampholder in correct direction and
lock the hook of lamp base by pushing lock down into the tab as shown in
Fig.2.
d) Replace lamp with only 3.4 volt, 0.068 watt LED type lamps provided
with this product.
CAUTION
a) Do not exchange the lamp base on the new lamp with the old one or the
LED wires may break. ”
b) Pull lamp and plastic base straight out of lampholder.
c) Do not deliberately change the direction of the LED lamp in the
lampholder (always match the hook to the tab, see Fig. 2). 
CAUTION:
This string is rated 7.2 Watts ( 0.06Amps ), do not overload. Connect other
Lighting Strings or decorative outfits end-to-end up to a maximum of 216 Watts
(1.8Amps) total. If connecting to a lighting strip l that does not have a
wattage (W) ratinc (found on the tag within 6 inches of the plug), Calculate
The wattage (W) as follows: Multiply the current (A which is on the flag type
label located Within 6 inches of the plug, by 120.
For example, string is rated 1 OV, 60Hz, 0.06Amps 0.06×120=7.2 Watts.
Total amount of wattage that can be connected 216W-7.2W=208.8W
CAUTION:
a) Risk of fire. This product does not contain lamp shunts, which allow
the product to operate if one lamp burns out. Do not replace lamps with other
than the spare lamps provided with this product.
b) Replace lamps only with 3.4 volt, 0.068 watt spare LED lamps provided
with this product.
CAUTION: To reduce the risk of fire and electric shock:
a) Do not install on trees having needles, leaves or branch coverings of
metal or materials which look like metal.
b) Do not mount or support strings in a manner that can cut or damage
wire insulation.
FOR INDOOR AND OUTDOOR USE
MODEL NO. LED-100L/3WB-17-C
Documents / Resources
| HOME
ACCENTS HOLIDAY TY-100SM-BLS 100L Blue Mini LED
Lights
[pdf] User Manual
TY-100SM-BLS, 100L Blue Mini LED Lights, Mini LED Lights, 100L Blue LED
Lights, LED Lights, Lights
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>