MIDLAND CR2032 BTTalk Button Instructions

MIDLAND CR2032 BTTalk Button

Specifications:

• Frequency : 2.4GHz
• Output power : 10mW
• Battery type : 3V LITHIUM CR2032+
• Produced or imported by: Midland Europe srl Via R. Sevardi 7 – 42124 Reggio Emilia Italia

Product Usage Instructions

1. Getting started
   Insert the connector into the octagonal button making sure it is completely plugged in: the circles must remain inside the octagon.

2. Installation:

   • Velcro A (female) must be positioned below the octagonal button on the side of the screws.
   • Fix the wired button on the left-hand knob using the silicone strap.
   • Apply velcro B (male part) to the handlebar of the motorbike, to an area where the octagonal button will remain fixed.
   • Clean the surface before applying the adhesive.

3. Installing BTTalk on Your Phone:
   Make sure to have installed the BTTalk app on your smartphone and to have completed the registration process

4. Button Pairing:

   • Press button A (it is visible for the pairing)
   • Then keep pressing buttons A and B at the same time for 15 seconds. Release them (this will make a reset of the pairings)
   • Press again button A (the button is visible and ready to be paired)
   • The button will remain visible for 30 seconds; to extend the time, press button A again.

5. Pairing the Phone:

   • Open the BTTalk app and click on the button in the top right corner.
   • Then click on “Bluetooth management”.
   • “BTTButton/PTTDual” will be shown on the display; click on this indication and confirm the pairing

6. Confirmation of Correct Pairing:

   • Once the button has been correctly paired and connected to BTTalk, the icon will turn white.
   • To connect the BTT BUTTON again after it has been switched off or in case it went out of range, make sure to have the app opened and click on the button

7. Using an Intercom Device:

   • The BTTalk APP has been mainly designed for Midland intercom devices, but it’s also compatible with units of other brands.
   • After having paired and connected the intercom device to the phone, the icon will turn white.
   • From now on, the microphone and speaker of the intercom device will be used instead of those of the phone.

8. Battery Type:
   BTT Button uses a button battery CR2032, which has a lifetime of 2 years approximately. When it is discharged, its icon will be displayed on BTTalk .

9. Replacing the Battery:
   To replace the battery, remove the screws from the bottom cover of the octagonal button.

Download BTTalk App

European CE Notice Certification and Safety Approval Information
This product is ked feeling to She A Direct in an ire use in all the EU countries, Users are not permitted to make any changes or modifications to the device. Modifications that are not expressly approved by the producer invalidate the warranty card. For further information, please go to our website: www.midlandeurope.com

FAQ

How do I know when to replace the battery?
The battery icon will be displayed on BTTalk when the battery is discharged and needs replacement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>