MOBICOOL MCG15 15L Compressor Cooler User Manual

: June 6, 2024
: MOBICOOL

Table of Contents

MOBICOOL MCG15 15L Compressor Cooler
Safety instructions
Scope of delivery
Intended use
Function description
Operation
Cleaning and maintenance
Troubleshooting
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOBICOOL MCG15 15L Compressor Cooler

MOBICOOL-MCG15-15L-Compressor-Cooler -

Explanation of symbols

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein.

You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit dometic.com

MOBICOOL-MCG15-15L-Compressor-Cooler -fig 4

Safety instructions

WARNING! Failure to obey these warnings could result in death or serious injury.
Electrocution hazard

Do not operate the cooling device if it is visibly damaged.
If this cooling device’s power cable is damaged, it must be replaced by the manufacturer, a service agent or a similarly qualified person in order to prevent safety hazards.
This cooling device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.

Fire hazard

When positioning the device, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the device.

Health hazard

This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
Children aged from 3 to 8 years are allowed to load and unload cooling devices.

Explosion hazard

Do not store any explosive substances such as spray cans with a flammable propellant in the cooling device.

CAUTION! Failure to obey these cautions could result in minor or moderate injury.
Electrocution hazard

Before starting the cooling device, ensure that the power supply line and the plug are dry.
Disconnect the cooling device from the power supply
before each cleaning and maintenance
after every use

Health hazard
To avoid contamination of food, please respect the following instructions:

Please check if the cooling capacity of the device is suitable for storing the food or medicine you wish to cool.
Food may only be stored in its original packaging or in suitable containers.
Opening the cooling device for long periods can cause signifi-cant increase of the temperature in the compartments of the device.
Clean regularly surfaces that can come in contact with food and accessible drainage systems.
If the device is left empty for long periods:
- Switch off the device.
- Defrost the device.
- Clean and dry the device.
- Leave the lid open to prevent mould developing within the device.

NOTICE! Damage hazard

Check that the voltage specification on the type plate corresponds to that of the energy supply.
Only connect the cooling device as follows:
- With the DC connection cable to a DC power supply in the vehicle
- Or with the AC connection cable to an AC power supply
Never pull the plug out of the socket by the cable.
If the cooling device is connected to a DC outlet: Disconnect the cooling device and other power consuming devices from the bat-tery before connecting a quick charging device.
If the cooling device is connected to a DC outlet: Disconnect the cooling device or switch it off when you turn off the engine. Otherwise you may discharge the battery.
The cooling device is not suitable for transporting caustic materials or materials containing solvents.
The insulation of the cooling device contains flammable cyclo-pentane and requires special disposal procedures. Deliver the cooling device at the end of its life-cycle to an appropriate recycling center.
Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for the purpose.
Do not place the cooling device near naked flames or other heat sources (heaters, direct sunlight, gas ovens etc.).
Risk of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation on all four sides of the cooling device. Keep the ventilation area free of any objects that could restrict the air flow to the cooling components.
Do not place the cooling device in closed compartments or areas with none or minimal air flow.
Ensure that the ventilation openings are not covered.
Do not fill the inner container with ice or fluids.
Never immerse the cooling device in water.
Protect the cooling device and cables against heat and moisture.
The device shall not to be exposed to rain.

Scope of delivery

MOBICOOL-MCG15-15L-Compressor-Cooler -fig 5

Intended use

The cooling box is suitable for cooling food. The cooling box is also suitable for use on vehicles. The cooling box is designed to be operated from a DC power supply socket of a vehicle or from an AC power supply.
The cooling box is suitable for camping use.
The cooling box is not suitable for:

storage of corrosive, caustic or solvent-containing substances
freezing of food
This cooling box is not intended to be used as a built-in appliance.

This cooling box is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the cooling box. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:

Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications

Function description

The cooler can chill products and keep them cool. A low maintenance refrigerant circuit with compressor provides the cooling. The generous insulation and powerful compressor ensure efficient and fast cooling.

The cooler is portable.

The cooler can withstand a short-term inclination of 30°, for example on boats.

Scope of functions

battery monitor to protect the vehicle battery switches off automatically at low battery voltage
Electronic system to prevent polarity reversal
Display with temperature gauge

Operating and display elements

Lid latch (fig. 1, page 3) Operating panel (fig. 2, page 3)

MOBICOOL-MCG15-15L-Compressor-Cooler -fig 1

Item	Description	Explanation
1	POWER “P”	Switches the cooler on or off when the button is pressed for two

seconds
2| Display screen| Shows the information
3| “+”| To increase the value press the button once.
4| | To enter setting mode press the button once.
| To set the temperature ( –18 °C to +20 °C) press the button
twice and choose a value using “+” and “-”. The set tempera-
ture will flash 3 times. The flashing temperature will be saved
after 5 seconds.
To set the brightness press the button three times and choose
a value using “+” and “-” (Bright d0 > d1 > d2 Dark).
The setting button will be locked automatically after
15 seconds without any operation.
To unlock the buttons press this button for 3 seconds. A beep-
ing sound confirms the unlocking.

MOBICOOL-MCG15-15L-Compressor-Cooler -fig 6

Operation

Before initial use

NOTE
Before starting your new cooler for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to the chapter “Cleaning and maintenance” on page 15).

