QSx-G2 HAZ Oil Quality Ex-Sensor User Guide

June 12, 2024
Sensor

SENSOR OQSx-G2 HAZ
QUICK START GUIDE

WHAT’S IN THE BOX?

SENSOR QSx G2 HAZ Oil Quality Ex Sensor - IN THE BOXSENSOR QSx G2 HAZ Oil Quality Ex Sensor - IN THE BOX
2

  • Configuration & Data software (CADs )
  • Manuals
  • Quick Start Guide

CONFIGURE

  1. Allow Configuration Cable to install and update drivers.
  2. Install CADS by scanning the QR code below or go to: www.tandeltasystems.com/support/
  3. Select the correct comms protocol and oil type.

SENSOR QSx G2 HAZ Oil Quality Ex Sensor - CONFIGURE

INSTALL

OrientationSENSOR QSx G2 HAZ Oil Quality Ex Sensor -
Orientation ** Sensor may not function if installed incorrectly
Immersion**

Location options

  1. OEM Port
  2. Tan Delta Manifold
  3. Oil Filter

SENSOR QSx G2 HAZ Oil Quality Ex Sensor - Location
options NOTE: Refer to Master User Guide for additional safety information regarding installation

CONNECT

SENSOR QSx G2 HAZ Oil Quality Ex Sensor - CONNECT Comparing electrical output with oil condition and temp.

ACTIVATION STEPS

Check installation ……………..
Power on ……………..
Wait for 1 minute ……………..
Check output ……………..

TROUBLESHOOTING

  1. Check configuration.
  2. Refer to Installation Drawing 401-0229 on USB
  3. Refer to Master User Guide: www.tandeltasystems.com/support
  4. Contact: [email protected]

INTERPRETING OIL CONDITION

SENSOR QSx G2 HAZ Oil Quality Ex Sensor - Interpreting Oil
condition

SUPPORT – FAQ

If you have any issues, please read the tips below before contacting us for further support.

1. Where are the Cable X drivers?

The drivers for Cable X should install automatically. If needed, they are also available on the USB stick supplied with the product.

2. Does the sensor require cleaning?

No, cleaning is required once the sensor is installed. However, when using the sensor for testing offline samples (i.e. MOT Kit), then cleaning between samples is essential.

3. I cannot see my oil in the database, so I have used an oil which I believe is close, but the sensor isn’t working?

4. Where can I obtain the EU and UK Declaration of Conformity?

5. I need help sourcing a suitable ATEX Barrier for my application?

You can find further information in the Master User Guide on the support page of our website. If you have any further questions, please contact our support team by email: [email protected] who will answer no later than the next working day.

Alternatively, refer to Master User Guide
available at: www.tandeltasystems.com/support

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Sensor User Manuals

Related Manuals