LASFIT LW30CBSTW LED Light Bars Instruction Manual
- June 9, 2024
- LASFIT
Table of Contents
EQUIPPED FOR ADVENTURE WITH CONFIDENCE!
LED LIGHT BAR
KIT INCLUDES
Size (inch)
12″
22″
32″| Items| Package
---|---|---
• LED Light Bar xl
• Side Mount Accessories:
M825mm Bolt x2
MS Nut x2
08mm Flat Washers x4
d8mm Spring Washer x4
Side Mounting Bracket x2
M616mm Hex Socket Cap Screws x2
M8 Allen key xl
• Bottom Mount Accessories:
M825mm Bolt x2
MS Nut x2
d8mm Flat Washers x2
b8mm Spring Washer x2
M622mm Hex Socket Cap Screws x2
M6 Nut x2
d6mm Flat Washers x2
Note: A wiring harness is not included in the package. You can order a wiring harness from Lasfit if needed.”
PRODUCT SPECIFICATION
| Brand: | Lasfit |
|---|---|
| Color: | White, Amber |
| Size(inch): | 12″, 22″, 32″, 42″, 52″ |
| Wattage: | 12″-30W, 22″-60W, 32″-90W, 42″-120W, 52″-150W |
| Raw Output(Lumens): | 12″-5200LM, 22″-10500LM, 32″-15700LM, 42″-20900LM, |
52″-26100LM
Measured Output(Lumens):| 12″-3220LM, 22″-6020LM, 32″-8560LM, 42″-11290LM,
52″-14230LM
Beam Pattern:| Spot and Flood Combo Beam
Color Temperature:| 6000K (White), 2000K (Amber)
LED Chips:| Osram’s OSCONIQ® P 3737 LED
Output Voltage:| 9-36V
Waterproof Rating:| IP67
Connector Type:| DT Port
Optical Accessories:| Reflective Bowl
Warranty:| 3-Year Hassle-Free Warranty+45 Days Money-Back Guarantee
Material:| 6063 Aviation Aluminum; Osram Led Chips; PC Lens.
Install Positions:| 12″ (Versatile); 22″&32″(Bumper/Grille);
42″&52″(Windshield/Roof).
PRODUCT DIMENSIONS
| 12″.22″LED Light Bar Dimension | 32″,42″,52″LED Light Bar Dimension |
|---|
|
KEY FEATURES
Superior Brightness Guide You Off The Road
- High luminous efficiency Osram LED chips
- Spot/flood combo beam
- High transmittance PC lens
Beginner-Friendly Installation
- Plug and play DT Port connector
- Adjustable mounting bracket to 360°
- Dual options for side and back mount
Unique Design Built For Off-Road
- Sleek, low-profile, slim, and single-row design
- Durable die-cast aluminum structure
- IP67 waterproof and dustproof
INSTALLATION MANUAL
Step 1. Determine The Mounting Location And Measure The Size.
One way to ensure the best performance of your light bars is to choose the
best mounting location for them. Common mounting locations include:
Bumper Mount: front bumper/rear bumper
Grille Mount: upper grille/lower grille
Roof Mount: rooftop/rear roof
Windshield Mount: lower windshield/above the windshield
Note: The perfect mounting options often depend on your specific vehicle,
personal preferences, mounting brackets, technical abilities, and most
importantly, the accurate measurement results.
Step 2. Mounting Brackets With The Provided Hardware.
The light bar comes in two different mounting styles, you can choose to
install it from the side or from the back.
Note: Our kits come with universal mounts, Custom Modification might be
needed to mount them.
We have some Vehicle-specific Brackets for you to choose from, you can check
on lasfit.com.
Step 3. Connect The Power Cable And Wiring Harness.
3.1 Connect the light bar plug to the DT-Port connector included with the
harness.
3.2 Connect the red wire to the positive supply and the black wire to the
negative or common ground.
3.4 Pass the wiring harness through the firewall and leave part of the
switch segment in the vehicle.
3.5 Press the switch to test if the lights are working properly.
3.6 Adjust the light to the desired angle and then secure by tightening
all mounting screws.
FAQ
Q1: What should I do if the light bar does not work after installation?****
– A: Please follow the below troubleshooting process to find out if it is a
quality issue:
– Step 1. Check and make sure positive and negative are properly connected.
– Step 2. Check and see if the LED light on the switch light up, if no light,
check the battery connection and fuse.
– When positive”+·· and negative”-” are connected correctly. The green or
red light will be on.
– Step 3. Press the on/off switch you should hear a “click” sound from the
relay.
– If you can’t hear a “click” sound, the relay has defected. If you can hear a
“click” sound from the relay, use a multimeter to check the DT connector.
– (Make sure the light is green, which indicates it is ON and sending power to
the DT plug)
Q2: How to get the moisture/water condensation out of the light bar?****
– A: When you drive on continuous rainy days or trail in extremely inclement
weather for a long time, the water vapor in the air may condense into moisture
to the interior of the lampshade due to the difference in temperature and
humidity outside, so this is normal to see the moisture inside. Please follow
the below steps to keep moisture out of the light bar:
– Step 1: Please remove the breather hole with a5/16 wrench behind the light
bar.
– Step 2: Let the light bar stay on for more than 30 minutes and wait for the
condensation to disappear.
– Step 3: Then put the exhaust valve screw back before turning off the light
bar, that will be fine after finishing.
OUR GUARANTEES
| 45 Days Money-Back Return/Exchange
---|---
| 3 Year Hassle Free Warranty
| Free Shipping
| Customer Support Team in Ontario, California
Email:[email protected]
Call:909-758-7900 Mon. – Fri. 9:00
am-5:30 pm (PST)
Location: 2235 E 4th St Ste F Ontario, CA 91764 United States
www.lasfit.com
Documents / Resources
|
LASFIT LW30CBSTW LED Light
Bars
[pdf] Instruction Manual
LW30CBSTW LED Light Bars, LW30CBSTW, LED Light Bars, Light Bars, Bars
---|---