Saving energy

Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the cooling device to keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
If the cooler has a basket: For optimal energy consumption, position the basket according to its position on delivery.
On a regularly basis, make sure the lid seal still fits properly.
Defrost the cooler once a layer of ice forms.
Avoid unnecessarily low temperatures.

Using the fused DC plug

NOTICE! Damage hazard
Failure to obey this instruction may result in damage to the device.

For protection of the device the DC cable supplied includes a fuse inside the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
Disconnect the cooling device and other consumer units from the vehicle battery before you connect the vehicle battery to a quick charging device.
Overvoltage can damage the electronics of the cooling device.

Plug the DC connection cable into the DC voltage socket of the cooler (fig. 3 1, page 3).

MOBICOOL-MCG15-15L-Compressor-Cooler -fig 2
Connect the connection cable to a DC power outlet.

Connecting to an AC power supply

DANGER! Electrocution hazard
Failure to obey these warnings will result in death or serious injury.

Never handle plugs and switches with wet hands or if you are standing on a wet surface.
If you are operating your cooler on board a boat from a AC power supply, you must install a residual current circuit breaker between the AC power supply and the cooler.
Seek advice from a trained technician.

Plug the AC connection cable into the AC voltage socket of the cooler (fig. 3 6,page 3).

MOBICOOL-MCG15-15L-Compressor-Cooler -fig 2

Connect the connection cable to an AC power outlet.

Using the battery monitor

NOTICE! Damage hazard
Failure to obey this instruction may result in damage to the battery. When switched off by the battery monitor, the battery will no longer be fully charged. Avoid starting repeatedly or operating current consumers without longer charging phases. Ensure that the battery is recharged.

The device is equipped with a multi-level battery monitor that protects your vehicle battery against excessive discharging when the device is connected to the on-board DC supply.
If the cooler is operated when the vehicle ignition is switched off, the cooler switches off automatically as soon as the supply voltage falls below a set level. The cooler will switch back on once the battery has been recharged to the restart voltage level.

Switch-off voltage at 12 V	11 V
Restart-voltage at 12 V	12 V
Switch-off voltage at 24 V	21.5 V
Restart voltage at 24 V	23.0 V

Using the cooler

NOTICE! Damage hazard
Failure to obey this instruction may result in damage to the device. Ensure at all times that there is sufficient ventilation so that the heat that generated during operation can dissipate. Ensure that the ventilation slots are not covered. Make sure that the device is sufficiently far away from walls and other objects so that the air can circulate. We recommend keeping a gap of at least 50 mm around ventilation holes.

Place the cooler on a firm foundation.

NOTE

Place the cooler as shown (fig. 1, page 3). If you operate the cooler in a different orientation it can be damaged.

NOTICE! EXCESSIVELY LOW TEMPERATURE HAZARD Failure to obey this instruction may result in damage to the objects placed in the cooler.
Ensure that only those objects are placed in the cooler that are intended to be cooled at the selected temperature.

NOTE – Displayed temperature
The temperature displayed is that of the middle of the interior. The temperature elsewhere can deviate from this temperature.

NOTE
When operating from a battery, the display switches off automatically if the battery voltage is low.

To avoid food waste, note the following:

Keep temperature fluctuation as low as possible. Only open the cooling box as often and for as long as necessary. Store the foodstuff in such a way that the air can still circulate well.
Adjust the temperature to the quantity and type of the foodstuff.
Foodstuff can easily absorb or release odor or taste. Always store food-stuff covered or in closed containers/bottles.

Latching the cooler lid

Lift the latch (fig.1, page 3) and close the lid.
Release the latch.
The latch audibly clicks in place and secures the cooling device lid.

Setting the temperature

To unlock the buttons press the tick button for 3 seconds(fig.24, page 3).
A beeping sound confirms the unlocking.
To enter setting mode press the tick button once.
To enter temperature settings press the tick button once.
Use the “+” (fig.23, page 3) and “–” (fig.25, page 3) buttons to select the cooling temperature.
The set temperature appears in the display for a few seconds. The display flashes several times and then the current temperature is displayed again.
Switching off the cooler
Empty the cooler.
Switch the cooler off.
Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
Leave the lid slightly open. This prevents odor build-up.

Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the evaporator.
This reduces the cooling capacity.

NOTICE! Damage hazard
Failure to obey this instruction may result in damage to the device.
Never use hard or pointed tools to remove ice or to loosen objects which have frozen in place.

To defrost the cooler, proceed as follows:

Take out the contents of the cooler.
If necessary, place them in another cooling device to keep them cool.
Switch off the device.
Leave the lid open.
Wipe off the defrosted water.

Replacing the fuse

WARNING! Electrocution hazard
Failure to obey this warning will result in death or serious injury.
Disconnect the power supply and the connection cable before you replace the device fuse.

Disconnect the power supply to the device.

Remove the connection cable.
Replace the fuse (8 A 32 V) as shown (fig.4, page 3).
Reconnect the power supply to the device

Cleaning and maintenance

WARNING! Electrocution hazard
Failure to obey this warning could result in death or serious injury. Always disconnect the device from the power supply before you clean and service it.

NOTICE! Damage hazard
Failure to obey these instructions may result in damage to the device.

Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooler.

➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any dust and dirt, so that heat can be released and the device is not damaged.

Troubleshooting

Warranty

The statutory warranty period applies. If the product is defective, please contact the manufacturer’s branch in your country (see dometic.com/dealer) or your retailer.
For repair and warranty processing, please include the following documents when you send in the device: